|
|
PDF MAX9142 Data sheet ( Hoja de datos )
| Número de pieza | MAX9142 | |
| Descripción | 40ns / Low-Power / 3V/5V / Rail-to-Rail Single-Supply Comparators | |
| Fabricantes | Maxim Integrated | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de MAX9142 (archivo pdf) en la parte inferior de esta página. Total 15 Páginas | ||
|
No Preview Available !
MAX9140/MAX9141/
MAX9142/MAX9144
40ns, Low-Power, 3V/5V, Rail-to-Rail
Single-Supply Comparators
General Description
The MAX9140/MAX9141 are single and the MAX9142/
MAX9144 are dual/quad high-speed comparators optimized
for systems powered from a 3V or 5V supply. The MAX9141
features latch enable and device shutdown. These devices
combine high speed, low power, and rail-to-rail inputs.
Propagation delay is 40ns, while supply current is only
150μA per comparator.
The input common-mode range of the devices extends beyond
both power-supply rails. The outputs pull to within 0.3V of
either supply rail without external pullup circuitry, making these
devices ideal for interface with both CMOS and TTL logic. All
input and output pins can tolerate a continuous short-circuit
fault condition to either rail. Internal hysteresis ensures clean
output switching, even with slow-moving input signals.
The devices are higher-speed, lower-power, and lower-
cost upgrades to industry-standard comparators MAX941/
MAX942/MAX944.
The MAX9140 are offered in tiny 5-pin SC70 and SOT23
packages. The MAX9141 and MAX9142 are available in
8-pin SOT23 and SO packages, while the MAX9144 is
available in both 14-pin SO and TSSOP packages.
Applications
●● Line Receivers
●● Battery-Powered Systems
●● Threshold Detectors/Discriminators
●● 3V/5V Systems
●● Zero-Crossing Detectors
●● Sampling Circuits
Features
●● Fast, 40ns Propagation Delay (10mV Overdrive)
●● Low Power
• 150μA Supply Current Per Comparator (3V)
●● Optimized for 3V and 5V Applications
●● Rail-to-Rail Input Voltage Range
●● Low, 500μV Offset Voltage
●● Internal Hysteresis for Clean Switching
●● Outputs Swing 300mV of Power Rails
●● CMOS/TTL-Compatible Outputs
●● Output Latch (MAX9141 Only)
●● Shutdown Function (MAX9141 Only)
●● Available in SC70 and SOT23 Packages
Ordering Information
PART*
PIN-PACKAGE
TOP MARK
MAX9140AAUK+T
MAX9140AAXK+T
5 SOT23
5 SC70
+AFEJ
+ASW
MAX9140EXK-T
5 SC70
ACC
MAX9140EUK-T
5 SOT23
ADQP
MAX9141EKA-T
8 SOT23
AAFD
MAX9141ESA
8 SO
—
MAX9142EKA-T
8 SOT23
AAFE
MAX9142ESA
8 SO
—
MAX9144EUD
14 TSSOP
—
MAX9144ESD
14 SO
—
Note: All E-grade devices are specified over the -40°C to +85°C
operating temperature range. All A-grade devices are specified
over the -40°C to +125°C operating temperature range.
+Denotes a lead(Pb)-free/RoHS-compliant package.
-Denotes a package containing lead(Pb).
T = Tape and reel.
Pin Configurations
TOP VIEW
OUT 1
GND 2
IN+ 3
MAX9140 5 VCC
VCC 1
IN+ 2
IN- 3
GND 4
4 IN-
SC70/SOT23
MAX9141
SOT23/SO
8 N.C. OUTA 1
7 OUT INA- 2
6 SHDN
5 LE
INA+ 3
GND 4
MAX9142
A
B
SOT23/SO
OUTA 1
INA- 2
8 VCC
INA+ 3
7 OUTB
6 INB-
VCC 4
INB+ 5
5 INB+
INB- 6
OUTB 7
14 OUTD
13 IND-
AD
12 IND+
MAX9144
BC
11 GND
10 INC+
9 INC-
8 OUTC
TSSOP/SO
19-2064; Rev 6; 10/15
1 page  
MAX9140/MAX9141/
MAX9142/MAX9144
40ns, Low-Power, 3V/5V, Rail-to-Rail
Single-Supply Comparators
Typical Operating Characteristics (continued)
(VCC = 3.0V, VCM = 0V, CL = 15pF, VOD = 10mV, TA = +25°C, unless otherwise noted.)
500
400
300
200
100
0
-100
-200
-300
-400
-500
-50
7
6
5
INPUT OFFSET VOLTAGE
vs. TEMPERATURE
-25 0 25 50 75
TEMPERATURE (°C)
INPUT VOLTAGE RANGE
vs. TEMPERATURE
100
VCMR+
VCC = 5.5V
4
3
2
1
0
-1
-40
50
VCMR-
-20 0 20 40 60 80
TEMPERATURE (°C)
PROPAGATION DELAY
vs. TEMPERATURE
100
45
tPD+
40
tPD-
35
30
25
-50
-25 0 25 50 75
TEMPERATURE (°C)
100
1.0
0.8
0.6
0.4
0.2
0
-0.2
-0.4
-0.6
-0.8
-1.0
-50
45
TRIP POINT
vs. TEMPERATURE
VTRIP+
VTRIP-
-25 0 25 50 75
TEMPERATURE (°C)
PROPAGATION DELAY
vs. INPUT OVERDRIVE
100
40
tPD+
35
tPD-
30
25
20
0
20 40 60 80
INPUT OVERDRIVE (mV)
100
PROPAGATION DELAY
vs. CAPACITIVE LOAD
55
50
45 tPD+
40
35 tPD-
30
25
20
15
30 45 60 75 90
CAPACITIVE LOAD (pF)
105
www.maximintegrated.com
Maxim Integrated │ 5
5 Page 
MAX9140/MAX9141/
MAX9142/MAX9144
40ns, Low-Power, 3V/5V, Rail-to-Rail
Single-Supply Comparators
Package Information (continued)
For the latest package outline information and land patterns (footprints), go to www.maximintegrated.com/packages. Note that a “+”,
“#”, or “-” in the package code indicates RoHS status only. Package drawings may show a different suffix character, but the drawing
pertains to the package regardless of RoHS status.
www.maximintegrated.com
Maxim Integrated │ 11
11 Page | ||
| Páginas | Total 15 Páginas | |
| PDF Descargar | [ Datasheet MAX9142.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| MAX914 | 40ns / Low-Power / 3V/5V / Rail-to-Rail Single-Supply Comparators | Maxim Integrated |
| MAX9140 | 40ns / Low-Power / 3V/5V / Rail-to-Rail Single-Supply Comparators | Maxim Integrated |
| MAX9141 | 40ns / Low-Power / 3V/5V / Rail-to-Rail Single-Supply Comparators | Maxim Integrated |
| MAX9142 | 40ns / Low-Power / 3V/5V / Rail-to-Rail Single-Supply Comparators | Maxim Integrated |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |