|
|
PDF SFH610A Data sheet ( Hoja de datos )
| Número de pieza | SFH610A | |
| Descripción | Optocoupler | |
| Fabricantes | Vishay | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de SFH610A (archivo pdf) en la parte inferior de esta página. Total 9 Páginas | ||
|
No Preview Available !
www.vishay.com
Alternative Device Available
SFH610A, SFH6106
Vishay Semiconductors
Optocoupler, Phototransistor Output, High Reliability, 5300 VRMS
SFH610A
A1
C2
4E
3C
SFH6106
A1
4E
C2
3C
i179056
DESCRIPTION
The SFH6 10A (D IP) and S FH6106 (SMD ) fe ature a high
current transfer ra tio, low co upling ca pacitance an d h igh
isolation volta ge. These c ouplers h ave a Ga As in frared
diode emitter, which is optically coupled to a silicon planar
phototransistor detector, and is incorporated in a pl astic
DIP-4 or SMD package.
The coupling devices are designed for signal transmission
between two electrically separated circuits.
The couplers are end-stackable with 2.54 mm spacing.
Creepage a nd clearance distan ces of > 8.0 mm a re
achieved with option 6. This version comp lies with
IEC 60 950 (DIN VDE 0 805) for re inforced i nsulation up to
an oper ation voltage of 40 0 VRMS or DC. Speci fications
subject to change.
FEATURES
• Good CTR linearity depending on forward
current
• Isolation test voltage, 5300 VRMS
• High collector emitter voltage, VCEO = 70 V
• Low saturation voltage
• Fast switching times
• Low CTR degradation
• Temperature stable
• Low coupling capacitance
• End stackable, 0.100" (2.54 mm) spacing
• High common mode interference immunity
• Lead (Pb)-free component
• Material cat egorization: Fo r def initions of compliance
please see www.vishay.com/doc?99912
AGENCY APPROVALS
• UL1577, file no. E52 744 syste m code H or J, double
protection
• DIN EN 60747-5-5 (VDE 0884) available with option 1
• CSA 93751
• BSI IEC 60950; IEC 60065
ORDERING INFORMATION
PART
REMARKS
SFH610A-1
SFH610A-2
SFH610A-3
SFH610A-4
SFH610A-5
SFH6106-1
SFH6106-2
SFH6106-3
SFH6106-4
SFH6106-5T
SFH610A-1X006
SFH610A-1X018T
SFH610A-2X006
SFH610A-3X006
SFH610A-3X007
SFH610A-4X006
CTR 40 % to 80 %, DIP-4
CTR 63 % to 125 %, DIP-4
CTR 100 % to 200 %, DIP-4
CTR 160 % to 320 %, DIP-4
CTR 250 % to 500 %, DIP-4
CTR 40 % to 80 %, SMD-4
CTR 63 % to 125 %, SMD-4
CTR 100 % to 200 %, SMD-4
CTR 160 % to 320 %, SMD-4
CTR 250 % to 500 %, SMD-4, tape and reel
CTR 40 % to 80 %, DIP-4 400 mil
CTR 40 % to 80 %, SMD-4 400 mil, wide leadspread
CTR 63 % to 125 %, DIP-4 400 mil
CTR 100 % to 200 %, DIP-4 400 mil
CTR 100 % to 200 %, SMD-4
CTR 160 % to 320 %, DIP-4 400 mil
Note
• For additional information on the available options refer to option information.
Rev. 2.2, 23-May-13
1 Document Number: 83666
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
http://www.Datasheet4U.com
1 page  
www.vishay.com
Alternative Device Available
SFH610A, SFH6106
Vishay Semiconductors
SAFETY AND INSULATIO RATINGS
PARAMETER
TEST CONDITION
SYMBOL
MIN.
TYP.
MAX.
UNIT
Climatic classification
(according to IEC 68 part 1)
55/100/21
Comparative tracking index
VIOTM
VIORM
PSO
ISI
TSI
Creepage distance
Clearance distance
standard DIP-4
standard DIP-4
CTI 175
10000
890
7
7
399
V
V
400 mW
275 mA
175 °C
mm
mm
Creepage distance
400 mil DIP-4
8
mm
Clearance distance
Insulation thickness,
reinforced rated
400 mil DIP-4
per IEC 60950 2.10.5.1
8
0.4
mm
mm
Note
• As per IEC 60747-5-2, § 7.4.3.8.1, this optocoupler is suitable for "safe electrical insulation" only within the safety ratings. Compliance with
the safety ratings shall be ensured by means of protective circuits.
TYPICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)
I F R L = 75 Ω
VCC = 5 V
IC
IF
1. 0 k Ω
VCC = 5 V
isfh610a_01
47 Ω
Fig. 1 - Linear Operation (without saturation)
isfh610a_02
47 Ω
Fig. 3 - Switching Operation (with saturation)
%
103
IC 5
IF
102
5
IF = 10 mA, VCC = 5.0 V
4
3
2
1
101
- 25
isfh610a_03
0 25
TA (°C)
50
75
Fig. 2 - Current Transfer Ratio (CTR) vs. Temperature
30
Ic mA
IF = 14 mA
IF = 12 mA
20
IF = 10 mA
IF = 8 mA
10 IF = 6 mA
IF = 4 mA
IF = 1 mA
IF = 2 mA
0
01
isfh610a_04
5V 10
5
VCE
Fig. 4 - Output Characteristics (typ.) Collector Current vs.
Collector Emitter Voltage
Rev. 2.2, 23-May-13
5 Document Number: 83666
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
5 Page | ||
| Páginas | Total 9 Páginas | |
| PDF Descargar | [ Datasheet SFH610A.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| SFH610 | 2.8KV TRIOS OPTOCOUPLERS HIGH RELIABILITY |  Siemens Semiconductor Group |
| SFH610-2 | LOW INPUT CURRENT PHOTOTRANSISTOR |  ISOCOM |
| SFH610-2X | LOW INPUT CURRENT PHOTOTRANSISTOR | ISOCOM |
| SFH610-3 | LOW INPUT CURRENT PHOTOTRANSISTOR | ISOCOM |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |