|
|
Número de pieza | MKP9V160 | |
Descripción | Sidac High Voltage Bidirectional Triggers | |
Fabricantes | ON Semiconductor | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de MKP9V160 (archivo pdf) en la parte inferior de esta página. Total 5 Páginas | ||
No Preview Available ! MKP9V160
Preferred Device
Sidac High Voltage
Bidirectional Triggers
Bidirectional devices designed for direct interface with the ac power
line. Upon reaching the breakover voltage in each direction, the device
switches from a blocking state to a low voltage on−state. Conduction
will continue like a Triac until the main terminal current drops below
the holding current. The plastic axial lead package provides high pulse
current capability at low cost. Glass passivation insures reliable
operation.
Features
• High Pressure Sodium Vapor Lighting
• Strobes and Flashers
• Ignitors
• High Voltage Regulators
• Pulse Generators
• Used to Trigger Gates of SCR’s and Triacs
• Indicates UL Registered − File #E116110
• Pb−Free Package is Available
MAXIMUM RATINGS (TJ = 25°C unless otherwise noted)
Rating
Symbol Value
Unit
Peak Repetitive Off−State Voltage
(Sine Wave, 50 to 60 Hz, TJ = − 40 to 125°C)
On-State Current RMS
(TL = 80°C, Lead Length = 3/8″″
All Conduction Angles)
VDRM,
VRRM
IT(RMS)
"90
"0.9
V
A
Peak Non−repetitive Surge Current
(60 Hz One Cycle Sine Wave, TJ = 125°C)
Operating Junction Temperature Range
Storage Temperature Range
THERMAL CHARACTERISTICS
ITSM
"4.0
A
TJ −40 to +125 °C
Tstg −40 to +150 °C
Rating
Symbol
Max
Unit
Thermal Resistance, Junction−to−Lead
Lead Length = 3/8″
RqJL
40 °C/W
Lead Solder Temperature
(Lead Length w 1/16″ from Case, 10 s Max)
TL
260 °C
Stresses exceeding Maximum Ratings may damage the device. Maximum
Ratings are stress ratings only. Functional operation above the Recommended
Operating Conditions is not implied. Extended exposure to stresses above the
Recommended Operating Conditions may affect device reliability.
*For additional information on our Pb−Free strategy and soldering details, please
download the ON Semiconductor Soldering and Mounting Techniques
Reference Manual, SOLDERRM/D.
© Semiconductor Components Industries, LLC, 2006
February, 2006 − Rev. 1
1
www.DataSheet4U.com
http://onsemi.com
SIDACS ( )
0.9 AMPS RMS, 160 VOLTS
MT1
MT2
DO−41
AXIAL LEAD
CASE 59
STYLE 2
MARKING DIAGRAM
A
MKP
9V160
YYWW G
G
A = Assembly Location
Y = Year
WW = Work Week
G = Pb−Free Package
(Note: Microdot may be in either location)
ORDERING INFORMATION
Device
MKP9V160RL
Package
Shipping†
Axial Lead* 5000 Tape & Reel
MKP9V160RLG Axial Lead* 5000 Tape & Reel
†For information on tape and reel specifications,
including part orientation and tape sizes, please
refer to our Tape and Reel Packaging Specifications
Brochure, BRD8011/D.
Preferred devices are recommended choices for future use
and best overall value.
Publication Order Number:
MKP9V160/D
1 page MKP9V160
PACKAGE DIMENSIONS
AXIAL LEAD
CASE 59−10
ISSUE U
www.DataSheet4U.com
B
K
F
POLARITY INDICATOR
OPTIONAL AS NEEDED
(SEE STYLES)
D
A
F
K
NOTES:
1. DIMENSIONING AND TOLERANCING PER ANSI
Y14.5M, 1982.
2. CONTROLLING DIMENSION: INCH.
3. ALL RULES AND NOTES ASSOCIATED WITH
JEDEC DO−41 OUTLINE SHALL APPLY
4. POLARITY DENOTED BY CATHODE BAND.
5. LEAD DIAMETER NOT CONTROLLED WITHIN F
DIMENSION.
INCHES
DIM MIN MAX
A 0.161 0.205
B 0.079 0.106
D 0.028 0.034
F −−− 0.050
K 1.000 −−−
MILLIMETERS
MIN MAX
4.10 5.20
2.00 2.70
0.71 0.86
−−− 1.27
25.40 −−−
STYLE 2:
NO POLARITY
ON Semiconductor and
are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice
to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
“Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All
operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights
nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications
intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should
Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates,
and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death
associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal
Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT:
Literature Distribution Center for ON Semiconductor
P.O. Box 61312, Phoenix, Arizona 85082−1312 USA
Phone: 480−829−7710 or 800−344−3860 Toll Free USA/Canada
Fax: 480−829−7709 or 800−344−3867 Toll Free USA/Canada
Email: [email protected]
N. American Technical Support: 800−282−9855 Toll Free
USA/Canada
Japan: ON Semiconductor, Japan Customer Focus Center
2−9−1 Kamimeguro, Meguro−ku, Tokyo, Japan 153−0051
Phone: 81−3−5773−3850
http://onsemi.com
5
ON Semiconductor Website: http://onsemi.com
Order Literature: http://www.onsemi.com/litorder
For additional information, please contact your
local Sales Representative.
MKP9V160/D
5 Page |
Páginas | Total 5 Páginas | |
PDF Descargar | [ Datasheet MKP9V160.PDF ] |
Número de pieza | Descripción | Fabricantes |
MKP9V160 | Sidac High Voltage Bidirectional Triggers | ON Semiconductor |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |