|
|
Número de pieza | AP7365 | |
Descripción | Fast Transient Low Dropout Linear Regulator | |
Fabricantes | Diodes Incorporated | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de AP7365 (archivo pdf) en la parte inferior de esta página. Total 21 Páginas | ||
No Preview Available ! AP7365www.DataSheet4U.com
600mA, Low Quiescent Current, Fast Transient
Low Dropout Linear Regulator
Description
Pin Assignments
The AP7365 is a 600mA, adjustable and fixed output voltage,
low dropout linear regulator. The device included pass
element, error amplifier, band-gap, current limit and thermal
shutdown circuitry. The device is turned on when EN pin is
set to logic high level.
The characteristics of low dropout voltage and low quiescent
current make it suitable for low power applications, for
example, battery powered devices. The typical quiescent
current is approximately 35μA. Built-in current-limit and
thermal-shutdown functions prevent IC from damage in fault
conditions.
This device is available with adjustable output from 0.8V to
5.0V, and fixed version with 0.8V, 1.0V, 1.2V, 1.5V, 1.8V,
2.0V, 2.5V, 2.8V, 3.0V, 3.3V and 3.9V outputs. Please
contact your local sales office for any other voltage options.
The AP7365 is available in SOT25, SOT89/R-3L, SOT223/R-
3L, and DFN2020-6 packages.
Features
• 600mA Low Dropout Regulator with EN
• Very low IQ: 35µA
• Wide input voltage range: 2V to 6V
• Wide adjustable output: 0.8V to 5.0V
• Fixed output options: 0.8V to 3.9V (0.1V step size
possible)
• High PSRR: 65dB at 1kHz
• Fast start-up time: 200µs
• Stable with low ESR, 1µF ceramic output capacitor
• Excellent Load/Line Transient Response
• Low dropout: 300mV at 600mA
• Current limit and short circuit protection
• Thermal shutdown protection
• Ambient temperature range: -40ºC to 85ºC
• SOT25, SOT89/R-3L, SOT223/R-3L, DFN2020-6:
Available in “Green” Molding Compound (No Br, Sb)
• Lead Free Finish/ RoHS Compliant (Note 1)
(Top View)
IN 1
5 OUT
GND 2
EN 3
4 NC
SOT25 (Fixed output)
(Top View)
IN 1
5 OUT
GND 2
EN 3
4 ADJ
SOT25 (Adj output)
(Top View)
EN 1
GND 2
IN 3
6 NC
5 NC
4 OUT
DFN2020-6 (Fixed output)
(Top View)
EN 1
GND 2
IN 3
6 ADJ
5 NC
4 OUT
DFN2020-6 (Adj output)
(Top View)
3 IN
2 GND (TAB)
1 OUT
SOT89-3L (Fixed output)
(Top View)
3 IN
2 GND (TAB)
1 OUT
SOT223-3L (Fixed output)
(Top View)
3 OUT
2 IN (TAB)
1 GND
SOT89R-3L (Fixed output)
(Top View)
3 OUT
2 IN (TAB)
1 GND
SOT223R-3L (Fixed output)
Applications
• Servers and notebook computers
• Low and medium power applications
• FPGA and DSP core or I/O power
• Consumer Electronics
Notes: 1. EU Directive 2002/95/EC (RoHS). All applicable RoHS exemptions applied. Please visit our website at
http://www.diodes.com/products/lead_free.html.
AP7365
Document number: DS32260 Rev. 1 - 2
1 of 21
www.diodes.com
July 2010
© Diodes Incorporated
1 page Typical Performance Characteristics
Start-Up Time
AP7365www.DataSheet4U.com
600mA, Low Quiescent Current, Fast Transient
Low Dropout Linear Regulator
Start-Up Time
VEN=0 to 2V (1V/div)
VIN=5V
CIN=COUT=1μF
VEN=0 to 2V (1V/div)
VIN=5V
CIN=COUT=1μF
VOUT=3.3V (1V/div)
with no load
Time (40μs/div)
Line Transient Response
VIN=4.3V to 5.3V (1V/div)
Tr=Tf=2μs
CIN=none, COUT=1μF
VOUT=3.3V (20mV/div)
IOUT=60mA (200mA/div)
Time (40μs/div)
VOUT=3.3V (1V/div)
with 600mA load
Time (40μs/div)
Line Transient Response
VIN=4.3V to 5.3V (1V/div)
Tr=Tf=2μs
CIN=none, COUT=1μF
VOUT=3.3V (20mV/div)
IOUT=300mA(200mA/div)
Time (40μs/div)
AP7365
Document number: DS32260 Rev. 1 - 2
5 of 21
www.diodes.com
July 2010
© Diodes Incorporated
5 Page AP7365www.DataSheet4U.com
600mA, Low Quiescent Current, Fast Transient
Low Dropout Linear Regulator
Application Note
Input Capacitor
A 1μF ceramic capacitor is recommended between IN and GND pins to decouple input power supply glitch and
noise. The amount of the capacitance may be increased without limit. This input capacitor must be located as
close as possible to the device to assure input stability and reduce noise. For PCB layout, a wide copper trace is
required for both IN and GND pins. A lower ESR capacitor type allows the use of less capacitance, while higher
ESR type requires more capacitance.
Output Capacitor
The output capacitor is required to stabilize and improve the transient response of the LDO. The AP7365 is stable
with very small ceramic output capacitors. Using a ceramic capacitor value that is at least 1μF with ESR > 15mΩ
on the output ensures stability. Higher capacitance values help to improve line and load transient response. The
output capacitance may be increased to keep low undershoot and overshoot. Output capacitor must be placed as
close as possible to OUT and GND pins.
Region of Stable COUT ESR vs. Load Current
100
Unstable Range
10
1
Stable Range
0.1
VIN=4.3V
CIN=COUT=1μF
0.01
0.001
0
Unstable Range
100 200 300 400 500 600
Load Current (mA)
AP7365
Document number: DS32260 Rev. 1 - 2
11 of 21
www.diodes.com
July 2010
© Diodes Incorporated
11 Page |
Páginas | Total 21 Páginas | |
PDF Descargar | [ Datasheet AP7365.PDF ] |
Número de pieza | Descripción | Fabricantes |
AP7361 | 1A LOW DROPOUT ADJUSTABLE AND FIXED-MODE REGULATOR | Diodes |
AP7361C | 1A LOW DROPOUT ADJUSTABLE AND FIXED-MODE REGULATOR | Diodes |
AP7362 | FAST TRANSIENT ULTRA-LOW DROPOUT LINEAR REGULATOR | Diodes |
AP7363 | FAST TRANSIENT ULTRA-LOW DROPOUT LINEAR REGULATOR | Diodes |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |