|
|
Número de pieza | AXA010A0X3 | |
Descripción | SIP Non-isolated Power Modules Programmable | |
Fabricantes | Lineage Power Corporation | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de AXA010A0X3 (archivo pdf) en la parte inferior de esta página. Total 19 Páginas | ||
No Preview Available ! Data Sheet
March 30, 2008
www.DataSheet4U.com
12V Austin LynxTM SIP Non-isolated Power Modules, Programmable:
10Vdc – 14Vdc input; 0.75Vdc to 5.5Vdc Output;10A Output Current
RoHS Compliant
Features
Compliant to RoHS EU Directive 2002/95/EC (-Z
versions)
Compliant to ROHS EU Directive 2002/95/EC with
lead solder exemption (non-Z versions)
Delivers up to 10A output current
High efficiency – 93% at 3.3V full load (VIN = 12.0V)
Small size and low profile:
50.8 mm x 12.7 mm x 8.10 mm
(2.00 in x 0.5 in x 0.32 in)
Low output ripple and noise
Applications
Distributed power architectures
Intermediate bus voltage applications
Telecommunications equipment
Servers and storage applications
Networking equipment
Enterprise Networks
Latest generation IC’s (DSP, FPGA, ASIC)
and Microprocessor powered applications
High Reliability:
Calculated MTBF = 4.4 M hours at 25oC Full-load
Constant switching frequency (300 kHz)
Output voltage programmable from 0.75 Vdc to
5.5Vdc via external resistor
Line Regulation: 0.3% (typical)
Load Regulation: 0.4% (typical)
Temperature Regulation: 0.4 % (typical)
Remote On/Off
Remote Sense
Over temperature protection
Output overcurrent protection (non-latching)
Wide operating temperature range (-40°C to 85°C)
UL* 60950-1Recognized, CSA† C22.2 No. 60950-1-
03 Certified, and VDE‡ 0805:2001-12 (EN60950-1)
Licensed
ISO** 9001 and ISO 14001 certified manufacturing
facilities
Description
The 12V Austin LynxTM Programmable SIP power modules are non-isolated dc-dc converters that can deliver up to
10A of output current with full load efficiency of 93% at 3.3V output. These modules provide a precisely regulated
output voltage ranging from 0.75Vdc to 5.5Vdc, programmable via an external resistor over a wide range of input
voltage (VIN = 10 – 14Vdc). Their open-frame construction and small footprint enable designers to develop cost-
and space-efficient solutions. Standard features include remote On/Off, remote sense, output voltage adjustment,
overcurrent and overtemperature protection.
* UL is a registered trademark of Underwriters Laboratories, Inc.
† CSA is a registered trademark of Canadian Standards Association.
‡ VDE is a trademark of Verband Deutscher Elektrotechniker e.V.
** ISO is a registered trademark of the International Organization of Standards
Document No: DS03-098 ver. 1.41
PDF name: austin lynx sip 12v x3.pdf
1 page Data Sheet
March 30, 2008
12V Austin LynxTM SIP Non-isolated Power Modules, Programmable:
10Vdc – 14Vdc input; 0.75Vdc to 5.5Vdc Output;10A Owwuwtp.DuattaCShuererte4Un.tcom
Feature Specifications
Unless otherwise indicated, specifications apply over all operating input voltage, resistive load, and temperature
conditions. See Feature Descriptions for additional information.
Parameter
Device Symbol Min
Typ
Max Unit
On/Off Signal interface
(On/Off is open collector/drain logic input;
Signal referenced to GND - See feature description
section)
Input High Voltage (Module ON)
All VIH ―
― VIN, max V
Input High Current
All IIH ― ―
10 μA
Input Low Voltage (Module OFF)
All VIL ― ― 0.3 V
Input Low Current
All IIL ― ―
1 mA
Turn-On Delay and Rise Times
(IO=IO, max , VIN=VIN, nom, TA = 25 oC)
Case 1: On/Off input is set to Logic Low (Module
ON) and then input power is applied (delay from
instant at which VIN = VIN, min until Vo=10% of Vo,set)
Case 2: Input power is applied for at least one second
and then the On/Off input is set to logic Low (delay from
instant at which Von/Off=0.3V until Vo=10% of Vo, set)
All
All
Tdelay
Tdelay
―
―
3
3
― msec
― msec
Output voltage Rise time (time for Vo to rise from 10% All Trise ―
of Vo,set to 90% of Vo, set)
4
6 msec
Output voltage overshoot – Startup
― 1 % VO, set
IO= IO, max; VIN = 10.0 to 14.0Vdc, TA = 25 oC
Remote Sense Range
― ― 0.5 V
Overtemperature Protection
All Tref ⎯ 125 ⎯ °C
(See Thermal Consideration section)
Input Undervoltage Lockout
Turn-on Threshold
All 8.2 V
Turn-off Threshold
All 8.0 V
LINEAGE POWER
5
5 Page Data Sheet
March 30, 2008
12V Austin LynxTM SIP Non-isolated Power Modules, Prowgwrwa.DmatmaSahbeelet4:U.com
10Vdc – 14Vdc input; 0.75Vdc to 5.5Vdc Output;10A Output Current
Design Considerations (continued)
Output Filtering
The 12V Austin Lynx Programmable SIP module is
designed for low output ripple voltage and will meet the
maximum output ripple specification with 1 µF ceramic
and 10 µF tantalum capacitors at the output of the
module. However, additional output filtering may be
required by the system designer for a number of
reasons. First, there may be a need to further reduce
the output ripple and noise of the module. Second, the
dynamic response characteristics may need to be
customized to a particular load step change.
To reduce the output ripple and improve the dynamic
response to a step load change, additional capacitance
at the output can be used. Low ESR polymer and
ceramic capacitors are recommended to improve the
dynamic response of the module. For stable operation
of the module, limit the capacitance to less than the
maximum output capacitance as specified in the
electrical specification table.
Safety Considerations
For safety agency approval the power module must be
installed in compliance with the spacing and separation
requirements of the end-use safety agency standards,
i.e., UL 60950-1, CSA C22.2 No. 60950-1-03, and VDE
0850:2001-12 (EN60950-1) Licensed.
For the converter output to be considered meeting the
requirements of safety extra-low voltage (SELV), the
input must meet SELV requirements. The power
module has extra-low voltage (ELV) outputs when all
inputs are ELV.
The input to these units is to be provided with a fast-
acting fuse with a maximum rating of 15A in the positive
input lead.
LINEAGE POWER
11
11 Page |
Páginas | Total 19 Páginas | |
PDF Descargar | [ Datasheet AXA010A0X3.PDF ] |
Número de pieza | Descripción | Fabricantes |
AXA010A0X3 | SIP Non-isolated Power Modules Programmable | Lineage Power Corporation |
AXA010A0X3Z | SIP Non-isolated Power Modules Programmable | Lineage Power Corporation |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |