|
|
PDF PS710EL-1A Data sheet ( Hoja de datos )
| Número de pieza | PS710EL-1A | |
| Descripción | 2.0 A CONTINUOUS LOAD CURRENT 1-ch Optical Coupled MOS FET | |
| Fabricantes | NEC | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de PS710EL-1A (archivo pdf) en la parte inferior de esta página. Total 14 Páginas | ||
|
No Preview Available !
www.DataSheet4U.com
DATA SHEET
Solid State Relay
OCMOS FET
PS710E-1A,PS710EL-1A
6-PIN DIP, 0.08 Ω LOW ON-STATE RESISTANCE
2.0 A CONTINUOUS LOAD CURRENT
1-ch Optical Coupled MOS FET
−NEPOC Series−
DESCRIPTION
The PS710E-1A and PS710EL-1A are solid state relays containing a GaAs LED on the input side and MOS FETs
on the output side.
It is suitable for PLC, etc. because of its large continuous load current and low on-state resistance.
The PS710EL-1A has a surface mount type lead.
FEATURES
• Low on-state resistance (Ron = 0.08 Ω TYP.)
• Large continuous load current (IL = 2.0 A)
• 1 channel type (1 a output)
• Low LED operating current (IF = 2 mA)
• Designed for AC/DC switching line changer
• Small package (6-pin DIP)
• Low offset voltage
• Ordering number of taping product: PS710EL-1A-E3, E4: 1 000 pcs/reel
<R> • Pb-Free product
<R> • Safety standards
• UL approved: File No. E72422
APPLICATIONS
• Measurement equipment
• FA equipment
The information in this document is subject to change without notice. Before using this document, please
confirm that this is the latest version.
Not all products and/or types are available in every country. Please check with an NEC Electronics
sales representative for availability and additional information.
Document No. PN10127EJ02V0DS (2nd edition)
Date Published July 2006 NS CP(K)
Printed in Japan
The mark <R> shows major revised points.
The revised points can be easily searched by copying an "<R>" in the PDF file and specifying it in the "Find what:" field.
2002, 2006
1 page  
www.DataSheet4U.com
PS710E-1A,PS710EL-1A
ABSOLUTE MAXIMUM RATINGS (TA = 25°C, unless otherwise specified)
Parameter
Symbol
Diode
Forward Current (DC)
IF
Reverse Voltage
VR
Power Dissipation
Peak Forward Current*1
PD
IFP
MOS FET Load Voltage
VL
Continuous
Load Current*2
Connection A
Connection B
IL
Connection C
Pulse Load Current*3
(AC/DC Connection)
ILP
Power Dissipation
Isolation Voltage*4
PD
BV
Total Power Dissipation
PT
Operating Ambient Temperature
TA
Storage Temperature
Tstg
Ratings
50
5.0
50
1
80
2.0
3.0
4.0
4.0
600
1 500
650
−40 to +85
−40 to +100
Unit
mA
V
mW
A
V
A
A
mW
Vr.m.s.
mW
°C
°C
*1 PW = 100 µs, Duty Cycle = 1%
*2 Conditions: IF ≥ 2 mA. The following types of load connections are available.
Connection A
1
2
3
Connection B
1
2
3
1
2
3
1
Connection C 2
3
6
5
IL
4
6
5 IL
4
6
5 IL
4
6 IL
5
4 IL
L
L
L
L
IL + IL
VL (AC/DC)
+
– VL (DC)
–
+ VL (DC)
+
– VL (DC)
*3 PW = 100 ms, 1 shot
*4 AC voltage for 1 minute at TA = 25°C, RH = 60% between input and output
Pins 1-3 shorted together, 4-6 shorted together.
Data Sheet PN10127EJ02V0DS
5
5 Page 
www.DataSheet4U.com
PS710E-1A,PS710EL-1A
RECOMMENDED SOLDERING CONDITIONS
(1) Infrared reflow soldering
• Peak reflow temperature
260°C or below (package surface temperature)
• Time of peak reflow temperature
10 seconds or less
• Time of temperature higher than 220°C
60 seconds or less
• Time to preheat temperature from 120 to 180°C 120±30 s
• Number of reflows
Three
• Flux
Rosin flux containing small amount of chlorine (The flux with a
maximum chlorine content of 0.2 Wt% is recommended.)
Recommended Temperature Profile of Infrared Reflow
180˚C
120˚C
120±30 s
(preheating)
(heating)
to 10 s
to 60 s
260˚C MAX.
220˚C
Time (s)
(2) Wave soldering
• Temperature
• Time
• Preheating conditions
• Number of times
• Flux
260°C or below (molten solder temperature)
10 seconds or less
120°C or below (package surface temperature)
One
Rosin flux containing small amount of chlorine (The flux with a maximum chlorine
content of 0.2 Wt% is recommended.)
<R> (3) Soldering by soldering iron
• Peak temperature (lead part temperature) 350°C or below
• Time (each pins)
3 seconds or less
• Flux
Rosin flux containing small amount of chlorine (The flux with a
maximum chlorine content of 0.2 Wt% is recommended.)
(a) Soldering of leads should be made at the point 1.5 to 2.0 mm from the root of the lead.
(b) Please be sure that the temperature of the package would not be heated over 100°C.
(4) Cautions
• Fluxes
Avoid removing the residual flux with freon-based and chlorine-based cleaning solvent.
Data Sheet PN10127EJ02V0DS
11
11 Page | ||
| Páginas | Total 14 Páginas | |
| PDF Descargar | [ Datasheet PS710EL-1A.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| PS710EL-1A | 2.0 A CONTINUOUS LOAD CURRENT 1-ch Optical Coupled MOS FET | NEC |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |