|
|
PDF 2SC4336 Data sheet ( Hoja de datos )
| Número de pieza | 2SC4336 | |
| Descripción | NPN Silicon Transistor | |
| Fabricantes | NEC | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de 2SC4336 (archivo pdf) en la parte inferior de esta página. Total 5 Páginas | ||
|
No Preview Available !
DATA SHEET
SILICON POWER TRANSISTOR
2SC4336
NPN SILICON EPITAXIAL TRANSISTOR
FOR HIGH-SPEED SWITCHING
DESCRIPTION
The 2SC4336 is a mold power transistor developed for high-
speed switching and features a very low collector-to-emitter
www.DataSheet4U.com
saturation. This transistor is ideal for use in switching power
supplies, DC/DC converters, motor drivers, solenoid drivers, and
other low-voltage power supply devices, as well as for high-current
switching.
FEATURES
• Mold package that does not require an insulating board or
insulation bushing
• Fast switching speed
• Low collector-to-emitter saturation voltage
VCE(sat) ≤ 0.3 V MAX. (IC = 6.0 A)
ORDERING INFORMATION
PART NUMBER
PACKAGE
2SC4336
Isolated TO-220 (MP-45)
PACKAGE DRAWING (Unit: mm)
10.5 MAX.
7 ±0.2 φ 3.2 ±0.2
4.7 MAX.
3.0 MAX.
0.8 ±0.1
2.54 TYP.
1.3 ±0.2 0.5 ±0.1
1.5 ±0.2
2.54 TYP.
2.5 ±0.1
123
1: Base
2: Collector
3: Emitter
ABSOLUTE MAXIMUM RATINGS (TA = 25°C)
Collector to base voltage
VCBO
100
Collector to emitter voltage
VCEO
100
Emitter to base voltage
VEBO
7.0
Collector current (DC)
Collector current (pulse) Note
IC(DC)
IC(pulse)
10
20
Base current (DC)
IB(DC)
6.0
Total power dissipation (TC = 25°C) PT 30
Total power dissipation (TA = 25°C) PT 2.0
Junction temperature
Tj 150
Storage temperature
Tstg −55 to +150
V
V
V
A
A
A
W
W
°C
°C
Note PW ≤ 300 µs, Duty Cycle ≤ 10%
The information in this document is subject to change without notice. Before using this document, please
confirm that this is the latest version.
Not all products and/or types are available in every country. Please check with an NEC Electronics
sales representative for availability and additional information.
Document No. D17261EJ1V0DS00 (1st edition)
Date Published July 2004 NS CP(K)
Printed in Japan
2004
1 page  
2SC4336
• The information in this document is current as of July, 2004. The information is subject to change
without notice. For actual design-in, refer to the latest publications of NEC Electronics data sheets or
www.DataSheet4U.com data books, etc., for the most up-to-date specifications of NEC Electronics products. Not all
products and/or types are available in every country. Please check with an NEC Electronics sales
representative for availability and additional information.
• No part of this document may be copied or reproduced in any form or by any means without the prior
written consent of NEC Electronics. NEC Electronics assumes no responsibility for any errors that may
appear in this document.
• NEC Electronics does not assume any liability for infringement of patents, copyrights or other intellectual
property rights of third parties by or arising from the use of NEC Electronics products listed in this document
or any other liability arising from the use of such products. No license, express, implied or otherwise, is
granted under any patents, copyrights or other intellectual property rights of NEC Electronics or others.
• Descriptions of circuits, software and other related information in this document are provided for illustrative
purposes in semiconductor product operation and application examples. The incorporation of these
circuits, software and information in the design of a customer's equipment shall be done under the full
responsibility of the customer. NEC Electronics assumes no responsibility for any losses incurred by
customers or third parties arising from the use of these circuits, software and information.
• While NEC Electronics endeavors to enhance the quality, reliability and safety of NEC Electronics products,
customers agree and acknowledge that the possibility of defects thereof cannot be eliminated entirely. To
minimize risks of damage to property or injury (including death) to persons arising from defects in NEC
Electronics products, customers must incorporate sufficient safety measures in their design, such as
redundancy, fire-containment and anti-failure features.
• NEC Electronics products are classified into the following three quality grades: "Standard", "Special" and
"Specific".
The "Specific" quality grade applies only to NEC Electronics products developed based on a customer-
designated "quality assurance program" for a specific application. The recommended applications of an NEC
Electronics product depend on its quality grade, as indicated below. Customers must check the quality grade of
each NEC Electronics product before using it in a particular application.
"Standard": Computers, office equipment, communications equipment, test and measurement equipment, audio
and visual equipment, home electronic appliances, machine tools, personal electronic equipment
and industrial robots.
"Special": Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster
systems, anti-crime systems, safety equipment and medical equipment (not specifically designed
for life support).
"Specific": Aircraft, aerospace equipment, submersible repeaters, nuclear reactor control systems, life
support systems and medical equipment for life support, etc.
The quality grade of NEC Electronics products is "Standard" unless otherwise expressly specified in NEC
Electronics data sheets or data books, etc. If customers wish to use NEC Electronics products in applications
not intended by NEC Electronics, they must contact an NEC Electronics sales representative in advance to
determine NEC Electronics' willingness to support a given application.
(Note)
(1) "NEC Electronics" as used in this statement means NEC Electronics Corporation and also includes its
majority-owned subsidiaries.
(2) "NEC Electronics products" means any product developed or manufactured by or for NEC Electronics (as
defined above).
M8E 02. 11-1
5 Page | ||
| Páginas | Total 5 Páginas | |
| PDF Descargar | [ Datasheet 2SC4336.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| 2SC4330 | Silicon NPN Power Transistor |  Inchange Semiconductor |
| 2SC4331 | Silicon NPN Power Transistor | Inchange Semiconductor |
| 2SC4331 | Silicon Power Transistor | NEC |
| 2SC4331 | SILICON POWER TRANSISTOR |  Renesas |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |