|
|
Número de pieza | MVR32 | |
Descripción | Chip trimmer potentiometers | |
Fabricantes | ROHM Semiconductor | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de MVR32 (archivo pdf) en la parte inferior de esta página. Total 9 Páginas | ||
No Preview Available ! www.DataSheet4U.com
Resistors
Chip trimmer potentiometers
MVR32
MVR32
!Features
1) Superb solderability thanks to extra soldering electrode.
2) Close match between wiper and resistive element reduces wiper noise.
3) Mounting can be automated by using a carrier tape.
4) Extremely thin dimensions and light weight facilitate miniaturization of equipment.
5) Two-digit markings used to indicate resistance.
6) Special screwdriver (AD1804) available separately.
7) ROHM resistors have approved ISO-9001 certification. Design and specifications are subject to change without notice.
Carefully check the specification sheet before using or ordering it.
!Ratings
Item
Rated power
Rated voltage
Conditions
Power must be derated according to the power derating curve in
Figure 1 when ambient temperature exceeds 70˚C.
100
80
60
40
20
0
– 55
0 70 100 125
AMBIENT TEMPERATURE ( ˚C)
Fig.1
The voltage rating is calculated by the following equation. If the value
obtained exceeds the maximum operating voltage, the voltage rating
is equal to the maximum operating voltage.
E= P×R
E : Rated voltage (V)
P : Rated power (W)
R : Nominal resistance (Ω)
Nominal total
resistance range
Total
resistance tolerance
Resistance
variation
Effective rotation angle
Operating temperature
Reactive variable
range
Rotational angle, both ends
Specifications
0.1W (1 / 10W) / element
at 70˚C
Max. operating voltage : 50V
100 ∼ 1MΩ
(recommended resistance value : E3 series)
(applicable resistance value : E3 series)
±25%
B (linear) characteristics
250±20˚
−55˚C ∼ +125˚C
within 10% (R>150Ω)
within 20% (R≤150Ω)
•Before using components in circuits where they will be exposed to transients such as pulse loads (short-duration, high-level loads), be certain to evaluate the
component in the mounted state. In addition, the reliability and performance of this component cannot be guaranteed if it is used with a steady state voltage that
is greater than its rated voltage.
•The remainder of flux may negatively affect product performance and reliability. So please make sure to wash and remove flux completely washing.
1 page Resistors
!Recommended screwdriver for adjusting MVR resistors
Model
Dimensions, configuration
Open, type 3
MVR
Manual adjustment
Automatic adjustment
1.8
0.4
R1.2
0.3
R4.0
Commercially sold product AD1804 [Rohm] (see note)
[Maker]
No.9000 (−) 1.8×30 [Vessel]
Note : Screwdriver specified by ROHM for adjustment of MVR chips (MVR32).
φ2
−
MVR32
Product name
Tip size
AD1804
1.8×0.4
Sold in units of 20. Protective cap included.
Tip material
Zirconia
[AD1804]
(Units : mm)
0.4
15
4.5
80
Main body material
ABS resin
5 Page |
Páginas | Total 9 Páginas | |
PDF Descargar | [ Datasheet MVR32.PDF ] |
Número de pieza | Descripción | Fabricantes |
MVR32 | Chip trimmer potentiometers | ROHM Semiconductor |
MVR32D102K | Metal Oxide Varistors | MERITEK |
MVR32D112K | Metal Oxide Varistors | MERITEK |
MVR32D122K | Metal Oxide Varistors | MERITEK |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |