|
|
PDF SY89229U Data sheet ( Hoja de datos )
| Número de pieza | SY89229U | |
| Descripción | Clock Divider | |
| Fabricantes | Micrel Semiconductor | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de SY89229U (archivo pdf) en la parte inferior de esta página. Total 16 Páginas | ||
|
No Preview Available !
www.DataSheet4U.com
SY89229U
1GHz Precision, LVDS ÷3, ÷5 Clock Divider
with Fail Safe Input and Internal Termination
General Description
The SY89229U is a precision, low jitter 1GHz ÷3, ÷5
clock divider with an LVDS output. A unique Fail-
Safe Input (FSI) protection prevents metastable
output conditions when the input clock voltage swing
drops significantly below 100mV or input is removed.
The differential input includes Micrel’s unique, 3-pin
internal termination architecture that allows the input
to interface to any differential signal (AC- or DC-
coupled) as small as 100mV (200mVPP) without any
level shifting or termination resistor networks in the
signal path. The outputs are 325mV, 100K-
compatible LVDS with fast rise/fall times guaranteed
to be less than 220ps.
The SY89229U operates from a 2.5V ±5% supply
and is guaranteed over the full industrial
temperature range of –40°C to +85°C. The
SY89229U is part of Micrel’s high-speed, Precision
Edge® product line.
All support documentation can be found on Micrel’s
web site at: www.micrel.com.
Block Diagram
Features
Precision Edge®
• Accepts a high-speed input and provides a precision
÷3 and ÷5 sub-rate, LVDS output
• Fail-Safe Input
– Prevents oscillations when input is invalid
• Guaranteed AC performance over temperature and
supply voltage:
– DC-to >1.0GHz throughput
– <1500ps Propagation Delay (In-to-Q)
– <220ps Rise/Fall times
• Ultra-low jitter design:
– <1psRMS random jitter
– <1psRMS cycle-to-cycle jitter
– <10psPP total jitter (clock)
– <0.7psRMS MUX crosstalk induced jitter
• Unique patented internal termination and VT pin
accepts DC- and AC-coupled inputs (CML, PECL,
LVDS)
• Wide input voltage range VCC to GND
• 325mV LVDS output
• 46% to 54% Duty Cycle(÷ 3)
• 47% to 53% Duty Cycle(÷ 5)
• 2.5V ±5% supply voltage
• -40°C to +85°C industrial temperature range
• Available in 16-pin (3mm x 3mm) MLF® package
Applications
• Fail-safe clock protection
Markets
• LAN/WAN
• Enterprise servers
• ATE
• Test and measurement
Precision Edge is a registered trademark of Micrel, Inc.
MLF and MicroLeadFrame are registered trademarks of Amkor Technology.
Micrel Inc. • 2180 Fortune Drive • San Jose, CA 95131 • USA • tel +1 (408) 944-0800 • fax + 1 (408) 474-1000 • http://www.micrel.com
August 2007
M9999-080707-A
[email protected] or (408) 955-1690
1 page  
Micrel, Inc.
SY89229U
LVDS Outputs DC Electrical Characteristics(7)
VCC = +2.5V ±5%, RL = 100Ω across the outputs; TA = –40°C to +85°C, unless otherwise stated.
Symbol Parameter
Condition
Min Typ Max
VOUT
Output Voltage Swing
(Q, /Q)
See Figure 2a
250 325
VDIFF_OUT Differential Output Voltage Swing
|Q – /Q|
See Figure 2b
500 650
VOCM
Output Common Mode Voltage
(Q, /Q)
See Figure 5a
1.125 1.20 1.275
∆VOCM
Change in Common Mode Voltage See Figure 5b
(Q, /Q)
–50
+50
Units
mV
mV
V
mV
LVTTL/CMOS DC Electrical Characteristics(7)
VCC = 2.5V ±5%; TA = –40°C to + 85°C, unless otherwise stated.
Symbol Parameter
Condition
Min Typ Max
VIH Input HIGH Voltage
VIL Input LOW Voltage
IIH Input HIGH Current
IIL Input LOW Current
2.0
-125
-300
0.8
30
Note:
7. The circuit is designed to meet the DC specifications shown in the above table after thermal equilibrium has been established.
Units
V
V
µA
µA
August 2007
5 M9999-080707-A
[email protected] or (408) 955-1690
5 Page 
Micrel, Inc.
SY89229U
Typical Operating Characteristics
VCC = 2.5V, GND = 0V, VIN = 200mV, tr / tf ≤ 300ps, RL = 100 across the outputs; TA = 25°C, unless otherwise stated.
August 2007
11 M9999-080707-A
[email protected] or (408) 955-1690
11 Page | ||
| Páginas | Total 16 Páginas | |
| PDF Descargar | [ Datasheet SY89229U.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| SY89229U | Clock Divider | Micrel Semiconductor |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |