|
|
PDF CMQ1332-QH Data sheet ( Hoja de datos )
| Número de pieza | CMQ1332-QH | |
| Descripción | QFN Plastic Packaged Power Amplifier | |
| Fabricantes | Mimix Broadband | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de CMQ1332-QH (archivo pdf) en la parte inferior de esta página. Total 5 Páginas | ||
|
No Preview Available !
12.5-14.5 GHz
1.5W QFN Plastic Packaged Power Amplifier
September 2006 - Rev 17-Sep-06
CMQ1332-QH
Features
32 dBm (Typ) Saturated Output Power
33 dB (Typ) Linear Gain
ESD Protection On Die
Unconditionally Stable
Low Cost, Surfae Mount Package
4x4x1.4 mm
RoHS Compliant
7V, 770mA
Applications
Ku-Band VSAT Transmit Subsystems
General Description
The CMQ1332-QH is a pHEMT power amplifier packaged in a 4X4
QFN plastic package. The CMQ1332-QH is self contained with 50
ohm input and output terminals. The PAM is unconditionally
stable and the internal matching allows for a reduction in external
components making this product a simple and low cost solution.
RoHS compliance and on-chip ESD protection make it an ideal
solution in all manufacturing environments.The power amplifier is
intended for use as the final RF amplifier in the extended Ku-Band
www.DataSheet4U.comsatellite applications.
Absolute Maximum Ratings
Drain Voltage (+Vdd)
+8 V
Gate Voltage (Vgg)
-3 V
Quiescent Current (Idq)
1000 mA
Gate Current (Ig)
5 mA
RF Input Power (Pin)
+11 dBm
Dissipated Power (Piss)
8W
Storage Temperature
-50 ºC to +150 ºC
Operating Backside Temperature -40 ºC to +80 ºC
Electrical Characteristics (T = +25ºC,Vd = 7V, Id = 770mA)
Parameter
Units Min. Typ. Max.
Operating Frequency (F)
GHz 12.5
14.5
Drain Current (At Saturation) (Id)
mA 770
Drain Voltage (Vd)
Volts
6
7 7.5
Gate Voltage (RF ON) (Vg)
Volts
-2
- -0.2
Linear Gain (S21)
dB 33
Input Reflection Coefficient (S11)
dB -11
Output Reflection Coefficient (S22)
dB -8
Noise Figure (NF)
dB 9
Saturated Output Power (Psat)
dBm 31.0
32
Power @ 1dB Compression Gain (P1dB)
dBm 29
Power Added Efficiency (At Saturation) (PAE)
%
27
Gate Current (Igs)
mA - 0.5 5
Electrical Specifications (TA = -25C to 80C) Operation outside these limits can cause permanent damage.
Parameter
Condition
Units Min
Typ Max
Saturated Output Power Variation from room temperature
Linear Gain
Variation from room temperature
Stability
dB
dB
-0.7
-2.5 2.5
Unconditional Stable
Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099
Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Page 1 of 5
Characteristic Data and Specifications are subject to change without notice. ©2006 Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.
1 page  
12.5-14.5 GHz
1.5W QFN Plastic Packaged Power Amplifier
September 2006 - Rev 17-Sep-06
CMQ1332-QH
Handling and Assembly Information
CAUTION! - Mimix Broadband MMIC Products contain gallium arsenide (GaAs) which can be hazardous to the human
body and the environment. For safety, observe the following procedures:
Do not ingest.
Do not alter the form of this product into a gas, powder, or liquid through burning, crushing, or chemical
processing as these by-products are dangerous to the human body if inhaled, ingested, or swallowed.
Observe government laws and company regulations when discarding this product.This product must be
discarded in accordance with methods specified by applicable hazardous waste procedures.
Life Support Policy - Mimix Broadband's products are not authorized for use as critical components in life support
devices or systems without the express written approval of the President and General Counsel of Mimix Broadband. As
used herein: (1) Life support devices or systems are devices or systems which, (a) are intended for surgical implant into
the body, or (b) support or sustain life, and whose failure to perform when properly used in accordance with instructions
for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. (2) A critical
component is any component of a life support device or system whose failure to perform can be reasonably expected
to cause the failure of the life support device or system, or to affect its safety or effectiveness.
Package Attachment - This packaged product from Mimix Broadband is provided as a rugged surface mount package
compatible with high volume solder installation. Care should be taken not to apply heavy pressure to the top or base
material to avoid package damage. Vacuum tools or other suitable pick and place equipment may be used to pick and
place this part. Care should be taken to ensure that there are no voids or gaps in the solder connection so that good RF,
DC and ground connections are maintained. Voids or gaps can eventually lead not only to RF performance degradation,
but reduced reliability and life of the product due to thermal stress.
Mimix Lead-Free RoHS Compliant Program - Mimix has an active program in place to meet customer and governmental
requirements for eliminating lead (Pb) and other environmentally hazardous materials from our products. All Mimix
RoHS compliant components are form, fit and functional replacements for their non-RoHS equivalents. Lead plating of
our RoHS compliant parts is 100% matt tin (Sn) over copper alloy and is backwards compatible with current standard
SnPb low-temperature reflow processes as well as higher temperature (260°C reflow) “Pb Free” processes.
Ordering Information
Part Number for Ordering
Description
CMQ1332-QH-0G00
Matte Tin plated RoHS compliant QFN4X4 24L surface mount package in bulk quantity
CMQ1332-QH-0G0T
Matte Tin plated RoHS compliant QFN4X4 24L Surface mount package in tape and reel
PB-CMQ1332-QH-0000
CMQ1332-QH Evaluation Board
We also offer this part with SnPb (Tin-Lead) or NiPdAu plating. Please contact your regional sales manager for more
information regarding different plating types.
Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099
Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Page 5 of 5
Characteristic Data and Specifications are subject to change without notice. ©2006 Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.
5 Page | ||
| Páginas | Total 5 Páginas | |
| PDF Descargar | [ Datasheet CMQ1332-QH.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| CMQ1332-QH | QFN Plastic Packaged Power Amplifier | Mimix Broadband |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |