|
|
PDF MAX6769 Data sheet ( Hoja de datos )
| Número de pieza | MAX6769 | |
| Descripción | (MAX6765 - MAX6774) Automotive Micropower Linear Regulators | |
| Fabricantes | Maxim Integrated Products | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de MAX6769 (archivo pdf) en la parte inferior de esta página. Total 23 Páginas | ||
|
No Preview Available !
www.DataSheet4U.com
19-0657; Rev 0; 10/06
Automotive Micropower Linear Regulators
with Supervisor
General Description
The MAX6765–MAX6774 are low-quiescent-current, high-
voltage linear regulators that operate from 4V to 72V and
deliver up to 100mA of load current. These low-power
devices consume only 31µA of quiescent current, making
them ideal for always-on automotive modules. These
devices are offered with fixed standard output options of
5.0V, 3.3V, 2.5V, and 1.8V, or can be adjusted from 1.8V
to 11V with two external resistors.
The MAX6765–MAX6774 feature a push-pull or open-
drain, active-low RESET output with either fixed or
adjustable thresholds. Whenever the regulator’s output
falls below the reset threshold, the RESET output asserts
and remains asserted for at least the minimum reset
timeout period after the output voltage exceeds its
threshold. The minimum reset timeout period is offered
with fixed values from 75µs to 200ms or can be adjusted
externally with a small capacitor.
These devices provide three regulator enable modes to
accommodate several power-on schemes. The
MAX6765/MAX6766/MAX6769/MAX6770/MAX6773/
MAX6774 feature a single traditional enable input
(ENABLE) to turn on and off the regulator. The
MAX6771/MAX6772 provide dual enable inputs
(ENABLE1 and ENABLE2) to turn on and off the regulator
either through an ignition switch or a bus transceiver. The
MAX6767/MAX6768 provide a hold input (HOLD) in addi-
tion to the enable input to allow for the implementation of a
self-holding circuit without requiring external components.
Setting HOLD low after enabling the regulator forces the
regulator to remain on even if ENABLE is subsequently
set low. Releasing HOLD shuts down the regulator.
The MAX6773/MAX6774 also include a watchdog input
that monitors a pulse train from the microprocessor (µP)
and generates a reset pulse if the watchdog input
remains high or low for a duration longer than the 1.6s
(typ) watchdog timeout period.
The MAX6765–MAX6774 are available in a small, ther-
mally enhanced 3mm x 3mm TDFN package that can
dissipate up to 1.951W, thereby supporting continuous
regulator operation during high ambient temperatures,
high battery voltage, and high load-current conditions.
The MAX6765–MAX6774 are fully specified for a -40°C to
+125°C operating temperature range.
Applications
Automotive
Industrial
Telecom
Typical Application Circuit and Selector Guide appear at
end of data sheet.
Features
♦ Low 31µA Quiescent Current
♦ 4V to 72V Wide Input Voltage Range
♦ 100mA Output Current Capability
♦ Dropout Voltage of 620mV with 5V Output
at 100mA
♦ Fixed Output-Voltage Options: 5V, 3.3V, 2.5V,
and 1.8V
♦ Adjustable Output Voltages from 1.8V to 11V
♦ Open-Drain or Push-Pull RESET Output
♦ Fixed or Capacitor-Adjustable Reset Timeouts
♦ Small, Thermally Enhanced 1.9W, 3mm x 3mm
TDFN Package
♦ Overtemperature and Short-Circuit Protection
♦ Fully Specified from -40°C to +125°C
Ordering Information
PART
TEMP
RANGE
PIN-
PACKAGE
PKG
CODE
MAX6765TT_D_+* -40°C to +125°C 6 TDFN-EP** T633-2
MAX6766TT_D_+* -40°C to +125°C 6 TDFN-EP** T633-2
Ordering Information continued at end of data sheet.
The first “_” is a placeholder for the voltage output and reset
threshold. The 2nd “_” designates the fixed reset-timeout option.
See Tables 1 and 2 for details. For example, the MAX6765TTLD4
has a 5V output, a reset threshold of 4.65V, and a 200ms typical
reset timeout.
+Denotes lead-free package.
*Future product—contact factory for availability.
**EP = Exposed paddle.
For tape-and-reel orders add a “T” after the “+” symbol to com-
plete the part number. Tape-and-reel orders are available in
2.5k increments. Nonstandard versions require a 10k minimum
order quantity.
Pin Configurations
TOP VIEW
654
MAX6765
MAX6766
+
123
TDFN
Pin Configurations continued at end of data sheet.
________________________________________________________________ Maxim Integrated Products 1
For pricing, delivery, and ordering information, please contact Maxim/Dallas Direct! at
1-888-629-4642, or visit Maxim’s website at www.maxim-ic.com.
1 page  
www.DataSheet4U.com
Automotive Micropower Linear Regulators
with Supervisor
Typical Operating Characteristics
(VIN = 14V, COUT = 10µF, CIN = 0.1µF, TA = +25°C, unless otherwise noted.)
SUPPLY CURRENT vs. INPUT VOLTAGE
44
42 VOUT = 3.3V
LIMITED BY POWER
40 DISSIPATION
38 ILOAD = 100mA
36
34
32 ILOAD = 0
30
28
26
24
4
12 20 28 36 44 52 60 68
INPUT VOLTAGE (V)
SUPPLY CURRENT vs. TEMPERATURE
47
VOUT = 5V
45
43
41
39
ILOAD = 100mA
ILOAD = 50mA
37
35
ILOAD = 1mA
33
31
29 ILOAD = 0
27
-40 -25 -10 5 20 35 50 65 80 95 110 125
TEMPERATURE (°C)
SHUTDOWN SUPPLY CURRENT
vs. TEMPERATURE
5.0
4.5
4.0
3.5
3.0
2.5
2.0
1.5
1.0
-40 -25 -10 5 20 35 50 65 80 95 110 125
TEMPERATURE (°C)
6.0
5.5
5.0
4.5
4.0
3.5
3.0
2.5
2.0
1.5
1.0
0.5
0
4
SHUTDOWN SUPPLY CURRENT
vs. INPUT VOLTAGE
12 20 28 36 44 52 60 68
INPUT VOLTAGE (V)
NORMALIZED RESETIN THRESHOLD VOLTAGE
vs. TEMPERATURE
1.004
1.003
1.002
1.001
1.000
0.999
0.998
0.997
0.996
0.995
0.994
0.993
0.992
-40 -25 -10 5 20 35 50 65 80 95 110 125
TEMPERATURE (°C)
DROPOUT VOLTAGE
vs. LOAD CURRENT
600
550 VOUT = 5V
500
450
400
350
300
250
200
150
100
50
0
0 10 20 30 40 50 60 70 80 90 100
LOAD CURRENT (mA)
OUTPUT VOLTAGE
vs. LOAD CURRENT
5.20
VOUT = 5V
5.15
5.10
5.05
5.00
4.95
4.90
4.85
4.80
0 10 20 30 40 50 60 70 80 90 100
LOAD CURRENT (mA)
OUTPUT VOLTAGE
vs. LOAD CURRENT
3.34 VOUT = 3.3V
3.32
3.30
3.28
3.26
3.24
3.22
3.20
0 10 20 30 40 50 60 70 80 90 100
LOAD CURRENT (mA)
_______________________________________________________________________________________ 5
5 Page 
www.DataSheet4U.com
Automotive Micropower Linear Regulators
with Supervisor
Functional Diagrams (continued)
THERMAL
PROTECTION
MAX6767/MAX6768
IN OUT
OVERCURRENT
PROTECTION
ENABLE
HOLD
CONTROL
LOGIC
1.147V
1.233V OR
1.085V
116mV
RESET
TIMEOUT
SET
RESET
TIMEOUT
GND
______________________________________________________________________________________ 11
11 Page | ||
| Páginas | Total 23 Páginas | |
| PDF Descargar | [ Datasheet MAX6769.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| MAX676 | Precision Voltage References |  Maxim Integrated |
| MAX6760 | (MAX6754 - MAX6764) Single/dual-voltage Window Detectors | Maxim Integrated Products |
| MAX6761 | (MAX6754 - MAX6764) Single/dual-voltage Window Detectors | Maxim Integrated Products |
| MAX6761TALAD3 | Low-Power / Single/Dual-Voltage Window Detectors | Maxim Integrated |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |