|
|
PDF MAX1959 Data sheet ( Hoja de datos )
| Número de pieza | MAX1959 | |
| Descripción | (MAX1958 / MAX1959) W-CDMA/N-CDMA Cellular Phone HBT PA Management ICs | |
| Fabricantes | Maxim Integrated Products | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de MAX1959 (archivo pdf) en la parte inferior de esta página. Total 24 Páginas | ||
|
No Preview Available !
www.DataSheet4U.com
19-2659; Rev 0; 10/02
W-CDMA/N-CDMAEVAALVUAAILTAIOBNLEKIT Cellular Phone HBT PA
Management ICs
General Description
The MAX1958/MAX1959 power amplifier (PA) power-
management ICs (PMICs) integrate an 800mA, dynami-
cally adjustable step-down converter, a 5mA Rail-to-
Rail® operational amplifier (op amp), and a precision
temperature sensor to power a heterojunction bipolar
transistor (HBT) PA in W-CDMA and N-CDMA cell
phones.
The high-efficiency, pulse-width modulated (PWM), DC-
to-DC buck converter is optimized to provide a guaran-
teed output current of 800mA. The output voltage is
dynamically controlled to produce any fixed-output volt-
age in the range of 0.75V to 3.4V (MAX1958) or 1V to
3.6V (MAX1959), with settling time less than 30µs for a
full-scale change in voltage and current. The 1MHz PWM
switching frequency allows the use of small external
components while pulse-skip mode reduces quiescent
current to 190µA with light loads. The converter utilizes a
low on-resistance internal MOSFET switch and synchro-
nous rectifier to maximize efficiency and minimize
external component count. The 100% duty-cycle opera-
tion allows for an IC dropout voltage of only 130mV (typ)
at 600mA load.
The micropower op amp is used to provide bias to the
HBT PA to maximize efficiency. The amplifier features
active discharge in shutdown for full PA bias control. It
has 5mA rail-to-rail drive capability, 800kHz gain-band-
width product, and 120dB open-loop voltage gain.
The precision temperature sensor measures tempera-
tures between -40°C to +125°C, with linear tempera-
ture-to-voltage analog output characteristics.
The MAX1958/MAX1959 are available in a 20-pin 5mm ✕
5mm thin QFN package (0.8mm max height).
Features
o Step-Down Converter
Dynamically Adjustable Output Voltage from
0.75V to 3.4V (MAX1958)
Dynamically Adjustable Output Voltage from
1V to 3.6V (MAX1959)
800mA Guaranteed Output Current
130mV IC Dropout at 600mA Load
Low Quiescent Current
190µA (typ) in Skip Mode (MAX1958)
3mA (typ) in PWM Mode
0.1µA (typ) in Shutdown Mode
1MHz Fixed-Frequency PWM operation
16% to 100% Duty-Cycle Operation
No External Schottky Diode Required
Soft-Start
o Operational Amplifier
5mA Rail-to-Rail Output
Active Discharge in Shutdown
800kHz Gain-Bandwidth Product
120dB Open-Loop Voltage Gain (RL = 100kΩ)
o Temperature Sensor
Accurate Sensor -11.7mV/°C Slope
-40°C to +125°C-Rated Temperature Range
o 20-Pin Thin QFN (5mm ✕ 5mm), 0.8mm Height (max)
Ordering Information
PART
TEMP RANGE
MAX1958ETP
-40°C to +85°C
MAX1959ETP
-40°C to +85°C
*EP = Exposed paddle.
PIN-PACKAGE
20 Thin QFN-EP*
20 Thin QFN-EP
Pin Configuration
Applications
W-CDMA and N-CDMA Cellular Phones
Wireless PDAs and Modems
Typical Operating Circuit and Functional Diagram appear at
end of data sheet.
TOP VIEW
AOUT
SHDN2
AGND
TOUT
REF
1
2
3
4
5
MAX1958/
MAX1959
15 PWM
14 INP
13 IN
12 LX
11 PGND
Rail-to-Rail is a registered trademark of Nippon Motorola, Ltd.
THIN QFN
5mm x 5mm
________________________________________________________________ Maxim Integrated Products 1
For pricing, delivery, and ordering information, please contact Maxim/Dallas Direct! at
1-888-629-4642, or visit Maxim’s website at www.maxim-ic.com.
DataSheet4 U .com
1 page  
www.DataSheet4U.com
W-CDMA/N-CDMA Cellular Phone HBT PA
Management ICs
ELECTRICAL CHARACTERISTICS (OP AMP) (continued)
(VINP = VIN = VVCC = V SHDN2 = 2.7V, VAOUT = VVCC/2, RL = ∞ connected from AOUT to VVCC/2, VPGND = VAGND = V SHDN1 =
V SHDN3 = VPWM = VADJ = 0, OUT = LX = TOUT = REF = COMP = unconnected, VCM = 0, TA = 0°C to +85°C, unless otherwise
noted. Typical values are at TA = +25°C.)
PARAMETER
Power-On Time
Input Capacitance
CONDITIONS
MIN TYP MAX UNITS
4 µs
2.5 pF
Total Harmonic Distortion
Settling Time to 0.01%
Active Discharge Output
Impedance
f =10kHz, VAOUT = 2VP-P, AVCL =1, VVCC = 5V,
RAOUT = 100kΩ to VVCC/2
∆VAOUT = 4V step, VVCC = 5V, AVCL = 1
V SHDN2 = 0, IAOUT = 1mA
0.01
10
100
500
%
µs
Ω
ELECTRICAL CHARACTERISTICS (TEMPERATURE SENSOR)
(VINP = VIN = VVCC = V SHDN3 = 2.7V, VAGND = VPGND = VPWM = V SHDN1 = V SHDN2 = VADJ = 0, IN- = IN+ = AOUT = COMP = LX =
OUT = REF = unconnected, CTOUT = 0.01µF (min), TA = 0°C to +85°C, unless otherwise noted. Typical values are at TA = +25°C.)
PARAMETER
Temperature Sensor Error
(Note 3)
Output Voltage at +27°C
Sensor Gain (Note 4)
Nonlinearity
Load Regulation
Line Regulation
Quiescent Current
SHDN3 Logic High Voltage
SHDN3 Logic Low Voltage
SHDN3 Current
CONDITIONS
TA = 0°C (Note 2)
TA = +25°C (Note 2)
TA = +85°C
0 ≤ ILOAD ≤ 15µA
2.6V ≤ VVCC ≤ 5.5V
2.6V ≤ VVCC ≤ 5.5V
2.6V < VVCC < 5.5V
2.6V < VVCC < 5.5V
VVCC = 5.5V
MIN TYP MAX UNITS
-3.5 +3.5
-2.5
+2.5
°C
-2.5 +2.5
1.56 V
-11.64
mV/°C
±0.4 %
-5 mV
-2.3 mV/V
10 18
µA
1.6 V
0.6 V
0.1 1.0
µA
_______________________________________________________________________________________ 5
DataSheet4 U .com
5 Page 
www.DataSheet4U.com
W-CDMA/N-CDMA Cellular Phone HBT PA
Management ICs
(TA = +25°C, unless otherwise noted.)
Typical Operating Characteristics (continued)
ENTERING AND EXITING SHUTDOWN
MAX1958/59 toc11
VSHDN
5V/div
IIN
50mA/div
VOUT 1V/div
400µs/div
MAX1958 ADJ TRANSIENT
MAX1958/59 toc12
3.4V
VOUT
0.75V
1.932V
VADJ 0.426V
10µs/div
VOUT
AC-COUPLED
LOAD TRANSIENT
PWM = AGND
MAX1958/59 toc13
100mV/div
VOUT
AC-COUPLED
LOAD TRANSIENT
PWM = IN
MAX1958/59 toc14
100mV/div
400mA
400mA
IOUT
30mA
IOUT
30mA
COUT = 10µF
COUT = 10µF
100µs/div
100µs/div
VOUT
AC-COUPLED
VIN
LOAD TRANSIENT
MAX1958/59 toc15
10mV/div
4V
3V
OP AMP SUPPLY CURRENT
vs. INPUT VOLTAGE
500
450 TA = +125°C
400 TA = +85°C
350 TA = +25°C
300
TA = -40°C
250
1ms/div
200
2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5
VCC (V)
______________________________________________________________________________________ 11
DataSheet4 U .com
11 Page | ||
| Páginas | Total 24 Páginas | |
| PDF Descargar | [ Datasheet MAX1959.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| MAX195 | 16-Bit / 85ksps ADC with 10A Shutdown |  Maxim Integrated |
| MAX1951 | PLASTIC ENCAPSULATED DEVICES | Maxim Integrated |
| MAX1951A | PWM DC-DC Step-Down Regulator | Maxim Integrated Products |
| MAX1951ESA | PLASTIC ENCAPSULATED DEVICES | Maxim Integrated |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |