DataSheet.es    


PDF MDT10P56 Data sheet ( Hoja de datos )

Número de pieza MDT10P56
Descripción MICROCONTROLLER
Fabricantes Micon Design Technology 
Logotipo Micon Design Technology Logotipo



Hay una vista previa y un enlace de descarga de MDT10P56 (archivo pdf) en la parte inferior de esta página.


Total 11 Páginas

No Preview Available ! MDT10P56 Hoja de datos, Descripción, Manual

.com1. General Description
t4UThis EPROM-Based 8-bit micro-controller uses a fully
eestatic CMOS technology process to achieve higher
Shspeed and smaller size with the low power
taconsump-tion and high noise immunity. On chip
.Damemory inclu-des 1K words of ROM, and 72 bytes of
wwwstatic RAM.
MDT10P56
u Power-on Reset
u Sleep Mode for power saving
u 5 types of oscillator can be selected by
programming option:
INTRC Internal 4 MHz RC oscillator
RC Low cost RC oscillator
LFXT Low frequency crystal oscillator
XTAL Standard crystal oscillator
HFXT High frequency crystal oscillator
2. Features
The followings are some of the features on the
mhardware and software :
ou Fully CMOS static design
.cu 8-bit data bus
u On chip EPROM size : 1K words
Uu Internal RAM size : 72 bytes
t4u 36 single word instructions
u 14-bit instructions
eu 2-level stacks
eu Operating voltage : 2.5 V ~ 5.5V
hu Operating frequency : 0 ~ 20 MHz
Su The most fast execution time is 200 ns under
ta20 MHz in all single cycle instructions except
the branch instruction
au Addressing modes include direct, indirect and
www.Drelative addressing modes
u 3 oscillator start-up time can be selected by
programming option:
20 ms, 40 ms, 80 ms
u 8-bit real time clock/counter(RTCC) with 8-bit
programmable prescaler
u On-chip RC oscillator based Watchdog
Timer(WDT)
u Wake-up from sleep on pin change
3. Applications
The application areas of this MDT10P56 range from
appliance motor control and high speed automotive
to low power remote transmitters/receivers, small
instruments, chargers, toy, automobile and PC
peripheral … etc.
w.DataSheet4U.comThis specification are subject to be changed without notice. Any latest information please preview
wwhttp;//www.mdtic.com.tw
P. 1
2004/1 Ver. 1.2

1 page




MDT10P56 pdf
MDT10P56
Bit Symbol
Function
Prescaler Value
RTCC rate
5 TCS
6 PBPHB
7 PBWUB
RTCC signal set :
0 Internal instruction cycle clock
1 Transition on RTCC pin
PortB pull-high :
0 Enable
1 Disable
PortB wake-up :
0 Enable
1 Disable
(8) CPIO B (Control Port I/O Mode Register)
The CPIO register is “write-only”
“0”, I/O pin in output mode;
“1”, I/O pin in input mode.
(9) CPIO C (Control Port I/O Mode Register)
The CPIO register is “write-only”
“0”, I/O pin in output mode;
“1”, I/O pin in input mode.
(10) Configurable options for EPROM (Set by writer) :
Oscillator Type
Oscillator Start-up Time
INTRC Oscillator
20ms,40ms,80ms
RC Oscillator
20ms,40ms,80ms
HFXT Oscillator
20ms,40ms,80ms
XTAL Oscillator
20ms,40ms,80ms
LFXT Oscillator
20ms,40ms,80ms
WDT rate
Watchdog Timer control
Watchdog timer disable all the time
Watchdog timer enable all the time
Security state
Security weak Disable
Security Disable
Security Enable
The default security state of EPROM is weak disable. Once the IC was set to
enable or disable, it’s forbidden to change.
This specification are subject to be changed without notice. Any latest information please preview
http;//www.mdtic.com.tw
P. 5
2004/1 Ver. 1.2

5 Page





MDT10P56 arduino
Time
2.5V
25ms
3.0V
23ms
4.0V
20ms
5.0V
19ms
6.3V
18ms
These parameters are for reference only.
6.
(1)INT_RC,WDT – disable
IC1: 4M
3.0V
900uA
4.0V
1.5mA
5.0V
2.1mA
These parameters are for reference only.
Sleep
1.0uA
1.0uA
1.0uA
MDT10P56
(2)INT_RC,WDT – enable
IC1: 4M
3.0V
900uA
4.0V
1.5mA
5.0V
2.1mA
These parameters are for reference only.
Sleep
5uA
15uA
30uA
7. Min Operation Voltage :
C =>
10p
XT, 20M
2.4V
HF, 20M
2.5V
These parameters are for reference only.
20p
2.4V
2.6V
30p
2.6V
3.0V
RC, 1k, no cap.
2.2V
These parameters are for reference only.
C =>
0p
LF, 1M
2.8V
These parameters are for reference only.
10p
3.2V
20p
3.4V
8. MCLR filter time :
Vdd=5V
time 2us
These parameters are for reference only.
This specification are subject to be changed without notice. Any latest information please preview
http;//www.mdtic.com.tw
P. 11
2004/1 Ver. 1.2

11 Page







PáginasTotal 11 Páginas
PDF Descargar[ Datasheet MDT10P56.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
MDT10P538-bit micro-controllerETC
ETC
MDT10P55MicrocontrollerMCU SENSOR
MCU SENSOR
MDT10P55AMICROCONTROLLERMicon Design Technology
Micon Design Technology
MDT10P55BMICROCONTROLLERMicon Design Technology
Micon Design Technology

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar