DataSheet.es    


PDF LM4841MH Data sheet ( Hoja de datos )

Número de pieza LM4841MH
Descripción Stereo 2W Amplifiers with DC Volume Control/ Transient Free Outputs/ and Cap-less Headphone Drive
Fabricantes National Semiconductor 
Logotipo National Semiconductor Logotipo



Hay una vista previa y un enlace de descarga de LM4841MH (archivo pdf) en la parte inferior de esta página.


Total 30 Páginas

No Preview Available ! LM4841MH Hoja de datos, Descripción, Manual

August 2002
LM4841
Stereo 2W Amplifiers with DC Volume Control,
Transient Free Outputs, and Cap-less Headphone Drive
General Description
The LM4841 is a monolithic integrated circuit that provides
DC volume control and stereo bridged audio power amplifi-
ers capable of producing 2W into 4(Note 1) or 2.2W into
3(Note 2) with less than 1.0% THD.
The LM4841 uses advanced, latest generation circuitry to
eliminate all traces of clicks and pops when the supply
voltages is first applied. The amplifier has a headphone-
amplifier-select input pin that is used to switch the amplifiers
from bridge to single-ended mode for driving headphones. A
new circuit topology eliminates headphone output coupling
capacitors (patent pending).
Boomer® audio integrated circuits are designed specifically
to provide high quality audio while requiring a minimum
amount of external components. The LM4841 incorporates a
DC volume control, stereo bridged audio power amplifiers
and a selectable gain or bass boost, making it optimally
suited for multimedia monitors, portable radios, desktop, and
portable computer applications.
The LM4841 features an externally controlled, low-power
consumption shutdown mode (Shutdown Low), and both a
power amplifier and headphone mute for maximum system
flexibility and performance.
Note 1: When properly mounted to the circuit board, LM4841MH and
LM4841LQ will deliver 2W into 4. The LM4841MT will deliver 1.1W into 8.
See the Application Information section for LM4841MH usage information.
Note 2: An LM4841MH that has been properly mounted to the circuit board
and forced-air cooled will deliver 2.2W into 3.
Key Specifications
n PO at 1% THD+N
n into 3(MH and LQ)
n into 4( MH and LQ)
n into 8(MT, MH, and LQ)
n Single-ended THD+N at 85mW into 32
n Shutdown current
2.2W (typ)
2.0W (typ)
1.1W (typ)
1.0%(typ)
0.7µA (typ)
Features
n Stereo headphone amplifier mode that eliminates the
Output Coupling Capacitors (patent pending)
n Acoustically Enhanced DC Volume Control Taper
n System Beep Detect
n Stereo switchable bridged/single-ended power amplifiers
n Selectable internal/external gain and bass boost
n Advanced “click and pop” suppression circuitry
n Thermal shutdown protection circuitry
Applications
n Portable and Desktop Computers
n Multimedia Monitors
n Portable Radios, PDAs, and Portable TVs
Connection Diagrams
TSSOP Package
20028002
Top View
Order Number LM4841MT or LM4841MH
See NS Package Number MTC28 for TSSOP and MXA28A for Exposed-DAP TSSOP
Boomer® is a registered trademark of National Semiconductor Corporation.
© 2002 National Semiconductor Corporation DS200280
www.national.com

1 page




LM4841MH pdf
Typical Application
FIGURE 2. Typical Application Circuit ( MT / MH Package Pinout )
20028003
Truth Table for Logic Inputs (Note 16)
Headphone
Sense
X
X
X
X
On
Off
On
Off
X
Gain Select
0
0
1
1
0
0
1
1
X
Mode
0
0
0
0
1
1
1
1
X
Mute
0
0
0
0
0
0
0
0
1
Output Stage Set
To
Internal Gain
Internal Gain
External Gain
External Gain
Internal Gain
External Gain
External Gain
Internal Gain
X
Volume Control
On
On
On
On
On
On
On
On
Muted
Note 16: If system beep is detected on the Beep In pin (pin 11), the system beep will be passed through the bridged amplifier regardless of the logic of the Mute
and HP sense pins.
5 www.national.com

5 Page





LM4841MH arduino
Typical Performance Characteristics
Output Power vs
Load Resistance
Output Power vs
Load Resistance
20028062
Output Power vs
Load Resistance
Power Supply
Rejection Ratio
20028006
Dropout Voltage
20028007
20028039
Output Power vs
Load Resistance
20028053
11
20028008
www.national.com

11 Page







PáginasTotal 30 Páginas
PDF Descargar[ Datasheet LM4841MH.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
LM4841MHStereo 2W Amplifiers with DC Volume Control/ Transient Free Outputs/ and Cap-less Headphone DriveNational Semiconductor
National Semiconductor
LM4841MTStereo 2W Amplifiers with DC Volume Control/ Transient Free Outputs/ and Cap-less Headphone DriveNational Semiconductor
National Semiconductor

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar