|
|
PDF LM4782TA Data sheet ( Hoja de datos )
| Número de pieza | LM4782TA | |
| Descripción | 3 Channel 25W Audio Power Amplifier with Mute and Standby | |
| Fabricantes | National Semiconductor | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de LM4782TA (archivo pdf) en la parte inferior de esta página. Total 26 Páginas | ||
|
No Preview Available !
February 2004
LM4782 Overture™ Audio Power Amplifier Series
3 Channel 25W Audio Power Amplifier with Mute and
Standby
General Description
The LM4782 is a three channel audio amplifier capable of
typically delivering 25W per channel of continuous average
output power into an 8Ω load with less than 0.5% THD+N
from 20Hz - 20kHz.
The LM4782 is fully protected utilizing National’s Self Peak
Instantaneous Temperature (˚Ke) (SPiKeTM) protection cir-
cuitry. SPiKe provides a dynamically optimized Safe Operat-
ing Area (SOA). SPiKe protection completely safeguards the
LM4782’s outputs against over-voltage, under-voltage, over-
loads, shorts to the supplies or GND, thermal runaway and
instantaneous temperature peaks. The advanced protection
features of the LM4782 places it in a class above discrete
and hybrid amplifiers.
Each amplifier of the LM4782 has an independent smooth
transition fade-in/out mute and a power conserving standby
mode. The mute and standby modes can be controlled by
external logic.
The LM4782 can easily be configured for bridge or parallel
operation for higher power and bi-amp solutions.
Key Specifications
j Output Power/Channel with 0.5% THD+N,
1kHz into 8Ω
25W (typ)
j THD+N at 3x15W into 8Ω (20Hz - 20kHz) 0.2% (typ)
j THD+N at 3x15W into 6Ω (20Hz - 20kHz) 0.3% (typ)
j THD+N at 3x15W into 4Ω (20Hz - 20kHz) 0.4% (typ)
j Mute Attenuation
115dB (typ)
j PSRR
85dB (min)
j Slew Rate
18V/µs (typ)
Features
n SPiKe Protection
n Low external component count
n Quiet fade-in/out mute mode
n Low power standby mode
n Wide supply range: 20V - 64V
n Signal-to-Noise Ratio ≥ 98dB (ref. to PO = 1W)
Applications
n Audio amplifier for component stereo
n Audio amplifier for compact stereo
n Audio amplifier for home theater in a box (HTB)
n Audio amplifier for self-powered speakers
n Audio amplifier for high-end and HD TVs
Typical Application
200811D2
FIGURE 1. Typical Audio Amplifier Application Circuit
SPiKe™ Protection and Overture™ are trademarks of National Semiconductor Corporation.
© 2004 National Semiconductor Corporation DS200811
www.national.com
1 page  
Bridged Amplifier Application Circuit
FIGURE 2. Bridged Amplifier Application Circuit
200811D3
5 www.national.com
5 Page 
Typical Performance Characteristics (Continued)
Total Power Dissipation
vs Output Power/Channel
1% THD (max), RL = 6Ω, 80kHz BW
Total Power Dissipation
vs Output Power/Channel
1% THD (max), RL = 8Ω, 80kHz BW
200811E7
Crosstalk vs Frequency
±19V, POUT = 10W, Channel 1
RL = 4Ω, 80kHz BW
200811E8
Crosstalk vs Frequency
±19V, POUT = 10W, Channel 2
RL = 4Ω, 80kHz BW
200811H1
Crosstalk vs Frequency
±19V, POUT = 10W, Channel 3
RL = 4Ω, 80kHz BW
200811H2
Two Channels On Crosstalk vs Frequency
±19V, POUT = 10W,
RL = 4Ω, 80kHz BW
200811H3
11
200811G9
www.national.com
11 Page | ||
| Páginas | Total 26 Páginas | |
| PDF Descargar | [ Datasheet LM4782TA.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| LM4782TA | 3 Channel 25W Audio Power Amplifier with Mute and Standby | National Semiconductor |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |