DataSheet.es    


PDF MB90214 Data sheet ( Hoja de datos )

Número de pieza MB90214
Descripción (MB90210 Series) 16-bit Proprietary Microcontroller
Fabricantes Fujitsu Media Devices 
Logotipo Fujitsu Media Devices Logotipo



Hay una vista previa y un enlace de descarga de MB90214 (archivo pdf) en la parte inferior de esta página.


Total 30 Páginas

No Preview Available ! MB90214 Hoja de datos, Descripción, Manual

FUJITSU SEMICONDUCTOR
DATA SHEET
DS07-13501-6E
16-bit Proprietary Microcontroller
CMOS
F2MC-16F MB90210 Series
MB90214/P214A/P214B/W214A/W214B/V210
s OUTLINE
The MB90210 series is a line of 16-bit microcontrollers particularly suitable for system control of video cameras,
VTRs, and copiers. The F2MC-16F CPU integrated in this series is based on the F2MC*-16, while providing
enhanced instructions for high-level languages and supporting extended addressing modes.
The MB90210 series incorporates a variety of peripheral resources such as a PWC timer with 4 channels, a 10-
bit A/D converter with 8 channels, UART serial ports with 3 channels (1 channel for CTS and 1 channel for dual
input/output pin switching), 16-bit reload timers with 8 channels, and an 8-bit PPG timer with 1 channel.
MB90P214B/W214B is under development.
*: F2MC stands for FUJITSU Flexible Microcontroller.
s PACKAGE
80-pin Plastic QFP
80-pin Ceramic QFP
(FPT-80P-M06)
(FPT-80C-C02)

1 page




MB90214 pdf
MB90210 Series
s DIFFERENCES BETWEEN MB90214 (MASK ROM PRODUCT) AND MB90P214A/P214B/
W214A/W214B
Part number
Item
ROM
Pin function
43 pins
MB90214
Mask ROM
64 Kbytes
MD2 pin
MB90P214A
MB90P214B
OTPROM
64 Kbytes
MB90W214A
MB90W214B
EPROM
64 Kbytes
MD2/VPP pin
Note: MB90V210, device used for evaluation, is not warranted for electrical specifications.
5

5 Page





MB90214 arduino
MB90210 Series
Pin no.
QFP*
54
Pin name
P50
CLK
55 P51
RDY
56 P52
HAK
57 P53
HRQ
58 P54
CTS0
WRH
* : FPT-80P-M06, FPT-80C-C02
Circuit
type
E
E
E
E
D
Function
General-purpose I/O port
This port is available in the single-chip mode and when the CLK
output is disabled.
CLK output pin
This pin is available in an external-bus mode with the CLK output
enabled.
General-purpose I/O port
This port is available in the single-chip mode or when the ready
function is disable.
Ready signal input pin
This pin is available in an external-bus mode and when the ready
function is enabled.
General-purpose I/O port
This port is available in the single-chip mode or when the hold
function is disabled.
Hold acknowledge output pin
This pin is available in an external-bus mode and when the hold
function is enabled.
General-purpose I/O port
This port is available in the single-chip mode or when the hold
function is disabled in an external-bus mode.
Hold request input pin
This pin is available in an external-bus mode and when the hold
function is enabled.
Since this input is used during this operation at any time, the
output by any other function must be suspended unless the
output is intentionally performed.
General-purpose I/O port
This port is available in the single-chip mode, in the external bus
8-bit mode, or when the WRH pin output is disabled.
When these pins are open in input mode, through current may
leak in stop mode/reset mode, be sure to fix these pins to VCC/VSS
level to use these pins in input mode.
UART (ch.0) clear-to-send input pin
Since this input is used whenever the UART (ch.0) CTS function
is enabled, the output by any other function must be suspended
unless the output is intentionally performed.
When these pins are open in input mode, through current may
leak in stop mode/reset mode, be sure to fix these pins to VCC/VSS
level to use these pins in input mode.
Write strobe output pin for the upper eight bits of data bus
This pin is available in the external bus 16-bit mode with the
WRH pin output enabled in an external-bus mode.
(Continued)
11

11 Page







PáginasTotal 30 Páginas
PDF Descargar[ Datasheet MB90214.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
MB90214(MB90210 Series) 16-bit Proprietary MicrocontrollerFujitsu Media Devices
Fujitsu Media Devices

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar