DataSheet.es    


PDF MAX4448ESE Data sheet ( Hoja de datos )

Número de pieza MAX4448ESE
Descripción 6500V/s / Wideband / High-Output-Current / Single- Ended-to-Differential Line Drivers with Enable
Fabricantes Maxim Integrated 
Logotipo Maxim Integrated Logotipo



Hay una vista previa y un enlace de descarga de MAX4448ESE (archivo pdf) en la parte inferior de esta página.


Total 12 Páginas

No Preview Available ! MAX4448ESE Hoja de datos, Descripción, Manual

19-1519 Rev 0; 8/99
6500V/µs, Wideband, High-Output-Current, Single-
Ended-to-Differential Line Drivers with Enable
General Description
The MAX4447/MAX4448/MAX4449 single-ended-to-
differential line drivers are designed for high-speed
communications. Using current feedback for greater
bandwidth, these devices deliver full-power bandwidths
up to 405MHz and feature slew rates as high as
6500V/µs. The MAX4447 has a fixed gain of +2V/V and
a small-signal bandwidth of 430MHz. The MAX4448/
MAX4449 have small-signal bandwidths of 330MHz
and 400MHz, respectively, and are internally compen-
sated for minimum gain configurations of +2V/V and
+5V/V, respectively. For greater design flexibility, the
MAX4448/MAX4449 allow for variable gain selection
using external gain-setting resistors. A low-power
enable mode reduces current consumption below 5.5mA
and places the outputs in a high-impedance state.
The MAX4447/MAX4448/MAX4449 can deliver differen-
tial output swings of ±6.2V from ±5V supplies with a
50load. Excellent differential gain/phase and noise
specifications make these amplifiers ideal for a wide
variety of video and RF signal-processing and transmis-
sion applications.
Applications
Differential Line Driver
Single-Ended-to-Differential Conversion
High-Speed Differential Transmitter
Coaxial to Twisted-Pair Converter
Differential Pulse Amplifier
Differential ADC Driver
xDSL Applications
Video and RF Signal Processing and Transmission
Pin Configuration
TOP VIEW
VCC 1
VCC 2
N.C. 3
N.C. (RG) 4
IN 5
N.C. 6
VEE 7
VEE 8
MAX4447
MAX4448
MAX4449
SO
( ) ARE FOR MAX4448/MAX4449 ONLY
16 GND
15 OUT-
14 VEE
13 VEE
12 VEE
11 VEE
10 OUT+
9 EN
Features
o 6500V/µs Slew Rate (MAX4449)
o Small-Signal Bandwidth
430MHz (MAX4447)
330MHz (MAX4448)
400MHz (MAX4449)
o 200MHz 0.1dB Gain Flatness (MAX4447)
o 130mA Output Drive Current
o +2V/V Internally Fixed Gain (MAX4447)
o External Gain Selection
+2V/V (MAX4448)
+5V/V (MAX4449)
o -78dB SFDR at 100kHz
o Low Differential Gain/Phase: 0.01%/0.02°
o Ultra-Low Noise: 23nV/Hz at fIN = 1MHz
o 8ns Settling Time to 0.1%
Ordering Information
PART
MAX4447ESE
MAX4448ESE
MAX4449ESE
TEMP. RANGE
-40°C to +85°C
-40°C to +85°C
-40°C to +85°C
PIN-PACKAGE
16 Narrow SO
16 Narrow SO
16 Narrow SO
Typical Operating Circuit
+5V
0.1µF
75
INPUT
75
VCC
IN EN OUT+ RT
MAX4447
VEE OUT- RT
GND
0.1µF
75
75
TO
LOAD
-5V
________________________________________________________________ Maxim Integrated Products 1
For free samples & the latest literature: http://www.maxim-ic.com, or phone 1-800-998-8800.
For small orders, phone 1-800-835-8769.

1 page




MAX4448ESE pdf
6500V/µs, Wideband, High-Output-Current, Single-
Ended-to-Differential Line Drivers with Enable
Typical Operating Characteristics
(VCC = +5V, VEE = -5V, VEN = +5V, VOUT = VOUT+ - VOUT-, RL = 100between OUT+ and OUT-, AV = +2V/V for MAX4447/MAX4448,
AV = +5V/V for MAX4449, TA = +25°C, unless otherwise noted.)
MAX4447
MAX4448
MAX4449
SMALL-SIGNAL GAIN vs. FREQUENCY
SMALL-SIGNAL GAIN vs. FREQUENCY
SMALL-SIGNAL GAIN vs. FREQUENCY
(VOUT = 100mVp-p)
(VOUT = 100mVp-p)
(VOUT = 100mVp-p)
444
333
222
111
000
-1 -1 -1
-2 -2 -2
-3 -3 -3
-4 -4 -4
-5 -5 -5
-6
100k
1M 10M 100M
FREQUENCY (Hz)
1G
-6
100k
1M 10M 100M
FREQUENCY (Hz)
1G
-6
100k
1M 10M 100M
FREQUENCY (Hz)
1G
MAX4447
GAIN FLATNESS vs. FREQUENCY
(VOUT = 100mVp-p)
0.5
MAX4448
GAIN FLATNESS vs. FREQUENCY
(VOUT = 100mVp-p)
0.5
MAX4449
GAIN FLATNESS vs. FREQUENCY
(VOUT = 100mVp-p)
0.5
0.4 0.4 0.4
0.3 0.3 0.3
0.2 0.2 0.2
0.1 0.1 0.1
000
-0.1 -0.1 -0.1
-0.2 -0.2 -0.2
-0.3 -0.3 -0.3
-0.4 -0.4 -0.4
-0.5
100k 1M 10M 100M 1G
FREQUENCY (Hz)
MAX4447
LARGE-SIGNAL GAIN vs. FREQUENCY
(VOUT = 2Vp-p)
4
-0.5
100k 1M 10M 100M 1G
FREQUENCY (Hz)
MAX4448
LARGE-SIGNAL GAIN vs. FREQUENCY
(VOUT = 2Vp-p)
4
-0.5
100k 1M 10M 100M 1G
FREQUENCY (Hz)
MAX4449
LARGE-SIGNAL GAIN vs. FREQUENCY
(VOUT = 2Vp-p)
4
333
222
111
000
-1 -1 -1
-2 -2 -2
-3 -3 -3
-4 -4 -4
-5 -5 -5
-6
100k
1M 10M 100M
FREQUENCY (Hz)
1G
-6
100k
1M 10M 100M
FREQUENCY (Hz)
1G
-6
100k
1M 10M 100M
FREQUENCY (Hz)
1G
_______________________________________________________________________________________ 5

5 Page





MAX4448ESE arduino
6500V/µs, Wideband, High-Output-Current, Single-
Ended-to-Differential Line Drivers with Enable
IN
500mV/div
OUT
1V/div
CL = 15pF
IN
500mV/div
OUT
1V/div
CL = 15pF
Figure 3. Capacitive-Loaded Output Step Response Without
Isolation Resistor
Figure 4. Capacitive-Loaded Output Step Response with 14
Isolation Resistor
Setting Gain
The MAX4448/MAX4449 are stable with minimum gain
of +2V/V and +5V/V, respectively. An external resistor,
RGAIN, connected between RG and GND sets the gain
of these devices. Calculate the gain as follows:
Gain = 2 (1 + 300 / RGAIN)
RGAIN for the MAX4449 must be 200.
Driving Capacitive Loads
The MAX4447/MAX4448/MAX4449 are designed to
drive capacitive loads. However, excessive capacitive
loads may cause ringing or instability at the output as
phase margin is reduced. Adding a small series isola-
tion resistor at the output helps reduce the ringing but
slightly increases gain error.
Twisted-Pair Line Driver
The MAX4447/MAX4448/MAX4449 are well-suited to
drive twisted-pair cables. The 24AWG telephone wire
widely used produces losses at the higher frequencies.
Compensate for these losses by increasing the gain
slightly.
Chip Information
TRANSISTOR COUNT: 291
______________________________________________________________________________________ 11

11 Page







PáginasTotal 12 Páginas
PDF Descargar[ Datasheet MAX4448ESE.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
MAX4448ESE6500V/s / Wideband / High-Output-Current / Single- Ended-to-Differential Line Drivers with EnableMaxim Integrated
Maxim Integrated

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar