|
|
Número de pieza | MCH32 | |
Descripción | High capacitance | |
Fabricantes | ETC | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de MCH32 (archivo pdf) en la parte inferior de esta página. Total 5 Páginas | ||
No Preview Available ! 3225(1210)Size chip capacitors : MCH32
High capacitance
Achieved high capacitance by thin and multi layer technology
Lead-free plating terminal
No polarity
Quick Reference
The design and specifications are subject to change without prior notice. Before ordering or using,
please check the latest technical specifications. For more detail information regarding temperature
characteristic code and packaging style code, please check product destination.
Range of thermal compensation capacitors
Temperature
MCH32
Rated voltage(V)
Product thickness(mm)
Capacitance(pF)
Capacitance tolerance
Nominal capacitance series
A,AN CG
C0G CH Characteristic
50V
2.5 0.3
100,000
J5
Range of high dielectric constant capacitors
Temperature CN R B X7R Characteristic CN X5R Characteristic
MCH32
Rated voltage(V)
Product thickness(mm)
16V
2.0 0.2
10V
2.3 0.2
Capacitance(pF) 4,700,000 10,000,000 15,000,000 22,000,000
Capacitance tolerance
M 20%
Nominal capacitance series
E6
FN F
16V
22,000,000
Z
Y5V Characteristic
16V
2.0 0.2
47,000,000
80 20%
E3
KP
KP
External dimensions (Unit : mm)
0.2Min.
1.0Min.
Product thickness(mm)
2.0 0.2
T 2.3 0.2
2.5 0.3
Production
designation
Code Prduct thickness
K 0.85mm
P 2.3mm
P 2.5mm
Packing specification
Reel Basic ordering unit(pcs.)
180mm 7in. 4,000
180mm 7in. 1,000
180mm 7in. 1,000
3.2 0.4
2.5 0.3
T
Product No. list
MCH 3 2 3 F N 2 2 6 Z K
Code Voltage
4 10V
3 16V
5 50V
Nominal Capacitance tolerance
Code EIA code Operating temp. range( ) Temp. coefficient or percent change capacitance Code Tolerance
A,AN CG C0G
55 125 0 30ppm
CH 55 125 0 60ppm
J 5 11pF or more
CN R
55 125
15
3-digit
B 25 85
X5R 55 85
X7R 55 125
10
15
designation
accordijg
M
20
15 to IEC
FN F
Y5V
25 85
30 85
30 , 80
22 , 82
Z 80 , 20
Thermal compensation capacitors
Capacitance
pF
100,000
Tolerance
J 5%
Product thickness(mm)
2.5 0.3
A AN CG COG CH Characteristic
50V
MCH325A AN 104JP
High dielectric constant capacitors
Capacitance
pF
4,700,000
6,800,000
10,000,000
15,000,000
22,000,000
Tolerance
K 10%
CN R B X7R Characteristic CN X5R Characteristic
16V 16V
Product thickness(mm)
MCH323CN475MP
2.0 0.2 MCH323CN685MP
MCH323CN106MP
2.3 0.2
MCH324CN156MP
MCH324CN226MP
Capacitance
pF
22,000,000
47,000,000
Tolerance
Z 80%,
20%
Product thickness(mm)
2.0 0.2
FN F Y5V Characteristic
16V 10V
MCH323FN226ZP
MCH324FN476ZP
1 page Appendix
Notes
No technical content pages of this document may be reproduced in any form or transmitted by any
means without prior permission of ROHM CO.,LTD.
The contents described herein are subject to change without notice. The specifications for the
product described in this document are for reference only. Upon actual use, therefore, please request
that specifications to be separately delivered.
Application circuit diagrams and circuit constants contained herein are shown as examples of standard
use and operation. Please pay careful attention to the peripheral conditions when designing circuits
and deciding upon circuit constants in the set.
Any data, including, but not limited to application circuit diagrams information, described herein
are intended only as illustrations of such devices and not as the specifications for such devices. ROHM
CO.,LTD. disclaims any warranty that any use of such devices shall be free from infringement of any
third party's intellectual property rights or other proprietary rights, and further, assumes no liability of
whatsoever nature in the event of any such infringement, or arising from or connected with or related
to the use of such devices.
Upon the sale of any such devices, other than for buyer's right to use such devices itself, resell or
otherwise dispose of the same, no express or implied right or license to practice or commercially
exploit any intellectual property rights or other proprietary rights owned or controlled by
ROHM CO., LTD. is granted to any such buyer.
Products listed in this document use silicon as a basic material.
Products listed in this document are no antiradiation design.
The products listed in this document are designed to be used with ordinary electronic equipment or devices
(such as audio visual equipment, office-automation equipment, communications devices, electrical
appliances and electronic toys).
Should you intend to use these products with equipment or devices which require an extremely high level of
reliability and the malfunction of with would directly endanger human life (such as medical instruments,
transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers and other
safety devices), please be sure to consult with our sales representative in advance.
About Export Control Order in Japan
Products described herein are the objects of controlled goods in Annex 1 (Item 16) of Export Trade Control
Order in Japan.
In case of export from Japan, please confirm if it applies to "objective" criteria or an "informed" (by MITI clause)
on the basis of "catch all controls for Non-Proliferation of Weapons of Mass Destruction.
Appendix1-Rev1.0
5 Page |
Páginas | Total 5 Páginas | |
PDF Descargar | [ Datasheet MCH32.PDF ] |
Número de pieza | Descripción | Fabricantes |
MCH3007 | RF Transistor | ON Semiconductor |
MCH3105 | High-Current Switching Applications | Sanyo |
MCH3105 | Bipolar Transistor | ON Semiconductor |
MCH3106 | DC / DC Converter Applications | Sanyo |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |