|
|
Número de pieza | MD57-0001SMB | |
Descripción | Low Cost MMIC Mixer with Local Oscillator Amplifier / 0.8 GHz - 1.0 GHz | |
Fabricantes | Tyco | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de MD57-0001SMB (archivo pdf) en la parte inferior de esta página. Total 4 Páginas | ||
No Preview Available ! Low Cost MMIC Mixer with Local Oscillator Amplifier, 0.8-1.0 GHz
MD5M7D-0570-000101
Low Cost MMIC Mixer with Local Oscillator
Amplifier, 0.8 GHz - 1.0 GHz
Features
• -5 to +5 dBm LO Drive Level
• High Isolation, 28 dB LO to RF
• Inexpensive SOT-26 Package
SOT-26
.114 ±.008
2,9 ±0,2
.075 ±.008
1,90 ±0,2
Description
The MD57-0001 is a floating FET mixer with an on-chip LO
amplifier. The LO drive for the MD57-0001 can range from -5 to
+5 dBm without severly impacting the mixer’s performance. The
MD57-0001 is ideally suited for cellular band communications
handsets’ that can provide only minimal amounts of LO drive.
Typical applications include frequency up/down conversion and
IQ modulation and demodulation in digital receivers and
transmitters.
The MD57-0001 utilizes a patented “floating-FET” architecture.
The on-chip LO amplifier allows the MD57-0001 to operate with
as little as -5 dBm of LO drive making it an ideal choice for low
power portable designs.
The MD57-0001 is fabricated using M/A-COM’s 0.5 micron low
noise GaAs MESFET process. This process features full
passivation for increased performance and reliability. The
MD57-0001 is 100% RF tested to ensure superior performance
specification compliance.
.063
+.008
-.004
1,60 +0.20
-0.10
16XY
.110 ±.008
2,80 ±0,2
PIN # 1
.031+-..000074
0,79
+0.10
-0.18
.016-+..000024
0,40
+0.10
-0.05
.002 ±.002
0,05 ±0,05
.006-+..000024
0,15
+0.10
-0.05
.008 MIN
0,20 MIN
.043
+.008
-.004
1,10+-00..1200
Ordering Information
Part Number
Package
MD57-0001
SOT-26, 6-Lead Plastic Package
MD57-0001TR
Forward Tape and Reel*
MD57-0001SMB
Designer’s Kit
*If a specific reel size is required, consult factory for part number.
Electrical Specifications1
TA = +25°C, RF = 900MHz (-15 dBm), LO = 730MHz (-5 dBm), IF = 170MHz, VDD = 2.7V, Typical IDD = 5mA
Parameters
Abbv.
Test Conditions
Units Min. Typ.
Conversion Loss
Isolation
Lc —
ISO LO to RF
dB — 9.3
dB 20 28
LO to IF
dB 10 12
RF to IF
dB — 20
VSWR
VSWR
RF Port
— — 2.0:1
LO Port
— — 2.0:1
IF Port
— — 2.0:1
Input 1 dB Compression
Two Tone IM Ratio1
P1dB RF Freq. = 900 MHz, LO = -5 dBm dBm —
dBc Two tones at -10 dBm each; dBc —
14
59
Tone spacing = 1 MHz, IF = 170 MHz
1. IMR vs. RF drive can be calculated by the formula: IMR = [44 - 1.5(PIN)]
Max.
11
—
—
—
—
—
—
—
—
V2.00
M/A-COM Division of AMP Incorporated s North America: Tel. (800) 366-2266, Fax (800) 618-8883 s Asia/Pacific: Tel.+85 2 2111 8088, Fax +85 2 2111 8087
s Europe: Tel. +44 (1344) 869 595, Fax+44 (1344) 300 020
www.macom.com
AMP and Connecting at a Higher Level are trademarks.
Specifications subject to change without notice.
1 page |
Páginas | Total 4 Páginas | |
PDF Descargar | [ Datasheet MD57-0001SMB.PDF ] |
Número de pieza | Descripción | Fabricantes |
MD57-0001SMB | Low Cost MMIC Mixer with Local Oscillator Amplifier / 0.8 GHz - 1.0 GHz | Tyco |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |