|
|
Número de pieza | LB1999M | |
Descripción | Three-Phase Brushless Motor Driver for VCR Capstan Motors | |
Fabricantes | Sanyo | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de LB1999M (archivo pdf) en la parte inferior de esta página. Total 8 Páginas | ||
No Preview Available ! Ordering number : EN5975
Monolithic Digital IC
LB1999M
Three-Phase Brushless Motor Driver
for VCR Capstan Motors
Overview
The LB1999M is a 3-phase brushless motor driver that is
particularly appropriate for VCR capstan motor drivers.
Functions
· 3-phase full-wave drive
· Built-in torque ripple correction circuit (fixed correction
ratio)
· Built-in current limiter circuit and control characteristics
that include gain switching
· Upper and lower side output stage over-saturation
prevention circuit that does not require external
capacitors.
· FG amplifier with built-in Schmitt comparator
· Thermal shutdown circuit
Package Dimensions
unit: mm
3129-MFP36SLF
[LB1999M]
SANYO: MFP36SLF
Independent IC
Ambient temperature, Ta — °C
Any and all SANYO products described or contained herein do not have specifications that can handle
applications that require extremely high levels of reliability, such as life-support systems, aircraft’s
control systems, or other applications whose failure can be reasonably expected to result in serious
physical and/or material damage. Consult with your SANYO representative nearest you before using
any SANYO products described or contained herein in such applications.
SANYO assumes no responsibility for equipment failures that result from using products at values that
exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other
parameters) listed in products specifications of any and all SANYO products described or contained
herein.
SANYO Electric Co.,Ltd. Semiconductor Bussiness Headquarters
TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN
O3098RM (OT) No. 5975-1/8
1 page LB1999M
Continued from preceeding page.
Pin No.
21
23
31
Pin
VS
Rf (PWR)
Rf (SNS)
Function
Output block power supply
Output current detection. The control block current limiter
operates using the resistor Rf connected between these pins
and ground. Also, the lower side saturation prevention circuit
and the torque ripple correction circuit operate based on the
voltages to this pin. It is especially important to note that,
since the saturation prevention level is set using this voltage,
the lower side saturation prevention circuit will become less
effective in the large current region if the value of Rf is
lowered excessively. Also, the PWR and SENSE pins must
be connected together.
26
UOUT
U phase output
27
VOUT
V phase output (Spark killer diodes are built-in.)
28
WOUT
W phase output
Ground sensing. The influence of the common ground
32
GSENSE
impedance on Rf can be excluded by connecting this pin to
nearest ground for the Rf resistor side of the motor ground
wiring that includes Rf. (This pin must not be left open.)
Forward/reverse selection. The voltage applied to this pin
33 FR selects the motor direction (forward or reverse).
(Vth = 2.5 V at VCC = 5 V (typical))
Pin Assignment
Equivalent circuit
Note: Although the FRAME pins and
the GND pins are not connected
internally, the potentials of the
GND pins and the FRAME pins
externally be identical to assure
ground potential stability.
No. 5975-5/8
5 Page |
Páginas | Total 8 Páginas | |
PDF Descargar | [ Datasheet LB1999M.PDF ] |
Número de pieza | Descripción | Fabricantes |
LB1999 | Three-Phase Brushless Motor Driver for VCR Capstan Motors | Sanyo |
LB1999M | Three-Phase Brushless Motor Driver for VCR Capstan Motors | Sanyo |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |