|
|
Número de pieza | CXG1092N | |
Descripción | SP5T GSM Triple-Band Antenna Switch | |
Fabricantes | Sony Corporation | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de CXG1092N (archivo pdf) en la parte inferior de esta página. Total 6 Páginas | ||
No Preview Available ! CXG1092N
SP5T GSM Triple-Band Antenna Switch
For the availability of this product, please contact the sales office.
Description
The CXG1092N is a high power antenna MMIC
switch for use in triple-band GSM handsets.
One antenna can be routed to either of the 2 Tx or
3 Rx ports.
20 pin SSOP (Plastic)
Features
• 4 CMOS compatible control lines
• Standby control
• 34.5dBm power handling at 5.0V (GSM900)
• Low second harmonic < –36dBm at 34.5dBm
• Small package size: 20-pin SSOP (6.4 × 5.0 × 1.25mm)
Applications
Triple-band handsets using combinations of GSM900/DCS1800/PCS1900 and DECT
Structure
GaAs J-FET MMIC (The Sony JFET process is used for low insertion loss.)
Absolute Maximum Ratings (Ta = 25°C)
• Bias voltage
VDD 7 V
• Control voltage Vctl 5 V
• Operating temperature Topr –35 to +85 °C
• Storage temperature Tstg –65 to +150 °C
Note on Handling
GaAs MMICs are ESD sensitive devices. Special handling precautions are required.
Sony reserves the right to change products and specifications without prior notice. This information does not convey any license by
any implication or otherwise under any patents or other right. Application circuits shown, if any, are typical examples illustrating the
operation of the devices. Sony cannot assume responsibility for any problems arising out of the use of these circuits.
–1–
E99Z07-PS
1 page CXG1092N
Application Note (1)
Impedance matching for harmonic minimization
To achieve the 2nd harmonic levels lower than –36dBm for GSM900
Design of 1.8GHz harmonic matching network and the 900MHz trap network is dependent on the board design
and components.
ANT 11
GND 12
GND 13
VDD 14
GND 15
GSM900 CTL 16
DCS1800 CTL 17
PCS1900 CTL 18
RX ON 19
GND 20
1800MHz Matching
Network
10
Tx1
9 GND
8 Tx2
7 GND
6 Rx1
5 GND
4 Rx2
3 GND
2 Rx3
1 STDBY
900MHz Trap
LPF
Application Note (2)
Operating the CXG1092 from a 3V supply
200k
200k
Logic lines
Tx1
Tx2
ANT
Rx1 CXG1092N
Rx2
Rx3
VDD
∗
Additional Components
C: 0603 CAPS, few µF
R: 200R
D: Low Turn-on voltage diode
577µs
200k
Technique
Allows use of the CXG1092N (SP5T) in handsets
with 3V min. battery voltage (2.7V SW supply).
The CXG1092N is for 5V nominal battery voltage
but work well down to 4V.
Fundamentally, the 577µs time slot waveform is
used to increase the 2.7V supply to over 4V.
∗ This waveform may be taken from the PA
ramping input (or drain supply in case of drain
power control) or via the TX ON/OFF logic.
C D ≈ 4.0V D.C. Out
RC
VDD @2.7V
–5–
5 Page |
Páginas | Total 6 Páginas | |
PDF Descargar | [ Datasheet CXG1092N.PDF ] |
Número de pieza | Descripción | Fabricantes |
CXG1092 | SP5T GSM Triple-Band Antenna Switch | Sony Corporation |
CXG1092N | SP5T GSM Triple-Band Antenna Switch | Sony Corporation |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |