|
|
Número de pieza | BH9596FP-Y | |
Descripción | SCSI active terminator | |
Fabricantes | ROHM Semiconductor | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de BH9596FP-Y (archivo pdf) en la parte inferior de esta página. Total 6 Páginas | ||
No Preview Available ! Mulimedia ICs
SCSI active terminator
BH9595FP-Y / BH9596FP-Y
These SCSI active terminators, developed as a substitute for conventional discrete terminators, maintain good con-
sistency between VM level (2.85V) and GND level (0V) and between VM level and VDD level, and have extremely
low power consumption, dropping to a maximum of 90 milliwatts at standby (compared to the maximum of 990 milli-
watts used by conventional resistance terminators). These SCSI active terminators electrically control SCSI lines,
connecting and disengaging the terminating resistor by electrically controlling the enable pin. (The enable pin is
enabled at the HIGH level and switched to the High-Z state by the LOW level in the BH9595 and by the HIGH level in
the BH9596, completely disconnecting the SCSI line from the SCSI terminator.)
These SCSI active terminators allow for the configuration of flexible, energy-saving SCSI networks, and are ideal for
notebook computers, hard disk drives and a wide range of other products with SCSI capabilities.
•Applications
Compact disk drives, optical disk drives, CD-ROM dri-
ves, tape drives, personal computers (including laptop
computers and notebook computers), workstations,
mainframes, laser printers, plotters
•Features
1) Internal 2.85V power supply and push-pull opera-
tion, for good consistency at all signal levels.
2) Enable pin for terminator enabling and disconnect-
ing, facilitating SCSI network construction.
3) Low power consumption, ideal for energy-saving
systems.
Power consumption during standby : 90mW (com-
pared to 990mW for conventional resistor termina-
tors)Power consumption at 25% duty : 614mW
(compared to 1,360mW for convention resistor ter-
minators)Significant reductions in power consump-
tion are possible.
4) Wide operating range.
TERM power : 4.0 ~ 5.5V (Transient : 6.0V)
5) Thin, microminiature design, ideal for space-saving
applications.
Package body size : 13.6 × 5.4 × 1.9mm
6) Active termination of 18-line SCSI.
7) Internal thermal shutdown circuit.
8) Compatibility with SCSI-I and SCSI-II.
1
1 page Mulimedia ICs
BH9595FP-Y / BH9596FP-Y
•Application example
System
Power
TERMPWR Line
2.2µ
+
–
VDD1
SCSI Line
SCSI Line
#1 #1
SCSI DATA LINES
SCSI
Active
Terminator
SCSI
Active
Terminator
VDD1
System
Power
+
2.2µ
–
EN
GND
#18
VM
#18
VM
EN
GND
Fig. 2
5
5 Page |
Páginas | Total 6 Páginas | |
PDF Descargar | [ Datasheet BH9596FP-Y.PDF ] |
Número de pieza | Descripción | Fabricantes |
BH9596FP-Y | SCSI active terminator | ROHM Semiconductor |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |