|
|
PDF AP4460A Data sheet ( Hoja de datos )
| Número de pieza | AP4460A | |
| Descripción | Step-up DC-DC Converter | |
| Fabricantes | AKM | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de AP4460A (archivo pdf) en la parte inferior de esta página. Total 3 Páginas | ||
|
No Preview Available !
[AP4460A]
AP4460A
Step-up DC-DC Converter with Power Path for Single Solar Cell
1. General Description
The AP4460A is a synchronous step-up DC-DC converter that can be operated by a single solar cell. It has a
power management function which supplies power to an external system, charges super capacitors, or supplies
power from the super capacitor to the system. The DC-DC converter is a hysteric comparator type and composed
of an ultra-low power start-up circuit which starts from only 0.35 V. Because the power consumption is extremely
low, the AP4460A can operate from the input power of around 50μW generated by a solar panel under indoor
lighting. The input voltage of the DC-DC converter, i.e. output voltage of the solar cell is controlled by external
resistors for the reference voltage of the IC. The best power efficiency can be obtained by adjusting this input
level setting according to the characteristics of a connected solar cell. The AP4460A has a Power-Path Control
switches for supplying power to the external system and charging a super capacitor. When the output voltage of
DC-DC converter reaches a target voltage, the IC starts to charge a compact capacitor. After charging up to the
target voltage of a compact capacitor, then the IC starts to supply power to the external system. Supplying power
to the external system via capacitor makes it possible to operate high load external system even with a low input
power. If the input power is surplus, the extra power is stored gradually in a super capacitor. The super capacitor
automatically supplies power to the external system, if the power supply input is low. The AP4460A is suitable
for sensor nodes of energy harvesting equipment.
2. Features
Start-up Voltage
Operating Temperature Range
Input Voltage
DC-DC Output Voltage
0.35V
-30 ~ 85°C
from 0.14V
2.5 ~ 4.0V (±5%)
Step up DC-DC Converter with Hysteric Comparator Control
Synchronous Rectification by High-side Zero-cross Detection
Input Voltage Control Function
Power Path Function with Automatic Control
Battery Compatible Mode
Power Generation Monitoring Function
Efficiency
Package
Applications
80% (When 0.5V and 1mA Input, 3V output)
24-pin QFN
- Power Supply Systems by Single Solar Cell
- Portable Electronics
- Sensor Nodes
- Wearable Devices
Rev.0.3
2014/06
-1-
1 page | ||
| Páginas | Total 3 Páginas | |
| PDF Descargar | [ Datasheet AP4460A.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| AP4460 | Step-up DC-DC Converter | AKM |
| AP4460A | Step-up DC-DC Converter | AKM |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |