|
|
Número de pieza | APW7566 | |
Descripción | The Synchronous Buck Converter | |
Fabricantes | ANPEC | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de APW7566 (archivo pdf) en la parte inferior de esta página. Total 19 Páginas | ||
No Preview Available ! APW7566/A
The Synchronous Buck Converter with 300mA LDO
Features
General Description
• Wide Input Operating Range: 4.5V~5.5V
• Synchronous Buck Regulators for SoC:
-Fixed 1.05V (For APW7566)
-Fixed 1.2V (For APW7566A)
- 1.2A peak Output Current for Core Power
- 2MHz Switching Frequency
• Low-Dropout Linear Regulators for System Power:
- Fixed 3.3V, 300mA Output Current with high PSRR
• Thermal-Overload Protection
• Power-OK Indicator after LDO Ready
• TDFN2x2-8 Package
• Lead Free Green Devices Available (RoHS
Compliant)
Applications
• IP-Cam
• Car Recorder
• Security
The APW7566 is P-channel low dropout linear regulator
and synchronous buck converter which needs input volt-
age from 4.5 to 5.5V.
Synchronous buck converter is integrated high side and
low side power MOSFET. It is equipped with an auto-
matic PSM/PWM mode operation. At light load, the IC op-
erates in the PSM mode to reduce the switching losses.
At heavy load, the IC works in PWM mode.
Low dropout linear regulator delivers current up to 300mA
to set output voltage, and it also can work with low ESR
ceramic capacitors. Typical dropout voltage is only 240mV
at 300mA loading.
The APW7566 is equipped with Power-on-reset, shut-
down control, soft start, over-temperature and current-
limit into a single package to protect the device against
wrong logic control and over-temperature and current
over-loads.
The APW7566 available TDFN2x2-8 provides a very com-
pact system solution external components and PCB area.
Simplified Application Circuit
VIN
Cin
VDD
EN
LX
PGND
POK
VLDO
CLDO
POK
PWM_FB
VLDO
AGND
VPWM
L
Cout
ANPEC reserves the right to make changes to improve reliability or manufacturability without notice, and
advise customers to obtain the latest version of relevant information to verify before placing orders.
Copyright © ANPEC Electronics Corp.
Rev. A.2 - Jan., 2016
1
www.anpec.com.tw
1 page APW7566/A
Electrical Characteristics
Unless otherwise specified, these specifications apply over VDD=5V. Typical values are at TA=25oC.
Symbol
Parameter
Test Conditions
APW7566
Min Typ
Max
PROTECTIONS(PWM, LDO)
T OTP
Over-Temperature Protection
Over-Temperature Protection
Hysteresis
TJ Rising
TJ Falling
- 150 -
- 30 -
Note 5: Guaranteed by design.
Unit
°C
°C
Copyright © ANPEC Electronics Corp.
Rev. A.2 - Jan., 2016
5
www.anpec.com.tw
5 Page APW7566/A
Typical Application Circuit
POK
VIN
6
AVDD
C1
22uF/6.3V
3 EN
1
LX
8
PGND
APW7566/A
4
POK
PWM_FB
VLDO
5
VLDO
C4
4.7uF/6.3V
AGND
7
2
L1 2.2uH
VPWM
C2
22uF/6.3V
*Recommend:
The C1 capacitor must be close to the IC side less than 3mm.
Copyright © ANPEC Electronics Corp.
Rev. A.2 - Jan., 2016
11
www.anpec.com.tw
11 Page |
Páginas | Total 19 Páginas | |
PDF Descargar | [ Datasheet APW7566.PDF ] |
Número de pieza | Descripción | Fabricantes |
APW7566 | The Synchronous Buck Converter | ANPEC |
APW7566A | The Synchronous Buck Converter | ANPEC |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |