|
|
Número de pieza | RClamp0552T | |
Descripción | Ultra Low Capacitance TVS 2-Line ESD Protection | |
Fabricantes | Semtech | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de RClamp0552T (archivo pdf) en la parte inferior de esta página. Total 7 Páginas | ||
No Preview Available ! PROTECTION PRODUCTS - RailClamp®
Description
RailClamp® TVS arrays are ultra low capacitance ESD
protection devices designed to protect high speed data
interfaces. They are designed to replace 0201 size mul-
tilayer varistors (MLVs) in portable applications such as
cell phones, notebook computers, and other portable
electronics. This device offers desirable characteristics
for board level protection including fast response time,
low operating and clamping voltage, and no device deg-
radation.
The RClamp®0552T has a maximum capacitance of
only 0.40pF. This allows it to be used on circuits
operating in excess of 5GHz without signal attenuation.
The RClamp0552T is in a 3-pin SLP1006N3T package.
It measures 1.0 x 0.6 mm with a nominal height of only
0.4mm. The leads are finished with lead-free NiPdAu.
Each device will protect two lines operating at 5 volts.
It gives the designer the flexibility to replace multiple
single line devices in space constrained applications.
They may be used to meet the ESD immunity require-
ments of IEC 61000-4-2. The combination of small
size and high ESD surge capability makes them ideal
for use in portable applications such as cellular
phones, digital cameras, and MP3 players.
RClamp0552T
Ultra Low Capacitance TVS
2-Line ESD Protection
Features
High ESD withstand Voltage: +/-17kV (Contact and
Air) per IEC 61000-4-2
Very small PCB area: 0.6mm2
Protects up to two high-speed data lines
Low reverse current: <5nA typical (VR=5V)
Working voltage: +/- 5V
Low capacitance: <0.4pF (VR=0V)
Low dynamic resistance: 0.90 Ohms (Typ)
Solid-state silicon-avalanche technology
Mechanical Characteristics
SLP1006N3T package
Pb-Free, Halogen Free, RoHS/WEEE Compliant
Nominal Dimensions: 1.0 x 0.6 x 0.40 mm
Lead Finish: NiPdAu
Molding compound flammability rating: UL 94V-0
Marking : Marking code + dot matrix date code
Packaging : Tape and Reel
Applications
HDMI 1.3 and HDMI 1.4
USB 3.0
MHL
eDP
LVDS Interfaces
eSATA Interfaces
Dimensions
1.00
0.68
12
0.60
Schematic & PIN Configuration
12
0.40
Nominal Dimensions (mm)
Revision 3/19/2013
1
3
2-Line, Bidirectional
www.semtech.com
1 page PROTECTION PRODUCTS
Applications Information
Device Connection Options
The RClamp0552T is designed to protect two high-
speed data lines operating up to 5 volts. The device is
bidirectional and may be used on lines where the signal
polarity is above and below ground. The diagram at the
right shows an example pin configuration with pin 3
connected to ground. However, due to the device
symmetry, any pin may be connected to ground with
the remaining pins conneted to the protected lines.
Assembly Guidelines
The small size of this device means that some care
must be taken during the mounting process to insure
reliable solder joint. The table below provides
Semtech's recommended assembly guidelines for
mounting this device. The figure at the right details
Semtech’s recommended aperture based on the
below recommendations. Note that these are only
recommendations and should serve only as a starting
point for design since there are many factors that
affect the assembly process. The exact manufactur-
ing parameters will require some experimentation to
get the desired solder application.
Assembly Parameter
Solder Stencil Design
Aperture shape
Solder Stencil Thickness
Solder Paste Type
Solder Reflow Profile
PCB Solder Pad Design
PCB Pad Finish
Recommendation
Laser cut, Electro-polished
Rectangular
0.100 mm (0.004")
Type 4 size sphere or smaller
Per JEDEC J-STD-020
Non-Solder mask defined
OSP OR NiAu
RClamp0552T
Example Pin Configuration
I/O 1 1
I/O 2
GND
Recommended Mounting Pattern
Stencil Opening (220x460 mm)
Land Pad (200x400 mm)
.850
1.000
All Dimensions are in mm.
Land Pad.
Stencil opening
Component
© 2013 Semtech Corporation
5
www.semtech.com
5 Page |
Páginas | Total 7 Páginas | |
PDF Descargar | [ Datasheet RClamp0552T.PDF ] |
Número de pieza | Descripción | Fabricantes |
RClamp0552T | Ultra Low Capacitance TVS 2-Line ESD Protection | Semtech |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |