DataSheet.es    


PDF MASW-009101 Data sheet ( Hoja de datos )

Número de pieza MASW-009101
Descripción SPDT Default On High Isolation CATV Switch
Fabricantes MA-COM 
Logotipo MA-COM Logotipo



Hay una vista previa y un enlace de descarga de MASW-009101 (archivo pdf) en la parte inferior de esta página.


Total 7 Páginas

No Preview Available ! MASW-009101 Hoja de datos, Descripción, Manual

MASW-009101
SPDT Default On High Isolation CATV Switch
5 – 3000 MHz
Features
 75 Terminations RF1 / RF2
 Positive Voltage Control
 High Isolation: 90 dB @ 216 MHz
 Low Insertion Loss: 1.4 dB @ 2200 MHz
 Lead-Free 3 mm 16-Lead PQFN Package
 Halogen-Free “Green” Mold Compound
 RoHS* Compliant and 260°C Reflow Compatible
Functional Schematic**
Rev. V3
Description
The MASW-009101 is a single pole double throw
(SPDT) switch in a lead-free 3 mm 16-lead PQFN
package. It meets FCC 15.115 specification of 80 dB
isolation between RF1 and RF2 at 216 MHz during
powered and un-powered states. The default on
un-powered state provides a low insertion loss path
from RFC to RF1 while maintaining high isolation
between RF2 and RFC/RF1.
** Default On path shown
Pin Configuration 3
This device is ideally suited for applications where
low control voltage, high isolation, small size and low
cost are required.
Typical applications are to replace mechanical
relays in CATV and satellite systems. This part can
be used in all 75 systems operating up to 3 GHz.
The MASW-009101 is fabricated using a GaAs
pHEMT process. The process features full
passivation for performance and reliability.
Ordering Information 1,2
Part Number
MASW-009101-TR3000
Package
3000 piece reel
MASW-009101-001SMB
Sample Board
1. Reference Application Note M513 for reel size information.
2. All sample boards include 5 loose parts.
Pin No.
Pin Name
Description
1 N/C No Connection
2 N/C No Connection
3
RFC
RF Common Port
4 N/C No Connection
5 N/C No Connection
6 N/C No Connection
7 RF2
RF Port 2
8 GT2 RF Termination
9 N/C No Connection
10 V2 Control Voltage 2
11 V1 Control Voltage 1
12 N/C
No Connection
13 GT1
RF Termination
14 RF1
RF Port 1
15 N/C
No Connection
16 N/C
No Connection
17
PAD3
RF and DC Ground
3. The exposed pad centered on the package bottom must be
connected to RF and DC ground.
* Restrictions on Hazardous Substances, European Union Directive 2002/95/EC.
1
ADVANCED: Data Sheets contain information regarding a product M/A-COM is considering for
North America Tel: 800.366.2266 / Fax: 978.366.2266
development. Performance is based on target specifications, simulated results, and/or prototype
measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM has under develop-
ment. Performance is based on engineering tests. Specifications are typical. Mechanical outline has
Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
Visit www.macom.com for additional data sheets and product information.
been fixed. Engineering samples and/or test data may be available. Commitment to produce in
volume is not guaranteed.
M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
changes to the product(s) or information contained herein without notice.

1 page




MASW-009101 pdf
MASW-009101
SPDT Default On High Isolation CATV Switch
5 – 3000 MHz
Rev. V3
Typical Performance Curves: Powered State
Isolation, RF1 to RF2 (RFC to RF1 State)
0
Isolation, RF1 to RF2 (RFC to RF2 State)
0
-20
+25°C
-40°C
+85°C
-20
+25°C
-40°C
+85°C
-40 -40
-60 -60
-80 -80
-100
0.0
0.5 1.0 1.5
Frequency (GHz)
2.0
2.5
-100
0.0
0.5 1.0 1.5
Frequency (GHz)
2.0
2.5
Input Return Loss, RFC
0
Output Return Loss, RF1/RF2
0
-10 -10
-20 -20
-30
-40
0.0
+25°C
-40°C
+85°C
0.5 1.0 1.5
Frequency (GHz)
2.0
2.5
-30
-40
0.0
+25°C
-40°C
+85°C
0.5 1.0 1.5 2.0
Frequency (GHz)
2.5
5
ADVANCED: Data Sheets contain information regarding a product M/A-COM is considering for
North America Tel: 800.366.2266 / Fax: 978.366.2266
development. Performance is based on target specifications, simulated results, and/or prototype
measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM has under develop-
ment. Performance is based on engineering tests. Specifications are typical. Mechanical outline has
Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
Visit www.macom.com for additional data sheets and product information.
been fixed. Engineering samples and/or test data may be available. Commitment to produce in
volume is not guaranteed.
M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
changes to the product(s) or information contained herein without notice.

5 Page










PáginasTotal 7 Páginas
PDF Descargar[ Datasheet MASW-009101.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
MASW-009101SPDT Default On High Isolation CATV SwitchMA-COM
MA-COM

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar