|
|
PDF PE42720 Data sheet ( Hoja de datos )
| Número de pieza | PE42720 | |
| Descripción | SPDT RF Switch | |
| Fabricantes | Peregrine Semiconductor | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de PE42720 (archivo pdf) en la parte inferior de esta página. Total 11 Páginas | ||
|
No Preview Available !
Product Description
The PE42720 is a HaRP™ technology-enhanced
absorptive 75Ω SPDT RF switch developed on the
UltraCMOS® process technology.
PE42720 is a highly linear device delivering high
isolation and low insertion loss performance. It is
designed for CATV applications including CATV signal
switching and distribution, cable modem headend, and
DBS IF switching.
PE42720 supports +1.8V control logic and offers high
ESD protection. In addition, no blocking capacitors are
required if DC voltage is not present on the RF ports.
Peregrine’s HaRP™ technology enhancement is an
innovative feature of the UltraCMOS® process, offering
the performance of GaAs with the economy and
integration of conventional CMOS.
Product Specification
PE42720
UltraCMOS® SPDT RF Switch
5 – 3000 MHz
Features
HaRP™ technology enhanced
High linearity
CTB/CSO of -104 dBc
Supports +1.8V control logic
Low insertion loss
0.7 dB @ 1 GHz
0.8 dB @ 2 GHz
1.0 dB @ 3 GHz
High isolation
65 dB @ 1 GHz
64 dB @ 2 GHz
63 dB @ 3 GHz
High ESD performance
2500V HBM on all pins
500V CDM on all pins
Figure 1. Functional Diagram
Figure 2. Package Type
20-lead 4x4 mm LGA
DOC-35206
Document No. DOC-12514-2 │ www.psemi.com
©2010-2013 Peregrine Semiconductor Corp. All rights reserved.
Page 1 of 11
1 page  
PE42720
Product Specification
Typical Performance Data @ 25°C and VDD = 3.0V unless otherwise specified
Figure 4. Insertion Loss (RFC–RFX)
Figure 5. Insertion Loss vs. Temp (RFC–RFX)
Figure 6. Insertion Loss vs. VDD (RFC–RFX)
Figure 7. RFC Port Return Loss vs. Temp
(RF1 Active)
Figure 8. RFC Port Return Loss vs. VDD
(RF1 Active)
Document No. DOC-12514-2 │ www.psemi.com
©2010-2013 Peregrine Semiconductor Corp. All rights reserved.
Page 5 of 11
5 Page 
PE42720
Product Specification
Figure 23. Tape and Reel Drawing
Tape Feed Direction
Notes:
1. 10 sprocket hole pitch cumulative tolerance ±0.02
2. Camber not to exceed 1 mm in 100 mm
3. Material: PS + C
4. Ao and Bo measured as indicated
5. Ko measured from a plane on the inside bottom of
the pocket to the top surface of the carrier
6. Pocket position relative to sprocket hole measured as
true position of pocket, not pocket hole
Ao = 4.35 mm
Bo = 4.35 mm
Ko = 1.1 mm
Table 6. Ordering Information
Order Code
Description
PE42720LGBB-Z
PE42720 SPDT RF switch
EK42720-02
PE42720 Evaluation kit
Package
Green 20-lead 4x4 mm LGA
Evaluation kit
Shipping Method
3000 units/T&R
1/Box
Sales Contact and Information
For sales and contact information please visit www.psemi.com.
Advance Information: The product is in a formative or design stage. The datasheet contains design target
specifications for product development. Specifications and features may change in any manner without notice.
Preliminary Specification: The datasheet contains preliminary data. Additional data may be added at a later
date. Peregrine reserves the right to change specifications at any time without notice in order to supply the best
possible product. Product Specification: The datasheet contains final data. In the event Peregrine decides to
change the specifications, Peregrine will notify customers of the intended changes by issuing a CNF (Customer
Notification Form).
The information in this datasheet is believed to be reliable. However, Peregrine assumes no liability for the use
of this information. Use shall be entirely at the user’s own risk.
No patent rights or licenses to any circuits described in this datasheet are implied or granted to any third party.
Peregrine’s products are not designed or intended for use in devices or systems intended for surgical implant,
or in other applications intended to support or sustain life, or in any application in which the failure of the
Peregrine product could create a situation in which personal injury or death might occur. Peregrine assumes no
liability for damages, including consequential or incidental damages, arising out of the use of its products in
such applications.
The Peregrine name, logo, UltraCMOS and UTSi are registered trademarks and HaRP, MultiSwitch and DuNE
are trademarks of Peregrine Semiconductor Corp.
Document No. DOC-12514-2 │ www.psemi.com
©2010-2013 Peregrine Semiconductor Corp. All rights reserved.
Page 11 of 11
11 Page | ||
| Páginas | Total 11 Páginas | |
| PDF Descargar | [ Datasheet PE42720.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| PE4272 | SPDT Broadband UltraCMOS | Peregrine Semiconductor |
| PE42720 | SPDT RF Switch | Peregrine Semiconductor |
| PE42721 | SPDT RF Switch | Peregrine Semiconductor |
| PE42722 | SPDT RF Switch | Peregrine Semiconductor |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |