|
|
Numéro de référence | GP15A | ||
Description | Glass Passivated Junction Plastic Rectifiers | ||
Fabricant | Taiwan Semiconductor | ||
Logo | |||
1 Page
GP15A THRU GP15M
Features
1.5 AMPS. Glass Passivated Junction Plastic Rectifiers
Voltage Range
50 to 1000 Volts
Current
1.5 Amperes
DO-15
High temperature metallurgically bonded construction
Plastic material used carries Underwriters Laboratory
Classification 94V-O
Glass passivated cavity-free junction
Capable of meeting environmental standards of
MIL-S-19500
1.5 amperes operation at TA=55oC and with no thermal
runaway
Typical IR less than 0.1 uA
High temperature soldering guaranteed:
350oC / 10 seconds, 0.375”(9.5mm) lead length, 5 lbs.
(2.3kg) tension
Mechanical Data
Case: JEDEC DO-15 molded plastic over glass body
Lead: Plated axial leads, solderable per MIL-STD-
750, Method 2026
Polarity: Color band denotes cathode end
Mounting position: Any
Weight: 0.015 ounce, 0.4 gram
Dimensions in inches and (millimeters)
Maximum Ratings and Electrical Characteristics
Rating at 25℃ambient temperature unless otherwise specified.
Single phase, half wave, 60 Hz, resistive or inductive load.
For capacitive load, derate current by 20%
Type Number
Symbol GP GP GP GP GP
15A 15B 15D 15G 15J
Maximum Recurrent Peak Reverse Voltage VRRM 50 100 200 400 600
Maximum RMS Voltage
VRMS 35 70 140 280 420
Maximum DC Blocking Voltage
VDC 50 100 200 400 600
Maximum Average Forward Rectified
Current .375”(9.5mm) Lead Length at
TA=55℃
I(AV)
1.5
Peak Forward Surge Current, 8.3 ms Single
Half Sine-wave Superimposed on Rated
Load (JEDEC method )
IFSM
50
Maximum Instantaneous Forward Voltage
@1.5A
VF
1.1
Maximum Full Load Reverse Current, Full
Cycle Average .375”(9.5mm) Lead Length
@TA=55℃
HTIR
100
Maximum DC Reverse Current @ TA=25℃
at Rated DC Blocking Voltage @ TA=150℃
IR
5.0
200
Typical Reverse Recovery Time (Note 1)
Trr
2.0
Typical Junction Capacitance ( Note 2 )
Cj
15.0
Typical Thermal Resistance (Note 3)
RθJA
60
Operating and Storage Temperature Range
TJ,TSTG
- 65 to + 175
Notes: 1. Reverse Recovery Conditions: IF=0.5A, IR=1.0A, IRR=0.25A
2. Measured at 1 MHz and Applied Reverse Voltage of 4.0 Volts D.C.
3. Mount on Cu-Pad Size 10mm x 10mm on P.C.B..
- 568 -
GP GP Units
15K 15M
800 1000 V
560 700 V
800 1000 V
A
A
V
uA
uA
uA
uS
pF
℃/W
℃
|
|||
Pages | Pages 2 | ||
Télécharger | [ GP15A ] |
No | Description détaillée | Fabricant |
GP15 | 1.5 Amp Glass Passivated Junction Rectifiers 50 to 1000 Volts | Micro Commercial Components |
GP150 | Diode (spec sheet) | American Microsemiconductor |
GP1500 | (GP1xxx) High Voltage Diode Rectifiers | Diotec Electronics |
GP15A | SINTERED GLASS PASSIVATED JUNCTION RECTIFIER | Zowie Technology Corporation |
US18650VTC5A | Lithium-Ion Battery | Sony |
TSPC106 | PCI Bus Bridge Memory Controller | ATMEL |
TP9380 | NPN SILICON RF POWER TRANSISTOR | Advanced Semiconductor |
www.DataSheetWiki.com | 2020 | Contactez-nous | Recherche |