DataSheetWiki


VND7040AJ fiches techniques PDF

STMicroelectronics - Double channel high-side driver

Numéro de référence VND7040AJ
Description Double channel high-side driver
Fabricant STMicroelectronics 
Logo STMicroelectronics 





1 Page

No Preview Available !





VND7040AJ fiche technique
VND7040AJ
Double channel high-side driver with MultiSense analog
feedback for automotive applications
Datasheet - production data
Features
Max transient supply voltage
Operating voltage range
Typ. on-state resistance (per Ch)
Current limitation (typ)
Standby current (max)
VCC 40 V
VCC 4 to 28 V
RON 40
ILIMH 34 A
ISTBY 0.5 µA
Automotive qualified
General
Double channel smart high-side driver
with MultiSense analog feedback
Very low standby current
Compatible with 3 V and 5 V CMOS
outputs
MultiSense diagnostic functions
Multiplexed analog feedback of: load
current with high precision proportional
current mirror, VCC supply voltage and
TCHIP device temperature
Overload and short to ground (power
limitation) indication
Thermal shutdown indication
OFF-state open-load detection
Output short to VCC detection
Sense enable/disable
Protections
Undervoltage shutdown
Overvoltage clamp
Load current limitation
Self limiting of fast thermal transients
Configurable latch-off on
overtemperature or power limitation
with dedicated fault reset pin
Loss of ground and loss of VCC
Reverse battery with external
components
Electrostatic discharge protection
Applications
All types of Automotive resistive, inductive
and capacitive loads
Specially intended for automotive signal
lamps (up to P27W or SAE1156 and R5W
paralleled or LED rear combinations)
Description
The device is a double channel high-side driver
manufactured using ST proprietary VIPower® M0-
7 technology and housed in PowerSSO-16
package. The device is designed to drive 12 V
automotive grounded loads through a 3 V and
5 V CMOS-compatible interface, providing
protection and diagnostics.
The device integrates advanced protective
functions such as load current limitation, overload
active management by power limitation and
overtemperature shutdown with configurable
latch-off.
A FaultRST pin unlatches the output in case of
fault or disables the latch-off functionality.
A dedicated multifunction multiplexed analog
output pin delivers sophisticated diagnostic
functions including high precision proportional
load current sense, supply voltage feedback and
chip temperature sense, in addition to the
detection of overload and short circuit to ground,
short to VCC and OFF-state open-load.
A sense enable pin allows OFF-state diagnosis to
be disabled during the module low-power mode
as well as external sense resistor sharing among
similar devices.
May 2015
DocID027395 Rev 1
This is information on a product in full production.
1/46
www.st.com

PagesPages 30
Télécharger [ VND7040AJ ]


Fiche technique recommandé

No Description détaillée Fabricant
VND7040AJ Double channel high-side driver STMicroelectronics
STMicroelectronics
VND7040AJ-E Double channel high-side driver STMicroelectronics
STMicroelectronics

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche