DataSheetWiki


VND5004DSP30 fiches techniques PDF

STMicroelectronics - high-side driver

Numéro de référence VND5004DSP30
Description high-side driver
Fabricant STMicroelectronics 
Logo STMicroelectronics 





1 Page

No Preview Available !





VND5004DSP30 fiche technique
VND5004DSP30
Double 4mhigh-side driver with analog CurrentSense for
automotive applications
Datasheet - production data
Features
0XOWL3RZHU6
*$3*&)7
– Reverse battery protection with self switch
on of the Power MOSFET
– Electrostatic discharge protection
application
All types of resistive, inductive and capacitive
loads
Suitable for power management applications
Max transient supply voltage
Operating voltage range
Max on-state resistance
Current limitation (typ)
Off-state supply current
VCC
VCC
RON
ILIMH
IS
1. Typical value with all loads connected.
41 V
4.5 to 28 V
4 mΩ
100 A
2 µA(1)
Automotive qualified
General
– Inrush current active management by
power limitation
– Very low standby current
– 3.0 V CMOS compatible input
– Optimized electromagnetic emission
– Very low electromagnetic susceptibility
– In compliance with the 2002/95/EC
European directive
Diagnostic functions
– Proportional load current sense
– Current sense disable
– Thermal shutdown indication
Protection
– Undervoltage shutdown
– Overvoltage clamp
– Load current limitation
– Thermal shutdown
– Self limiting of fast thermal transients
– Protection against loss of ground and loss
of VCC
Description
The device is a double channel high-side driver
manufactured using STMicroelectronics
proprietary VIPower® M0-5 technology. It is
intended for driving resistive or inductive loads
with one side connected to ground.
Active VCC pin voltage clamp and load dump
protection circuit protect the device against
transients on the VCC pin. The device integrates
an analog current sense which delivers a current
proportional to the load current (according to a
known ratio) when CS_DIS is driven low or left
open. When CS_DIS is driven high, the
CURRENT SENSE pin is high impedance.
Output current limitation protects the device in
overload condition. In case of long duration
overload, the device limits the dissipated power to
a safe level up to thermal shutdown intervention.
Thermal shutdown with automatic restart allows
the device to recover normal operation as soon as
a fault condition disappears.
November 2015
This is information on a product in full production.
DocID027939 Rev 2
1/28
www.st.com

PagesPages 28
Télécharger [ VND5004DSP30 ]


Fiche technique recommandé

No Description détaillée Fabricant
VND5004DSP30 high-side driver STMicroelectronics
STMicroelectronics

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche