DataSheetWiki


MADP-042505-13060 fiches techniques PDF

MA-COM - PIN Diodes

Numéro de référence MADP-042505-13060
Description PIN Diodes
Fabricant MA-COM 
Logo MA-COM 





1 Page

No Preview Available !





MADP-042505-13060 fiche technique
MADP-042XX5-13060 Series
SURMOUNTTM PIN Diodes:
RoHS
Rev. V6
Features
 Surface Mount
 No Wirebonds Required
 Rugged Silicon-Glass Construction
 Silicon Nitride Passivation
 Polymer Scratch Protection
 Low Parasitic Capacitance and Inductance
 High Average and Peak Power Handling
 RoHS Compliant
Description
This device is a silicon, glass PIN diode surmount chip
fabricated with M/A-COM Tech’s patented HMICTM proc-
ess. This device features two silicon pedestals embedded
in a low loss, low dispersion glass. The diode is formed on
the top of one pedestal and connections to the backside of
the device are facilitated by making the pedestal sidewalls
electrically conductive. Selective backside metallization is
applied producing a surface mount device. This vertical
topology provides for exceptional heat transfer. The
topside is fully encapsulated with silicon nitride and has an
additional polymer layer for scratch and impact protection.
These protective coatings prevent damage to the junction
and the anode air-bridge during handling and assembly.
DE
G
F
Applications
These packageless devices are suitable for moderate
incident power applications, 10W/C.W. or where the
peak power is 50W, pulse width is 1μS, and duty cycle
is 0.01%. Their low parasitic inductance, 0.4 nH, and
excellent RC constant, make these devices a superior
choice for higher frequency switch elements when
compared to their plastic package counterparts.
Absolute Maximum Ratings1@ TAMB = +25°C
(unless otherwise specified)
Parameter
Absolute Maximum
MADP-042…-13060 305 405 505 905
C.W. Incident Power dBm 40 44 43 35
Forward Current
Reverse Voltage
Operating Temperature
250 mA
-80 V
-55°C to +125°C
Storage Temperature
Junction Temperature
-55°C to +150°C
+175°C
Mounting Temperature
+280°C for 10 seconds
DIM
A
B
C
D
E
F
G
INCHES
MIN
0.040
0.021
0.004
0.013
0.011
0.013
MAX
0.042
0.023
0.008
0.015
0.013
0.015
0.019
0.021
MM
MIN
1.025
0.525
0.102
0.325
0.275
0.325
MAX
1.075
0.575
0.203
0.375
0.325
0.375
0.475
0.525
Notes:
1. Backside metal: 0.1 μM thick.
2. Yellow hatched areas indicate backside ohmic gold contacts.
3. All devices have the same outline dimensions ( A to G).
1. Exceeding these limits may cause permanent damage.
1
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions North America Tel: 800.366.2266 / Fax: 978.366.2266
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
Visit www.macomtech.com for additional data sheets and product information.
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available.
Commitment to produce in volume is not guaranteed.
M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
changes to the product(s) or information contained herein without notice.

PagesPages 4
Télécharger [ MADP-042505-13060 ]


Fiche technique recommandé

No Description détaillée Fabricant
MADP-042505-13060 PIN Diodes MA-COM
MA-COM

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche