DataSheet.es    


PDF L9779WD Data sheet ( Hoja de datos )

Número de pieza L9779WD
Descripción Multifunction IC
Fabricantes STMicroelectronics 
Logotipo STMicroelectronics Logotipo



Hay una vista previa y un enlace de descarga de L9779WD (archivo pdf) en la parte inferior de esta página.


Total 30 Páginas

No Preview Available ! L9779WD Hoja de datos, Descripción, Manual

L9779WD
Multifunction IC for engine management system
Datasheet - production data
*$3*36
HiQUAD-64
Features
5 V logic regulator
3.3 V logic regulator
5 V tracking sensor supply
Smart reset function
Power latch with Secure Engine Off (SEO)
functionality, to safely complete driver switch
off procedure
Flying wheel interface function (VRS) with
adaptive time and amplitude control
Protected low-side relay driver
– OUT13 to 18, MRD
Protected low-side (injector drivers)
– OUT1 to 4
Protected low-side (high current)
– OUT5, 6, 7
Protected low-side (low current)
– OUT19, 20
IGBT pre-drivers (IGN1 to 4)
External MOS pre-drivers (OUT8 to 9)
Configurable power stages CPS
– Stepper motor driver/ high-side - low-side
(OUT21 to 28)
Thermal warning and shutdown
Serial interface
– Micro Second Channel interface (MSC)
– ISO9141 interface (K-Line)
High speed CAN transceiver
Dedicated pin VDDIO to select the voltage
level of digital output used for serial
communication
VDA 2.0 compliance with 3 level Watchdog
Package: HiQUAD-64
Description
The L9779WD is an integrated circuit designed
for automotive environment and implemented in
BCD6S technology.
It is conceived to provide all basic functions for
standard engine management control units.
It is assembled in the HiQUAD-64 power
package.
Order code
L9779WD
L9779WD-TR
Table 1. Device summary
Package
HiQUAD-64
HiQUAD-64
Packing
Tray
Tape and Reel
September 2015
This is information on a product in full production.
DocID027452 Rev 5
1/170
www.st.com

1 page




L9779WD pdf
L9779WD
List of tables
List of tables
Table 1.
Table 2.
Table 3.
Table 4.
Table 5.
Table 6.
Table 7.
Table 8.
Table 9.
Table 10.
Table 11.
Table 12.
Table 13.
Table 14.
Table 15.
Table 16.
Table 17.
Table 18.
Table 19.
Table 20.
Table 21.
Table 22.
Table 23.
Table 24.
Table 25.
Table 26.
Table 27.
Table 28.
Table 29.
Table 30.
Table 31.
Table 32.
Table 33.
Table 34.
Table 35.
Table 36.
Table 37.
Table 38.
Table 39.
Table 40.
Table 41.
Table 42.
Table 43.
Table 44.
Device summary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Pins description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Absolute maximum ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
ESD protection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Temperature ranges and thermal data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Operating range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
KEY_ON pin electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
VDD_IO electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Internal reset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
RST pin external components required . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
RST pin electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Temperature information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Voltage regulators external components required . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
VB Power supply electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Linear 5 V regulator electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Linear 3.3 V regulator electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
5V tracking sensor supply electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Main relay driver electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
LSa electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
LSa diagnosis electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
LSa diagnosis electrical characteristics (OUT 5) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
LSb electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
LSb diagnosis electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
LSc electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
LSc diagnosis electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
LSd electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
LSd diagnosis electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
Fault encoding condition . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68
Ignition pre-drivers electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
External MOSFET gate pre-drivers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
Configuration of the stepper motor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
H-bridge1 configurable power stages OUT [21 to 24] . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78
H-bridge2 configurable power stages OUT [25 to 28] . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79
Stepper configuration electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84
Electrical and diagnosis characteristics of [OUT22], [OUT24], [OUT27], [OUT28]
when configured as single power stages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87
Electrical characteristics of [OUT22], [OUT24], [OUT27], [OUT28] when configured
as single power stages connected in parallel (For information only) . . . . . . . . . . . . . . . . . 88
Electrical characteristics of [OUT21], [OUT23], [OUT25], [OUT26] when configured
as single power stages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89
Diagnosis characteristic of [OUT21], [OUT23], [OUT25], [OUT26] when configured
as single power stages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89
CPS table single mode parallelism . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90
CPS table combined mode parallelism . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90
ISO serial line (K-LINE) functionality electrical characteristics . . . . . . . . . . . . . . . . . . . . . . 92
CAN transceiver electrical characteristics. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96
CAN transceiver timing characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98
Pick voltage detector precision . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102
DocID027452 Rev 5
5/170
6

5 Page





L9779WD arduino
L9779WD
Detailed features description
– 1 x Thermal Shutdown (Tj > 175 °C = Tsd) if Tj > Tsd: V3V3 is turned off.
There are 5 temperature sensors for OT2 (OUT1..10, OUT13…20, OUT21…28, IGN1…4
are turned off) in different Layout position, they are logically “AND” in case of thermal
shutdown.
ISO9141 interface
– ISO9141 serial interface (K-Line)
CAN transceiver
The CAN bus transceiver allows the connection of the microcontroller, with CAN
controller unit, to a high speed CAN bus with transmission rates up to 1Mbit/s for
exchange of data with other ECUs.
DocID027452 Rev 5
11/170
169

11 Page







PáginasTotal 30 Páginas
PDF Descargar[ Datasheet L9779WD.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
L9779WDMultifunction ICSTMicroelectronics
STMicroelectronics

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar