00applications
cellular phones
picture phones
toys
PC multimedia
digital still cameras
00features
high sensitivity for low-light operation
ultra low power and low cost
automatic image control functions: automatic
exposure control (AEC), automatic gain control
(AGC), automatic white balance (AWB), automatic
band filter (ABF), automatic black level calibration
(ABLC)
programmable controls: frame rate, AEC/AGC
16-zone size/position/weight control, mirror, flip,
cropping, and windowing
image quality controls: lens correction and defective
pixel canceling
00key specifications
active array size: 1280 x 800
power supply:
analog: 3.0 ~ 3.6V
core: 1.5VDC + 5% (built-in regulator)
I/O: 1.7 ~ 3.6V
power requirements:
active: 110 mW
standby: 50 µA
temperature range:
operating: -30°C to 70°C (see table 8-1)
stable image: 0°C to 50°C (see table 8-1)
output formats (10-bit): raw RGB data
lens size: 1/4"
lens chief ray angle: 25° non-linear (see
figure 10-2)
input clock frequency: 6 ~ 27 MHz
ordering information
OV09712-V28A (color, lead-free)
28-pin CSP2
output support for raw RGB
supports image sizes: WXGA (1280x800) and
640x400
support for horizontal and vertical sub-sampling
support for black sun cancellation
standard serial camera control bus (SCCB) interface
digital video port (DVP) parallel output interface
embedded one-time programmable (OTP) memory
on-chip phase lock loop (PLL)
built-in 1.5V regulator for core
scan mode: progressive
maximum image transfer rate:
WXGA (1280x800): 30 fps
640x400: 60 fps
sensitivity: 3300 mV/(Lux • sec)
S/N ratio: 39 dB
dynamic range: 69 dB
maximum exposure interval: 826 x tROW
pixel size: 3 µm x 3 µm
dark current: 20 mV/sec @ 60°C
well capacity: 13 Ke-
fixed pattern noise (FPN): 1% of VPEAK-TO-PEAK
image area: 3888 µm x 2430 µm
package dimensions: 5415 µm x 4415 µm
02.17.2009
PRODUCT SPECIFICATION
proprietary to OmniVision Technologies
iii
00list of tables
table 1-1 signal descriptions
table 2-1 driving capability and direction control for I/O pins
table 4-1 mirror and flip function control
table 4-2 test pattern selection control
table 4-3 AEC/AGC control functions
table 4-4 AEC control functions
table 4-5 average-based algorithm functions
table 4-6 histogram-based AEC algorithm adjustment controls
table 4-7 histogram-based AEC/AGC reference area option
table 4-8 BLC control functions
table 4-9 digital gain control functions
table 5-1 ISP top registers
table 5-2 pre-DSP registers
table 5-3 LENC gain COEF registers
table 5-4 LENC registers
table 5-5 white balance function related registers
table 5-6 WBC registers
table 5-7 SMPH registers
table 5-8 YAVG registers
table 5-9 system control registers
table 6-1 DVP timing specifications
table 6-2 DVP control registers
table 7-1 system control registers
table 7-2 DSP control registers
table 8-1 absolute maximum ratings
table 8-2 DC characteristics (-30°C < TA < 70°C)
table 8-3 AC characteristics (TA = 25°C, VDD-A = 2.8V)
table 8-4 timing characteristics
table 9-1 package dimensions
table 9-2 reflow conditions
table 10-1 CRA versus image height plot
1-1
2-4
4-1
4-2
4-3
4-5
4-6
4-7
4-10
4-11
4-12
5-1
5-1
5-3
5-5
5-7
5-9
5-9
5-10
5-11
6-3
6-4
7-1
7-13
8-1
8-2
8-3
8-3
9-1
9-3
10-2
02.17.2009
PRODUCT SPECIFICATION
proprietary to OmniVision Technologies
ix