DataSheetWiki


NX3L2267S fiches techniques PDF

NXP Semiconductors - Low-ohmic dual single-pole double-throw analog switch

Numéro de référence NX3L2267S
Description Low-ohmic dual single-pole double-throw analog switch
Fabricant NXP Semiconductors 
Logo NXP Semiconductors 





1 Page

No Preview Available !





NX3L2267S fiche technique
NX3L2267S
Low-ohmic dual single-pole double-throw analog switch
Rev. 2 — 8 November 2011
Product data sheet
1. General description
The NX3L2267S is a dual low-ohmic single-pole double-throw analog switch suitable for
use as an analog or digital 2 : 1 multiplexer/demultiplexer. Each switch has a digital select
input (nS), two independent inputs/outputs (nY0 and nY1) and a common input/output
(nZ).
The NX3L2267S includes termination resistors that improve noise immunity during
overshoot excursions, off-isolation coupling, or pop-minimization.
Schmitt trigger action at the digital inputs makes the circuit tolerant to slower input rise and
fall times. Low threshold digital inputs allows this device to be driven by 1.8 V logic levels
in 3.3 V applications without significant increase in supply current ICC. This makes it
possible for the NX3L2267S to switch 4.3 V signals with a 1.8 V digital controller,
eliminating the need for logic level translation. The NX3L2267S allows signals with
amplitude up to VCC to be transmitted from nZ to nY0 or nY1, or from nY0 or nY1 to nZ. Its
low ON resistance (0.5 ) and flatness (0.13 ) ensures minimal attenuation and
distortion of transmitted signals.
2. Features and benefits
Wide supply voltage range from 1.4 V to 4.3 V
Very low ON resistance (peak):
1.65 (typical) at VCC = 1.4 V
0.95 (typical) at VCC = 1.65 V
0.55 (typical) at VCC = 2.3 V
0.50 (typical) at VCC = 2.7 V
0.50 (typical) at VCC = 4.3 V
Break-before-make switching
High noise immunity
ESD protection:
HBM JESD22-A114F Class 3A exceeds 7500 V
MM JESD22-A115-A exceeds 200 V
CDM AEC-Q100-011 revision B exceeds 1000 V
CMOS low-power consumption
Latch-up performance exceeds 100 mA per JESD78B Class II Level A
1.8 V control logic at VCC = 3.6 V
Control input accepts voltages above supply voltage
Very low supply current, even when input is below VCC
High current handling capability (350 mA continuous current under 3.3 V supply)

PagesPages 20
Télécharger [ NX3L2267S ]


Fiche technique recommandé

No Description détaillée Fabricant
NX3L2267 Low-ohmic dual single-pole double-throw analog switch NXP Semiconductors
NXP Semiconductors
NX3L2267S Low-ohmic dual single-pole double-throw analog switch NXP Semiconductors
NXP Semiconductors

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche