|
|
PDF HMC1160 Data sheet ( Hoja de datos )
| Número de pieza | HMC1160 | |
| Descripción | MMIC VCO | |
| Fabricantes | Analog Devices | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de HMC1160 (archivo pdf) en la parte inferior de esta página. Total 10 Páginas | ||
|
No Preview Available !
Data Sheet
MMIC VCO with Half Frequency Output,
8.45 GHz to 9.30 GHz
HMC1160
FEATURES
Dual output: fO = 8.45 GHz to 9.3 GHz
fO/2 = 4.225 GHz to 4.65 GHz
POUT: 12 dBm
Phase noise: −116 dBc/Hz at 100 kHz
No external resonator needed
RoHS compliant, 5 mm × 5 mm SMT package: 25 mm²
APPLICATIONS
Point to point and multipoint radio
Test equipment and industrial controls
VSAT
GENERAL DESCRIPTION
The HMC1160 is a MMIC voltage controlled oscillator that
integrates a resonator, a negative resistance device, and a
varactor diode, and features a half frequency output.
Because of the monolithic construction of the oscillator, output
power and phase noise performance are excellent over
temperature.
FUNCTIONAL BLOCK DIAGRAM
32 31 30 29 28 27 26 25
NC 1
NC 2
NC 3
NC 4
GND 5
NC 6
NC 7
NC 8
24 NC
23 NC
22 NC
21 VCC
20 NC
19 RFOUT
18 NC
17 NC
9 10 11 12 13 14 15 16
Figure 1.
PACKAGE
BASE
GND
Power output is 12 dBm typical from a 5 V supply voltage. The
voltage controlled oscillator is housed in a RoHS compliant
SMT package and requires no external matching components.
Rev. A
Document Feedback
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibilityisassumedbyAnalogDevicesforitsuse,norforanyinfringementsofpatentsorother
rights of thirdpartiesthatmay result fromits use. Specifications subject tochangewithout notice.
No license is granted by implication or otherwise under any patent or patent rights of Analog
Devices.Trademarks and registered trademarks are the property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700 ©2014–2015 Analog Devices, Inc. All rights reserved.
Technical Support
www.analog.com
1 page  
Data Sheet
PIN CONFIGURATION AND FUNCTION DESCRIPTIONS
HMC1160
32 31 30 29 28 27 26 25
NC 1
NC 2
NC 3
NC 4
GND 5
NC 6
NC 7
NC 8
HMC1160
TOP VIEW
(Not to Scale)
24 NC
23 NC
22 NC
21 VCC
20 NC
19 RFOUT
18 NC
17 NC
9 10 11 12 13 14 15 16
NOTES
1. NC = NO CONNECT. HOWEVER, THESE PINS MAY BE
CONNECTED TO RF/DC GROUND WITHOUT AFFECTING
THE PERFORMANCE OF THE DEVICE.
2. THE EXPOSED PAD MUST BE CONNECTED TO RF/DC GROUND.
Figure 2. Pin Configuration
Table 3. Pin Function Descriptions
Pin No.
Mnemonic
1 to 4, 6 to 10, 13 to 18, 20, 22 to NC
28, 30 to 32
12 RFOUT/2
19 RFOUT
21 VCC
29 VTUNE
5, 11 GND
EP
Description
No Connect. However, these pins can be connected to RF/dc ground without affecting
the performance of the device.
Half Frequency Output. This pin is ac-coupled.
RF Output. This pin is ac-coupled.
Supply Voltage (5 V).
Control Voltage and Modulation Input. The modulation bandwidth is dependent on
the drive source impedance.
Ground. These pins must be connected to RF/dc ground.
Exposed Paddle. The package bottom has an exposed metal paddle that must be
connected to RF/dc ground.
Rev. A | Page 5 of 10
5 Page | ||
| Páginas | Total 10 Páginas | |
| PDF Descargar | [ Datasheet HMC1160.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| HMC1160 | MMIC VCO | Analog Devices |
| HMC1161 | 8.71 GHz to 9.55 GHz MMIC VCO | Analog Devices |
| HMC1162 | 9.25GHz to 10.10GHz MMIC VCO | Analog Devices |
| HMC1163 | 9.65 GHz to 10.41 GHz MMIC VCO | Analog Devices |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |