|
|
PDF SA616 Data sheet ( Hoja de datos )
| Número de pieza | SA616 | |
| Descripción | Low-voltage high performance mixer FM IF system | |
| Fabricantes | NXP Semiconductors | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de SA616 (archivo pdf) en la parte inferior de esta página. Total 30 Páginas | ||
|
No Preview Available !
SA616
Low-voltage high performance mixer FM IF system
Rev. 5 — 24 July 2012
Product data sheet
1. General description
The SA616 is a low-voltage high performance monolithic FM IF system incorporating a
mixer/oscillator, two limiting intermediate frequency amplifiers, quadrature detector,
logarithmic Received Signal Strength Indicator (RSSI), voltage regulator and audio and
RSSI op amps. The SA616 is available in SSOP20 and HVQFN20 packages.
The SA616 was designed for portable communication applications and will function down
to 2.7 V. The RF section is similar to the famous SA615. The audio and RSSI outputs
have amplifiers with access to the feedback path. This enables the designer to adjust the
output levels or add filtering.
2. Features and benefits
Low power consumption: 3.5 mA typical at 3 V
Mixer input to >150 MHz
Mixer conversion power gain of 17 dB at 45 MHz
XTAL oscillator effective to 150 MHz (LC oscillator or external oscillator can be used at
higher frequencies)
102 dB of IF amp/limiter gain
2 MHz IF amp/limiter small signal bandwidth
Temperature compensated logarithmic RSSI with a 80 dB dynamic range
Low external component count; suitable for crystal/ceramic/LC filters
Excellent sensitivity: 0.31 V into 50 matching network for 12 dB SINAD
(Signal-to-Noise-and-Distortion ratio) for 1 kHz tone with RF at 45 MHz and IF at
455 kHz
SA616 meets cellular radio specifications
Audio output internal op amp
RSSI output internal op amp
Internal op amps with rail-to-rail outputs
ESD protection exceeds 2000 V HBM per JESD22-A114 and 1000 V CDM per
JESD22-C101
Latch-up testing is done to JEDEC Standard JESD78 Class II, Level B
3. Applications
Portable cellular radio FM IF
Cordless phones
Wireless systems
RF level meter
1 page  
NXP Semiconductors
SA616
Low-voltage high performance mixer FM IF system
7. Functional description
The SA616 is an IF signal processing system suitable for second IF systems with input
frequency as high as 150 MHz. The bandwidth of the IF amplifier and limiter is at least
2 MHz with 90 dB of gain. The gain/bandwidth distribution is optimized for 455 kHz,
1.5 k source applications. The overall system is well-suited to battery operation as well
as high performance and high quality products of all types.
The input stage is a Gilbert cell mixer with oscillator. Typical mixer characteristics include
a noise figure of 6.2 dB, conversion gain of 17 dB, and input third-order intercept of
9 dBm. The oscillator will operate in excess of 200 MHz in L/C tank configurations.
Hartley or Colpitts circuits can be used up to 100 MHz for crystal configurations. Butler
oscillators are recommended for crystal configurations up to 150 MHz.
The output impedance of the mixer is a 1.5 k resistor permitting direct connection to a
455 kHz ceramic filter. The input resistance of the limiting IF amplifiers is also 1.5 k. With
most 455 kHz ceramic filters and many crystal filters, no impedance matching network is
necessary. The IF amplifier has 43 dB of gain and 5.5 MHz bandwidth. The IF limiter has
60 dB of gain and 4.5 MHz bandwidth.
To achieve optimum linearity of the log signal strength indicator, there must be a 12 dBV
insertion loss between the first and second IF stages. If the IF filter or interstage network
does not cause 12 dBV insertion loss, a fixed or variable resistor or an L pad for
simultaneous loss and impedance matching can be added between the first IF output
(IF_AMP_OUT) and the interstage network. The overall gain will then be 90 dB with
2 MHz bandwidth.
The signal from the second limiting amplifier goes to a Gilbert cell quadrature detector.
One port of the Gilbert cell is internally driven by the IF. The other output of the IF is
AC-coupled to a tuned quadrature network. This signal, which now has a 90 phase
relationship to the internal signal, drives the other port of the multiplier cell.
The demodulated output of the quadrature drives an internal op amp. This op amp can be
configured as a unity gain buffer, or for simultaneous gain, filtering, and second-order
temperature compensation if needed. It can drive an AC load as low as 5 k with a
rail-to-rail output.
A log signal strength completes the circuitry. The output range is greater than 90 dB and is
temperature compensated. This log signal strength indicator exceeds the criteria for
AMPS or TACS cellular telephone. This signal drives an internal op amp. The op amp is
capable of rail-to-rail output. It can be used for gain, filtering, or second-order temperature
compensation of the RSSI, if needed.
Remark: dBV = 20log VO/VI.
SA616
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 5 — 24 July 2012
© NXP B.V. 2012. All rights reserved.
5 of 31
5 Page 
NXP Semiconductors
SA616
Low-voltage high performance mixer FM IF system
5
relative level
(dB)
−5
audio
002aaf415
−15
−25
AM rejection
−35
−45 THD+N
−55
−65
−125
−105
noise
−85 −65
−45 −25
RF level (dBm)
Fig 9.
VCC = 3 V; RF = 45 MHz; deviation = 8 kHz; Vo(aud)RMS = 104.9 mV.
Relative level of audio, AM rejection, THD+N and noise versus RF level
(Tamb = 40 C)
5
relative level
(dB)
−5
audio
002aaf416
−15
−25
AM rejection
−35
−45
−55
−65
−125
−105
noise
−85
−65
THD+N
−45 −25
RF level (dBm)
VCC = 3 V; RF = 45 MHz; deviation = 8 kHz; Vo(aud)RMS = 117.6 mV.
Fig 10. Relative level of audio, AM rejection, THD+N and noise versus RF level
(Tamb = +25 C)
SA616
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 5 — 24 July 2012
© NXP B.V. 2012. All rights reserved.
11 of 31
11 Page | ||
| Páginas | Total 30 Páginas | |
| PDF Descargar | [ Datasheet SA616.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| SA611 | 1GHz low voltage LNA and mixer |  Philips |
| SA612 | Double-balanced mixer and oscillator | Philips |
| SA612A | Double-balanced mixer and oscillator | NXP Semiconductors |
| SA614A | Low power FM IF system | Philips |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |