|
|
PDF PAM8008 Data sheet ( Hoja de datos )
| Número de pieza | PAM8008 | |
| Descripción | 3W STEREO CLASS-D | |
| Fabricantes | Diodes | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de PAM8008 (archivo pdf) en la parte inferior de esta página. Total 14 Páginas | ||
|
No Preview Available !
A Product Line of
Diodes Incorporated
PAM8008
3W STEREO CLASS-D with DC VOLUME,
POWER LIMIT and ANTI-SATURATION
Description
The PAM8008 is a 3W, Class-D audio amplifier. Advanced 64-step
DC volume control minimizes external components and allows
speaker volume control.
Integrated power limit technology which suppress the output signal
clip automatically due to the over level input signal. It offers low
THD+N and protect speaker.
Integrated anti-saturation technology which suppress the output
signal clip automatically when supply voltage changes. It offers low
THD+N, to produce high-quality sound reproduction.
PAM8008 has an additional noise reduction circuit which achieves
6dB noise attenuation. This circuit may help eliminate external
filtering, thereby saving the board space and components cost.
The PAM8008 features SCP (short circuit protection), OTP and
thermal shutdown.
The PAM8008 is available in SOP-16L package.
Features
• 3W Output at 10% THD with a 4 Load and 5V Power Supply
• 2.4W Output at 1% THD with a 4 Load and 5V Power Supply
• Filterless, Low Quiescent Current and Low EMI
• Low THD+N
• Power Limit Function to Protect Speaker when Occuring Large
Input
• 64-Step DC Volume Control from -80dB to +20dB
• 6dB Effective Noise Reduction
• Superior Low Noise: 60µV
• Minimize Pop/Clip Noise
• High Efficiency Up to 90%
• Auto Recovery Short Circuit Protection
• Thermal Shutdown
• Pb-Free Package
Pin Assignments
Applications
• LCD Monitors / TV Projectors
• Notebook/All-In-One Computers
• Portable Speakers
• Portable DVD Players, Game Machines
PAM8008
Document number: DSxxxxx Rev. 1 - 0
1 of 14
www.diodes.com
October 2012
© Diodes Incorporated
1 page  
A Product Line of
Diodes Incorporated
PAM8008
Typical Performance Characteristics (@TA = +25°C, VDD = 5V, GV = 20dB, RL = 8Ω, unless otherwise specified.)
PAM8008
Document number: DSxxxxx Rev. 1 - 0
5 of 14
www.diodes.com
October 2012
© Diodes Incorporated
5 Page 
A Product Line of
Diodes Incorporated
PAM8008
Application Information (cont.)
How to Reduce EMI (Electro Magnetic Interference) (cont.)
Most applications required a ferrite bead filter as shown at Figure 1. The ferrite filter reduces EMI around 1MHz and higher. When selecting a
ferrite bead, choose one with high impedance at high frequencies, and low impedance at low frequencies (MH2012HM221-T).
Figure 1: Ferrite Bead Filter to Reduce EMI
PCB Layout Guidelines Grounding
At this stage it is paramount to notice the necessity of separate grounds. Noise currents in the output power stage need to be returned to output
noise ground and nowhere else. Were these currents to circulate elsewhere, they may get into the power supply, the signal ground, etc, worse
yet, they may form a loop and radiate noise. Any of these cases results in degraded amplifier performance. The logical returns for the output
noise currents associated with Class-D switching are the respective GND pins for each channel. The switch state diagram illustrates that GND is
instrumental in nearly every switch state. This is the perfect point to which the output noise ground trace should return. Also note that output
noise ground is channel specific. A two channel amplifier has two seperate channels and consequently must have two seperate output noise
ground traces. The layout of the PAM8008 offers separate GND connections for each channel and in some cases each side of the bridge.
Output noise grounds must be tied to system ground at the power in exclusively. Signal currents for the inputs, reference, etc need to be
returned to quite ground. This ground is only tied to the signal components and the GND pin, and GND then tied to system ground.
Test Setup for Performance Testing (Class D)
1. When the PAM8008 works with LC filters, it should be connected with the speaker before it's powered on, otherwise it will be damaged easily.
2. When the PAM8008 works without LC filters, it's better to add a ferrite chip bead at the outgoing line of speaker for suppressing the possible
electromagnetic interference.
3. The absolute maximum rating of the PAM8008 operation voltage is 6.0V. When the PAM8008 is powered with four battery cells, it should be
noted that the voltage of four new dry or alkaline batteries is over 6V, higher than its maximum operation voltage, which probably make the
device damaged. Therefore, it's recommended to use either four Ni-MH (Nickel Metal Hydride) rechargeable batteries or three dry or alkaline
batteries.
4. The input signal should not be too high, if too high, it will cause the clipping of output signal when increasing the volume. Because the DC
volume control of the PAM8008 has big gain, it will make the device damaged.
5. When testing the PAM8008 without LC filters b y using resistor instead of speaker as the output load, the test results, e.g. THD or efficiency,
will be worse than those using speaker as load.
Notes:
1. The AP AUX-0025 low pass filter is necessary for class-D amplifier measurement with AP analyzer.
2. Two 22μH inductors are used in series with load resistor to emulate the small speaker for efficiency measurement.
PAM8008
Document number: DSxxxxx Rev. 1 - 0
11 of 14
www.diodes.com
October 2012
© Diodes Incorporated
11 Page | ||
| Páginas | Total 14 Páginas | |
| PDF Descargar | [ Datasheet PAM8008.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| PAM8001 | ANTI-SATURATION FILTERLESS 2W CLASS-D STEREO AMPLIFIER | Diodes |
| PAM8002 | 3W Filterless Mono Class D Audio Power Amplifier |  Power Analog Microelectronics |
| PAM8003 | FILTERLESS 2.5W CLASS-D STEREO AUDIO AMPLIFIER | Diodes |
| PAM8004 | FILTERLESS 3W CLASS-D STEREO AUDIO AMPLIFIER | Diodes |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |