DataSheetWiki


X9111 fiches techniques PDF

Intersil - Single Digitally Controlled Potentiometer

Numéro de référence X9111
Description Single Digitally Controlled Potentiometer
Fabricant Intersil 
Logo Intersil 





1 Page

No Preview Available !





X9111 fiche technique
®
Data Sheet
X9111
Single Supply/Low Power/1024-Tap/SPI Bus
September 15, 2006
FN8159.4
Single Digitally-Controlled (XDCP™)
Potentiometer
The X9111 integrates a single digitally controlled
potentiometer (XDCP) on a monolithic CMOS integrated
circuit.
The digital controlled potentiometer is implemented using
1023 resistive elements in a series array. Between each
element are tap points connected to the wiper terminal
through switches. The position of the wiper on the array is
controlled by the user through the SPI bus interface. The
potentiometer has associated with it a volatile Wiper Counter
Register (WCR) and four non-volatile Data Registers that
can be directly written to and read by the user. The contents
of the WCR controls the position of the wiper on the resistor
array though the switches. Powerup recalls the contents of
the default data register (DR0) to the WCR.
The XDCP can be used as a three-terminal potentiometer or
as a two terminal variable resistor in a wide variety of
applications including control, parameter adjustments, and
signal processing.
Functional Diagram
VCC
Features
• 1024 Resistor Taps – 10-Bit Resolution
• SPI Serial Interface for Write, Read, And Transfer
Operations Of The Potentiometer
• Wiper Resistance, 40Typical @ 5V
• Four Non-Volatile Data Registers
• Non-Volatile Storage of Multiple Wiper Positions
• Power On Recall. Loads Saved Wiper Position on
Power-Up.
• Standby Current <3µA Max
• VCC: 2.7V to 5.5V Operation
• 100kEnd to End Resistance
• 100 yr. Data Retention
• Endurance: 100,000 Data Changes Per Bit Per Register
• 14 Ld TSSOP
• Low Power CMOS
• Single Supply Version of the X9110
• Pb-Free Plus Anneal Available (RoHS Compliant)
Pinout
SO
A0
NC
CS
SCK
SI
VSS
TSSOP
1 14
2 13
3 12
4 X9111 11
5 10
69
78
VCC
RL
RH
RW
HOLD
A1
WP
RH
SPI
Bus
Interface
Address
Data
Status
Bus
Interface &
Control
Write
Read
Transfer
Control
Power On Recall
Wiper Counter
Register (WCR)
Data Registers
(DR0-DR3)
Wiper
100k
1024-taps
POT
VSS
NC RW RL
1 CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 1-888-468-3774 | Intersil (and design) is a registered trademark of Intersil Americas Inc.
Copyright Intersil Americas Inc. 2005, 2006. All Rights Reserved
XDCP is a trademark of Intersil Americas Inc. All other trademarks mentioned are the property of their respective owners.

PagesPages 17
Télécharger [ X9111 ]


Fiche technique recommandé

No Description détaillée Fabricant
X9110 Single Digitally-Controlled (XDCP) Potentiometer Xicor
Xicor
X9110 Single Digitally Controlled Potentiometer Intersil
Intersil
X9111 Single Digitally-Controlled Potentiometer Xicor
Xicor
X9111 Single Digitally Controlled Potentiometer Intersil
Intersil

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche