PDF RFM26W Data sheet ( Hoja de datos )

Número de pieza	RFM26W
Descripción	ISM Transceiver module
Fabricantes	HOPERF
Logotipo
Hay una vista previa y un enlace de descarga de RFM26W (archivo pdf) en la parte inferior de esta página. Total 30 Páginas
No Preview Available ! RFM26W RFM26W ISM Transceiver module Features Frequency range = 142–1050 MHz Receive sensitivity = –126 dBm Modulation (G)FSK & 4(G)FSK OOK & ASK +20 dBmMax output power PA support for +27dBm Low active power consumption 10/13 mA RX Ultra low current powerdown modes 30 nA shutdown, 50 nA standby Data rate = 0.123 kbps to 1Mbps Fast wake and hop times Applications Power supply = 1.8 to 3.6 V Excellent selectivity performance 50 dB adjacent channel > 73 dB blocking at 1 MHz Antenna diversity and T/R switch control Highly configurable packet handler TX and RX 64 byte FIFOs Auto frequency control (AFC) Automatic gain control (AGC) Low Battery Detector Low BOM Temperature Sensor Smart metering (802.15.4g & Mbus) Remote control Home security and alarm Telemetry Garage and gate openers Remote keyless entry Home automation Industrial control Sensor networks Health monitors Description The RFM26W module is high-performance, low current transceiver covering the sub-GHz frequency bands from 142 to1050 MHz. It offers outstanding sensitivity of –126 dBm while achieving extremely low active and standby current consumption. The RFM26W offers continuous frequency coverage across the entire sub-GHz band from 142–1050 MHz with extremely fine frequency resolution. The RFM26W includes optimal phase noise, blocking, and selectivity performance for narrow band and licensed band applications such as FCC Part90 and 169 MHz wireless Mbus. The 50 dB adjacent channel selectivity with 25 kHz channel spacing ensures robust receive operation in harsh RF conditions, which is particularly important for narrowband operation. The RFM26W offers exceptional output power of up to +20 dBm with outstanding TX efficiency. The high output power and sensitivity results in an industry leading link budget of 146 dB allowing extended ranges and highly robust communication links. The RFM26W can achieve up to +27 dBm output power with built in ramping control of a low-cost, external FET. The devices are compliant with all worldwide regulatory standards:The module is compliant with all worldwide regulatory standards: FCC, ETSI, and ARIB. All devices are designed to be compliant with 802.15.4g and WMbus smart metering standards. V 1.1 RFM26W Tel: +86-755-82973805 Fax: +86-755-82973550 E-mail: [email protected] http:/ / www.hoperf.com 1 1 page RFM26W Table 2. Synthesizer AC Electrical Characteristics1 Parameter Synthesizer Frequency Range Symbol FSYN Conditions Min Typ Max Units 142 — 175 MHz 284 — 350 MHz 425 — 525 MHz Synthesizer Frequency Resolution2 FRES-960 FRES-525 FRES-350 850—1050 425—525 283—350 850 — 1050 — 57.22 — — 28.61 — — 19.07 — MHz Hz Hz Hz Synthesizer Settling Time2 FRES-175 tLOCK 142—175 — 9.54 — Measured from leaving Ready mode with XOSC running to any frequency — 50 — includ-ing VCO Calibration Hz μs ΔF = 10 kHz, 460MHz — –106 — dBc/Hz Phase Noise2 Lφ(fM) ΔF = 100 kHz, 460MHz ΔF = 1 MHz, 460MHz — –120 — –123 — dBc/Hz — dBc/Hz ΔF = 10 MHz, 460MHz — –130 — dBc/Hz Notes: 1. All specification guaranteed by production test unless otherwise noted. Production test conditions and max limits are listed in the "Production Test Conditions" section in "1.1. Definition of Test Conditions" on page 11. 2. Guaranteed by qualification. Qualification test conditions are listed in the "Qualification Test Conditions" section in "1.1.Definition of Test Conditions" on page 11. Tel: +86-755-82973805 Fax: +86-755-82973550 E-mail: [email protected] http:/ / www.hoperf.com 5 5 Page 1.1. Definition of Test Conditions Production Test Conditions: TA = +25 °C VDD = +3.3 VDC Sensitivity measured at 919 MHz TX output power measured at 915 MHz External reference signal (XOUT) = 1.0 VPP at 30 MHz, centered around 0.8 VDC Production test schematic (unless noted otherwise) All RF input and output levels referred to the pins of the RFM26W module Qualification Test Conditions: TA = –40 to +85 °C VDD = +1.8 to +3.6 VDC Using TX/RX Split Antenna reference design or production test schematic All RF input and output levels referred to the pins of the RFM26W Module RFM26W Tel: +86-755-82973805 Fax: +86-755-82973550 E-mail: [email protected] http:/ / www.hoperf.com 11 11 Page

Páginas	Total 30 Páginas
PDF Descargar	[ Datasheet RFM26W.PDF ]

Hoja de datos destacado

Número de pieza	Descripción	Fabricantes
RFM26W	ISM Transceiver module	HOPERF

Número de pieza	Descripción	Fabricantes
SLA6805M	High Voltage 3 phase Motor Driver IC.	Sanken
SDC1742	12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.	Analog Devices

DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.

DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar