|
|
PDF LC75841PE Data sheet ( Hoja de datos )
| Número de pieza | LC75841PE | |
| Descripción | 1/2-Duty Drive General-Purpose LCD Display Driver | |
| Fabricantes | ON Semiconductor | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de LC75841PE (archivo pdf) en la parte inferior de esta página. Total 18 Páginas | ||
|
No Preview Available !
Ordering number : ENA1578
LC75841PE
CMOS IC
Static Drive, 1/2-Duty Drive
General-Purpose LCD
Display Driver
http://onsemi.com
Overview
The LC75841PE is static drive or 1/2-duty drive, microcontroller-controlled general-purpose LCD driver that can be
used in applications such as frequency display in products with electronic tuning. In addition to being capable to drive
up to 54 segments directly, it can control up to 4 general-purpose output ports.
Features
• Serial data control of switching between static drive mode and 1/2 duty drive mode.
When 1/1-duty: Capable of driving up to 27 segments
When 1/2-duty: Capable of driving up to 54 segments
• Serial data input supports CCB format communication with the system controller.
• Serial data control of the power-saving mode based backup function and the all segments forced off function.
• Serial data control of switching between the segment output port and general-purpose output port functions
(up to 4 general-purpose output ports).
• Serial data control of the frame frequency of the common and segment output waveforms.
• Either RC oscillator operating or external clock operating mode can be selected with the serial control data.
• High generality, since display data is displayed directly without the intervention of a decoder circuit.
• The INH pin allows the display to be forced to the off state.
• Allows compatible operation with the LC75842 (842 mode transfer function).
• CCB is ON Semiconductor® ’s original format. All addresses are managed
by ON Semiconductor® for this format.
• CCB is a registered trademark of Semiconductor Components Industries, LLC.
Semiconductor Components Industries, LLC, 2013
July, 2013
N1809HKIM 20091006-S00001 No.A1578-1/18
1 page  
Package Dimensions
unit:mm (typ)
3162C
9.0
7.0
27 19
28 18
LC75841PE
36
1
(0.9)
0.65
10
9
0.3
0.15
SANYO : QFP36(7X7)
Pin Assignment
OSC
VDD
INH
VSS
CE
CL
DI
COM2
COM1
28
29
30
31
32
33
34
35
36
LC75841PE
18 S18
17 S17
16 S16
15 S15
14 S14
13 S13
12 S12
11 S11
10 S10
Top view
No.A1578-5/18
5 Page 
LC75841PE
Control Data Functions
1. P0 to P2: Segment output port/general-purpose output port switching control data
These control data bits switch the segment output port/general-purpose output port functions of the S1/P1 to S4/P4
output pins.
However, segment output port is forcibly selected when in 842 mode data transfer.
Control data
Output pin state
P0 P1 P2
S1/P1
S2/P2
S3/P3
S4/P4
000
S1
S2
S3
S4
001
P1
S2
S3
S4
010
P1
P2
S3
S4
011
P1
P2
P3
S4
100
P1
P2
Note: Sn (n = 1 to 4): Segment output ports
Pn (n = 1 to 4): General-purpose output ports
P3
P4
Note that when the general-purpose output port function is selected, the correspondence between the output pins and
the display data will be that shown in the table.
Output pin
Corresponding display data
Static drive mode
1/2 duty drive mode
S1/P1
D1
D1
S2/P2
D2
D3
S3/P3
D3
D5
S4/P4
D4
D7
For example, if the general-purpose output port function is selected for the S4/P4 output pin in 1/2 duty drive mode,
it will output a high level (VDD) when display data D7 is 1, and a low level (VSS) when D7 is 0.
2. DT: Static drive mode or 1/2 duty drive mode switching control data
This control data bit selects either static drive mode or 1/2 duty drive mode.
However, 1/2 duty drive mode is forcibly selected when in 842 mode data transfer.
DT
Duty drive mode
Output pin state (COM2)
0 Static drive mode
1 1/2 duty drive mode
Note: COM2…Common output
VSS level
COM2
3. FC0 to FC2: Common/segment output waveform frame frequency control data
These control data bits set the frame frequency of the common and segment output waveforms.
However, fo=fosc/384 is forcibly selected when in 842 mode data transfer.
Control data
FC0 FC1
FC2
Frame frequency fo [Hz]
1 1 0 fosc/768, fCK/768
1 1 1 fosc/576, fCK/576
0 0 0 fosc/384, fCK/384
0 0 1 fosc/288, fCK/288
0 1 0 fosc/192, fCK/192
No.A1578-11/18
11 Page | ||
| Páginas | Total 18 Páginas | |
| PDF Descargar | [ Datasheet LC75841PE.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| LC75841PE | 1/2-Duty Drive General-Purpose LCD Display Driver | ON Semiconductor |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |