DataSheetWiki

APL5606 Datasheet دیتاشیت PDF دانلود

دیتاشیت - ANPEC - Low Dropout 600mA Linear Regulator

شماره قطعه APL5606
شرح مفصل Low Dropout 600mA Linear Regulator
تولید کننده ANPEC 
آرم ANPEC 


1 Page

		

No Preview Available !

APL5606 شرح
APL5606/A
Low Dropout 600mA Linear Regulator for DC Fan Control
Features
General Description
Low Dropout Voltage: 220mV (typical) @ 600mA
Low Quiescent Current: 140µA
Selectable Adjustable/Full Speed Mode
O/I Voltage Ratio in Adjustable Mode : 1.6 times
Stable with Low ESR Ceramic Capacitors
Over-Temperature Protection
Current-Limit Protection with Foldback Current
Internal Soft-Start
SOP-8 Package
Lead Free and Green Devices Available
(RoHS Compliant)
Simplified Application Circuit
VIN
C1
1µF
Adjustable mode
Full speed mode
VIN VOUT
APL5606/A
FSM
GND
VSE
T
VOUT
C2
2.2µF
Speed control
voltage (VSET)
The APL5606/A is a low quiescent current and low drop-
out linear regulator which is designed with a P-channel
pass MOSFET to power a DC fan and delivers output
current up to 600mA. In adjustable mode, the output
voltage follows the 1.6 times of the voltage on VSET pin to
dynamically adjust the DC fan speed; in full speed mode,
the internal P-channel MOSFET fully turns on to drive the
DC fan with maximum supply voltage for full speed
operation.The APL5606/A with low 140µA quiescent cur-
rent is ideal for battery-powered system appliances. It
is also stable with a low-ESR ceramic output capacitor (
2.2µF typical) to reduce total cost and to minimize the
PCB area required. The APL5606/A features current-limit
(with foldback current) and over-temperature protections
to protect the device against current over-loads and over-
temperature. The APL5606/A is available in a SOP-8
package.
Applications
Notebook Fan Driver
Motherboards
PC Peripherals
Battery-Powered System
Ordering and Marking Information
APL5606/A
Assembly Material
Handling Code
Temperature Range
Package Code
Package Code
K : SOP-8
Operating Ambient Temperature Range
I : -40 to 85 oC
Handling Code
TR : Tape & Reel
Assembly Material
L : Lead Free Device
G : Halogen and Lead Free Device
APL5606/A K : APL5606
XXXXX
APL5606A
XXXXX
XXXXX - Date Code
Note: ANPEC lead-free products contain molding compounds/die attach materials and 100% matte tin plate termination finish; which
are fully compliant with RoHS. ANPEC lead-free products meet or exceed the lead-free requirements of IPC/JEDEC J-STD-020D for
MSL classification at lead-free peak reflow temperature. ANPEC defines “Green” to mean lead-free (RoHS compliant) and halogen
free (Br or Cl does not exceed 900ppm by weight in homogeneous material and total of Br and Cl does not exceed 1500ppm by
weight).
ANPEC reserves the right to make changes to improve reliability or manufacturability without notice, and
advise customers to obtain the latest version of relevant information to verify before placing orders.
Copyright © ANPEC Electronics Corp.
Rev. A.4 - Dec., 2010
1
www.anpec.com.tw

قانون اساسیصفحه 16
دانلود [ APL5606 دیتاشیت ]



دیتاشیت توصیه

شماره قطعه شرح مفصل تولید کنندگان
APL5601 (APL5601 / APL5602) Low Dropout 600mA Fixed Voltage Linear Regulator ANPEC
ANPEC
APL5602 (APL5601 / APL5602) Low Dropout 600mA Fixed Voltage Linear Regulator ANPEC
ANPEC
APL5603 Low Dropout 600mA Fixed Voltage Linear Regulator ANPEC
ANPEC
APL5605 600mA Linear Regulator ANPEC
ANPEC

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2018   |   تماس با ما  |   جستجو