ASM1834D Datasheet دیتاشیت PDF دانلود

دیتاشیت - ON Semiconductor - Power Supply Supervisor

شماره قطعه	ASM1834D
شرح مفصل	Power Supply Supervisor
تولید کننده	ON Semiconductor
آرم
1 Page No Preview Available ! ASM1834, ASM1834A, ASM1834D Dual 5 V and 3.3 V mP Power Supply Supervisor with Manual Reset Description The ASM1834 supervisors simultaneously monitor both 3.3 V and 5 V power sources and generate reset signals when either supply is out of tolerance. When an out−of−tolerance condition is detected, the output−reset signal of the affected supply becomes active and resets the system microprocessor/microcontroller. On power−up and after the supply voltage returns to an in−tolerance condition, the reset signal remains active for approximately 350 ms. This allows the power supply and system microprocessor to stabilize. Tolerance levels are independently selectable for both supplies. Tolerance options are 5% and 10% for the 5 V supply and 10% and 20% for the 3.3 V supply. The ASM1834 and ASM1834D have push−pull reset output stages. The ASM1834A reset outputs are open drain devices that can both be connected to either 5 V or 3.3 V supply. The ASM1834 and ASM1834A have active LOW reset outputs. The ASM1834D has active HIGH reset outputs. All devices can generate reset signals through an internally debounced pushbutton reset input that affects both reset outputs. All devices operate over the extended industrial temperature range. Devices are available in 8−pin DIP, surface mount 8−pin SO and 8−Pin MicroSO packages. Die are also available. http://onsemi.com PDIP−8 NO SUFFIX CASE 646AA MICRO−8 U SUFFIX CASE 846AA SOIC−8 S SUFFIX CASE 751BD PIN CONFIGURATION 5VIN 5V RESET* 5V TOL GND 1 ASM1834 ASM1834A ASM1834D (Top View) 3.3VIN 3.3V RESET* 3.3V TOL PBRST *AS1834D reset outputs are active HIGH (5V RESET and 3.3V RESET) Outputs are open−drain for AS1834A. Features • Monitors 5 V and 3.3 V Supplies Simultaneously • 5 V and 3.3 V Power−on Reset • 350 ms Reset Time • Debounced Pushbutton Reset Input • Push−pull CMOS Output ASM1834, ASM1834D Eliminates External Pull−up Resistors Active LOW (ASM1834), HIGH (ASM1834D) • Open Drain Output ASM1834A Active LOW • Selectable 5 V and 3.3 V Trip Point Tolerance • Internal Power Drawn from Highest Input Voltage, 5 V or 3.3 V • Precision Temperature−compensated Voltage Reference and Comparator • Low Cost Surface Mount SO, Compact MicroSO and DIP Packages • Wide Operating Temperature: −40°C to +85°C ORDERING INFORMATION See detailed ordering and shipping information in the package dimensions section on page 11 of this data sheet. Applications • Microprocessors • PDAs, Hand−held PCs • Embedded Controllers • Telecommunication Systems • Power Supplies • Wireless / Cellular Systems • Networking Hardware © Semiconductor Components Industries, LLC, 2011 August, 2011 − Rev. 3 1 Publication Order Number: ASM1834/D
قانون اساسی	صفحه 11
دانلود	[ ASM1834D دیتاشیت ]

دیتاشیت توصیه

شماره قطعه	شرح مفصل	تولید کنندگان
ASM1834	Dual 5V and 3.3V uP Power Supply Supervisor	Alliance Semiconductor
ASM1834	Power Supply Supervisor	ON Semiconductor
ASM1834A	Dual 5V and 3.3V uP Power Supply Supervisor	Alliance Semiconductor
ASM1834A	Power Supply Supervisor	ON Semiconductor

US18650VTC5A	Lithium-Ion Battery	Sony
TSPC106	PCI Bus Bridge Memory Controller	ATMEL
TP9380	NPN SILICON RF POWER TRANSISTOR	Advanced Semiconductor