DataSheetWiki


LC898113 fiches techniques PDF

ON Semiconductor - Optical Image Stabilization (OIS) Controller & Driver

Numéro de référence LC898113
Description Optical Image Stabilization (OIS) Controller & Driver
Fabricant ON Semiconductor 
Logo ON Semiconductor 





1 Page

No Preview Available !





LC898113 fiche technique
LC898113
CMOS LSI
Optical Image Stabilization (OIS)
Controller & Driver
www.onsemi.com
Overview
The LC898113 is device integrating digital gyro interface, gyro filter, stepping motor control circuit, and motor driver
functions needed to implement an Optical Image Stabilization (OIS) system using stepping motors. These functions
make it possible to build a system using a minimal software program that enables the host microcontroller to turn
Optical Image Stabilization (OIS) on and off, for example.
The gyro filter coefficients may be set to any values by the host microcontroller, making it possible to build filter
circuits optimized for the system. The LC898113 integrates a signal determination circuit for pan/tilt processing and a
filter circuit, enabling implementation of a variety of processing in response to camera movements.
The LC898113 integrates four saturation-drive H-bridge channels for stepping motor drive, and PWM drive with 1-2-
phase control to 8W1-2-phase control is supported.
Also integrated are a photo sensor drive circuit for control object position detection (for example, a CMOS sensor), a
position determination circuit, and a circuit for moving to the optical center based on the results from the preceding
circuits. Thus, the host microcontroller can specify detection start and the LC898113 will automatically move the
control object to the initial position.
Both SPI and I2C are supported as serial interfaces for communication with the host microcontroller. This allows the
customer to choose based on the specifications of the host microcontroller. The I2C interface also supports a 1.8 V
interface.
Features
Serial interface
SPI (mode0, mode3)
I2C (F/S mode)
Selection with MODE0 pin
Built in Gyro filter
Digital Gyro Support
Built in Digital Gyro I/F for each manufacturer
Stepping motor drive mode
1-2 phase
W1-2 phase
2W1-2 phase
4W1-2 phase
8W1-2 phase
LFLGA49 4x4 / FLGA49
Continued on next page.
* I2C Bus is a trademark of Philips Corporation.
ORDERING INFORMATION
See detailed ordering and shipping information on page 7 of this data sheet.
© Semiconductor Components Industries, LLC, 2015
April 2015 - Rev. 1
1
Publication Order Number :
LC898113/D

PagesPages 7
Télécharger [ LC898113 ]


Fiche technique recommandé

No Description détaillée Fabricant
LC898111AXA OIS Controller & Driver ON Semiconductor
ON Semiconductor
LC898111AXA-MH OIS Controller & Driver ON Semiconductor
ON Semiconductor
LC898111AXB OIS Controller & Driver ON Semiconductor
ON Semiconductor
LC898111AXB-MH OIS Controller & Driver ON Semiconductor
ON Semiconductor

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche