DataSheetWiki


MAX15004B fiches techniques PDF

Maxim Integrated - 4.5V to 40V Input Automotive Flyback/Boost/SEPIC Power-Supply Controllers

Numéro de référence MAX15004B
Description 4.5V to 40V Input Automotive Flyback/Boost/SEPIC Power-Supply Controllers
Fabricant Maxim Integrated 
Logo Maxim Integrated 





1 Page

No Preview Available !





MAX15004B fiche technique
EVALUATION KIT AVAILABLE
MAX15004A/B-MAX15005A/B
General Description
The MAX15004A/B/MAX15005A/B high-performance,
current-mode PWM controllers operate at an automotive
input voltage range from 4.5V to 40V (load dump). The
input voltage can go lower than 4.5V after startup if IN is
bootstrapped to a boosted output voltage. The controllers
integrate all the building blocks necessary for implementing
fixed-frequency isolated/nonisolated power supplies. The
general-purpose boost, flyback, forward, and SEPIC con-
verters can be designed with ease around the MAX15004/
MAX15005.
The current-mode control architecture offers excellent line-
transient response and cycle-by-cycle current limit while
simplifying the frequency compensation. Programmable
slope compensation simplifies the design further. A fast
60ns current-limit response time, low 300mV current-limit
threshold makes the controllers suitable for high-efficiency,
high-frequency DC-DC converters. The devices include
an internal error amplifier and 1% accurate reference to
facilitate the primary-side regulated, single-ended flyback
converter or nonisolated converters.
An external resistor and capacitor network programs the
switching frequency from 15kHz to 500kHz (1MHz for
the MAX15005A/B). The MAX15004A/B/MAX15005A/B
provide a SYNC input for synchronization to an
external clock. The maximum FET-driver duty cycle for the
MAX15004A/B is 50%. The maximum duty cycle can be
set on the MAX15005A/B by selecting the right combina-
tion of RT and CT.
The input undervoltage lockout (ON/OFF) programs the
input-supply startup voltage and can be used to shutdown
the converter to reduce the total shutdown current down
to 10µA. Protection features include cycle-by-cycle and
hiccup current limit, output over-voltage protection, and
thermal shutdown.
The MAX15004A/B/MAX15005A/B are available in space-
saving 16-pin TSSOP and thermally enhanced 16-pin
TSSOP-EP packages. All devices operate over the -40°C
to +125°C automotive temperature range.
Applications
● Automotive
● Vacuum Fluorescent Display (VFD) Power Supply
● Isolated Flyback, Forward, Nonisolated SEPIC, Boost
Converters
Pin Configuration appears at end of data sheet.
4.5V to 40V Input Automotive
Flyback/Boost/SEPIC
Power-Supply Controllers
Benefits and Features
● Wide Supply Voltage Range Meets Automotive
Power-Supply Operating Requirement Including
“Cold Crank” Conditions
• 4.5V to 40V Operating Input Voltage Range
(Can Operate at Lower Voltage After Startup if
Input is Bootstrapped to a Boosted Output)
● Control Architecture Offers Excellent Performance
While Simplifying the Design
• Current-Mode Control
• 300mV, 5% Accurate Current-Limit Threshold
Voltage
• Programmable Slope Compensation
• 50% (MAX15004) or Adjustable (MAX15005)
Maximum Duty Cycle
● Accurate, Adjustable Switching Frequency and
Synchronization Avoids Interference with Sensitive
Radio Bands
• Switching Frequency Adjustable from 15kHz to
500kHz (1MHz for the MAX15005A/B)
• RC Programmable 4% Accurate Switching
Frequency
• External Frequency Synchronization
● Built-In Protection Capability for Improved System
Reliability
• Cycle-by-Cycle and Hiccup Current-Limit
Protection
• Overvoltage and Thermal-Shutdown Protection
• -40°C to +125°C Automotive Temperature Range
• AEC-Q100 Qualified
Ordering Information
PART
PIN-PACKAGE MAX DUTY CYCLE
MAX15004AAUE+ 16 TSSOP-EP*
50%
MAX15004AAUE/V+ 16 TSSOP-EP*
50%
MAX15004BAUE+ 16 TSSOP
50%
MAX15004BAUE/V+ 16 TSSOP
50%
MAX15005AAUE+ 16 TSSOP-EP*
Programmable
MAX15005AAUE/V+ 16 TSSOP-EP*
Programmable
MAX15005BAUE+ 16 TSSOP
Programmable
MAX15005BAUE/V+ 16 TSSOP
Programmable
Note: All devices are specified over the -40°C to +125°C
temperature range.
+Denotes a lead(Pb)-free/RoHS-compliant package.
/V denotes an automotive qualified part.
*EP = Exposed pad.
19-0723; Rev 5; 9/15

PagesPages 27
Télécharger [ MAX15004B ]


Fiche technique recommandé

No Description détaillée Fabricant
MAX15004 (MAX15004 / MAX15005) 4.5V to 40V Input Automotive Flyback/Boost/SEPIC Power-Supply Controllers Maxim Integrated Products
Maxim Integrated Products
MAX15004A 4.5V to 40V Input Automotive Flyback/Boost/SEPIC Power-Supply Controllers Maxim Integrated
Maxim Integrated
MAX15004B 4.5V to 40V Input Automotive Flyback/Boost/SEPIC Power-Supply Controllers Maxim Integrated
Maxim Integrated

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche