RN-42-N Datasheet PDF - Roving Networks
| Part Number | RN-42-N | |
| Description | Class 2 Bluetooth Module | |
| Manufacturers | Roving Networks | |
| Logo |  |
|
|
There is a preview and RN-42-N download ( pdf file ) link at the bottom of this page. Total 10 Pages | ||
Preview 1 page No Preview Available !
www.rovingnetworks.com
RN-42/RN-42-N Data Sheet
DS-RN42-V1.0 12/6/2010
Class 2 Bluetooth® Module
Features
Fully qualified Bluetooth 2.1/2.0/1.2/1.1
module
Bluetooth v2.0+EDR support
Available with on board chip antenna (RN-
42) and without antenna (RN-42-N)
Postage stamp sized form factor, 13.4mm x
25.8 mm x 2mm (RN-42) and 13.4mm x 20
mm x 2 mm (RN-42-N)
Low power (26uA sleep, 3mA connected,
30mA transmit)
UART (SPP or HCI) and USB (HCI only)
data connection interfaces.
Sustained SPP data rates - 240Kbps (slave),
300Kbps (master)
HCI data rates - 1.5Mbps sustained, 3.0Mbps
burst in HCI mode
Embedded Bluetooth stack profiles included
(requires no host stack): GAP, SDP,
RFCOMM and L2CAP protocols, with SPP
and DUN profile support.
Bluetooth SIG certified
Castellated SMT pads for easy and reliable
PCB mounting
Certifications: FCC, ICS, CE
Environmentally friendly, RoHS compliant
Applications
Cable replacement
Barcode scanners
Measurement and monitoring systems
Industrial sensors and controls
Medical devices
Barcode readers
Computer accessories
Description
The RN42 is a small form factor, low power, highly
economic Bluetooth radio for OEM’s adding wireless
capability to their products. The RN42 supports
multiple interface protocols, is simple to design in and
fully certified, making it a complete embedded
Bluetooth solution. The RN 42 is functionally
compatible with RN 41. With its high performance on
chip antenna and support for Bluetooth® Enhanced
Data Rate (EDR), the RN42 delivers up to 3 Mbps
data rate for distances to 20M. The RN-42 also
comes in a package with no antenna (RN-42-N).
Useful when the application requires an external
antenna, the RN-42-N is shorter in length and has RF
pads to route the antenna signal.
Block Diagram
Crystal
RF
Switch
PA BALUN
CSR BlueCore-04
External
VCC
GND
PIO4
PIO5
PIO6
USB
UART
PCM
Flash
Memory
~1~
|
| |
 
www.rovingnetworks.com
RN-42/RN-42-N Data Sheet
DS-RN42-V3.1 12/6/2010
Typical Application Circuit
Since the RN 41 and RN 42 are functionally compatible, this application diagram applies to RN 41 and RN 42.
~5~
Preview 5 Page |
Part DetailsOn this page, you can learn information such as the schematic, equivalent, pinout, replacement, circuit, and manual for RN-42-N electronic component. |
| Information | Total 10 Pages | |
| Link URL | [ Copy URL to Clipboard ] | |
| Download | [ RN-42-N.PDF Datasheet ] | |
Share Link :
Electronic Components Distributor
|
An electronic components distributor is a company that sources, stocks, and sells electronic components to manufacturers, engineers, and hobbyists. |
| SparkFun Electronics | Allied Electronics | DigiKey Electronics | Arrow Electronics |
| Mouser Electronics | Adafruit | Newark | Chip One Stop |
Featured Datasheets
| Part Number | Description | MFRS |
| RN-42-N | The function is Class 2 Bluetooth Module. Roving Networks | |
Semiconductors commonly used in industry:
1N4148 |
BAW56 |
1N5400 |
NE555 | | ||
Quick jump to:
RN-4
1N4
2N2
2SA
2SC
74H
BC
HCF
IRF
KA | ||