DataSheetWiki


HFCT-53D5 fiches techniques PDF

Avago - 1 x 9 Fiber Optic Transceivers

Numéro de référence HFCT-53D5
Description 1 x 9 Fiber Optic Transceivers
Fabricant Avago 
Logo Avago 





1 Page

No Preview Available !





HFCT-53D5 fiche technique
HFBR-53D5 Family, 850 nm VCSEL
HFCT-53D5 Family, 1300 nm FP Laser
1 x 9 Fiber Optic Transceivers for Gigabit Ethernet
Data Sheet
Description
The HFBR/HFCT-53D5 transceiver from Avago
Technologies allows the system designer to implement
a range of solutions for multimode and single mode
Gigabit Ethernet applications.
The overall Avago Technologies transceiver product
consists of three sections: the transmitter and receiver
optical subassemblies, an electrical subassembly, and
the package housing which incorporates a duplex SC
connector receptacle.
Transmitter Section
The transmitter section of the HFBR-53D5 consists of
an 850 nm Vertical Cavity Surface Emitting Laser
(VCSEL) in an optical subassembly (OSA), which mates
to the fiber cable. The HFCT-53D5 incorporates a 1300
nm Fabry-Perot (FP) Laser designed to meet the Gigabit
Ethernet LX specification. The OSA is driven by a
custom, silicon bipolar IC which converts differential
PECL logic signals (ECL referenced to a +5 Volt supply)
into an analog laser diode drive current.
Receiver Section
The receiver of the HFBR-53D5 includes a silicon PIN
photodiode mounted together with a custom, silicon
bipolar transimpedance preamplifier IC in an OSA. This
OSA is mated to a custom silicon bipolar circuit that
provides post-amplification and quantization. The
HFCT-53D5 utilizes an InP PIN photodiode in the same
configuration. The post-amplifier also includes a Signal
Detect circuit which provides a PECL logic-high output
upon detection of a usable input optical signal level.
This singleended PECL output is designed to drive a
standard PECL input through a 50 W PECL load.
Features
Compliant with Specifications for IEEE- 802.3z
Gigabit Ethernet
Industry Standard Mezzanine Height 1 x 9 Package
Style with Integral Duplex SC Connector
Performance
HFBR-53D5:
220 m with 62.5/125 mm MMF
500 m with 50/125 mm MMF
HFCT-53D5:
550 m with 62.5/125 mm MMF
550 m with 50/125 mm MMF
10 km with 9/125 SMF
IEC 60825-1 Class 1/CDRH Class I Laser Eye Safe
Single +5 V Power Supply Operation with PECL
Logic Interfaces
Wave Solder and Aqueous Wash Process
Compatible
Related Products
Physical Layer ICs Available for Optical or Copper
Interface (HDMP-1636A/1646A)
Versions of this Transceiver Module Also Available
for Fibre Channel (HFBR/HFCT-53D3)
Gigabit Interface Converters (GBIC) for Gigabit
Ethernet (CX, SX, LX)
Applications
Switch to Switch Interface
Switched Backbone Applications
High Speed Interface for File Servers
High Performance Desktops

PagesPages 18
Télécharger [ HFCT-53D5 ]


Fiche technique recommandé

No Description détaillée Fabricant
HFCT-53D5 1 x 9 Fiber Optic Transceivers Avago
Avago

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche