DataSheetWiki


AFBR-4526Z fiches techniques PDF

Avago - Plastic optical fiber duplex connector

Numéro de référence AFBR-4526Z
Description Plastic optical fiber duplex connector
Fabricant Avago 
Logo Avago 





1 Page

No Preview Available !





AFBR-4526Z fiche technique
AFBR-4526Z, AFBR-452BZ
Plastic optical fiber duplex connector for AFBR-5972xZ
Data Sheet
Description
The AFBR-452xZ duplex connectors are designed for use
with Avago Technologies’ fast Ethernet transceiver AFBR-
5972xZ. The rugged design contains a latching mecha-
nism for an increased retention force. The simple snap-
together concept saves the user labor and tool cost.
The connectors are made of a rugged, flame retardant
plastic which is good for industrial and other harsh envi-
ronments. The AFBR-452xZ duplex connectors are for use
with Plastic Optical Fiber (POF) only.
For termination of POF with AFBR-452xZ, we recommend
to use the polishing kit AFBR-4594Z.
Absolute maximum ratings
Parameter
Storage and operating temperature
Recommended operation temperature
Installation temperature
Min
-40
-40
0
Features
ULTEM Plastic Material (UL File #E121562)
Available in two colors: black and blue
Suitable for 1mm diameter duplex plastic optical fiber
(POF)
Latching mechanism for increased retention force
Easy installation of POF links with AFBR-5972xZ
Applications
Industrial data links for factory automation and plant
control
Intra-system links, board-to-board, rack-to-rack
Medical instruments
High voltage isolation
Max Unit Note
85 °C 1
85 °C 1
70 °C 1
Mechanical characteristics
Parameter
Min Typ. Max Unit Temp. [°C]
Note
Retention force, connector to transceiver;
latching button pressed
15 20
N 25
2
Retention force, connector to transceiver;
latching button NOT pressed
24
8
N 25
-40 to +85
2,3
Tensile force, connector to cable
90 N
2
Insertion force, connector to transceiver
20 N
2
Notes:
1. Storage and operating temperatures refer to the ranges over which the connectors can be used when not subjected to mechanical stress.
Installation temperature refers to the ranges over which connectors may be installed onto the fiber and over which connectors can be connected
and disconnected from the trnasceiver.
2. Typical data at 25°C.
3. CAUTION - The latching mechanism release button should be pressed before attempting to disconnect the fiber. If the connector is pulled out of
the transceiver without pressing the lever, damage will occur.

PagesPages 4
Télécharger [ AFBR-4526Z ]


Fiche technique recommandé

No Description détaillée Fabricant
AFBR-4526Z Plastic optical fiber duplex connector Avago
Avago

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche