TDA9886 Datasheet PDF - Philips
| Part Number | TDA9886 | |
| Description | I2C-bus controlled single and multistandard alignment-free IF-PLL demodulators | |
| Manufacturers | Philips | |
| Logo |  |
|
|
There is a preview and TDA9886 download ( pdf file ) link at the bottom of this page. Total 30 Pages | ||
Preview 1 page No Preview Available !
INTEGRATED CIRCUITS
DATA SHEET
TDA9885; TDA9886
I2C-bus controlled single and
multistandard alignment-free
IF-PLL demodulators
Product specification
Supersedes data of 2002 Mar 05
2003 Oct 02
|
| |
 
Philips Semiconductors
I2C-bus controlled single and multistandard
alignment-free IF-PLL demodulators
Product specification
TDA9885; TDA9886
SYMBOL
PARAMETER
CONDITIONS
MIN. TYP. MAX. UNIT
Audio part
Vo(AF)(rms)
THD
BAF(−3dB)
S/NW(AF)
αAM(sup)
PSRRAUD
Vo(intc)(rms)
AF output voltage (RMS value)
total harmonic distortion of audio
signal
−3 dB AF bandwidth
weighted signal-to-noise ratio of
audio signal
AM suppression of
FM demodulator
power supply ripple rejection on
pin AUD
IF intercarrier output level
(RMS value)
27 kHz FM deviation;
50 µs de-emphasis
FM: 27 kHz FM deviation;
50 µs de-emphasis
AM: m = 54 %
without de-emphasis;
dependent on FM-PLL filter
FM: 27 kHz FM deviation;
50 µs de-emphasis;
vision carrier unmodulated
AM: m = 54 %
50 µs de-emphasis;
AM: f = 1 kHz and
m = 54 %; referenced to
27 kHz FM deviation
fripple = 70 Hz; see Fig.6
for AM
for FM
QSS mode; SC1; SC2 off
L standard;
without modulation
intercarrier mode;
PC/SC1 = 20 dB; SC2 off;
note 6
430
−
−
80
52
45
40
20
14
90
90
−
540 650 mV
0.15 0.50 %
0.5 1.0
100 −
%
kHz
56 −
dB
50 −
46 −
dB
dB
26 −
dB
20 −
dB
140 180 mV
140 180 mV
75 −
mV
Reference frequency
fref
Vref(rms)
reference signal frequency
reference signal voltage
(RMS value)
note 7
−
operation as input terminal 80
4
−
− MHz
400 mV
Notes
1. Values of video and sound parameters can be decreased at VP = 4.5 V.
2. For applications without I2C-bus, the time constant (R × C) at the supply must be >1.2 µs (e.g. 1 Ω and 2.2 µF).
3. Condition: luminance range (5 steps) from 0 % to 100 %.
4. AC load: CL < 20 pF and RL > 1 kΩ. The sound carrier frequencies (depending on the TV standard) are attenuated
by the integrated sound carrier traps (see Figs 13 to 18; H (s) is the absolute value of transfer function).
5. S/NW is the ratio of the black-to-white amplitude to the black level noise voltage (RMS value measured on pin CVBS).
B = 5 MHz weighted in accordance with “CCIR 567”.
2003 Oct 02
5
Preview 5 Page |
Part DetailsOn this page, you can learn information such as the schematic, equivalent, pinout, replacement, circuit, and manual for TDA9886 electronic component. |
| Information | Total 30 Pages | |
| Link URL | [ Copy URL to Clipboard ] | |
| Download | [ TDA9886.PDF Datasheet ] | |
Share Link :
Electronic Components Distributor
|
An electronic components distributor is a company that sources, stocks, and sells electronic components to manufacturers, engineers, and hobbyists. |
| SparkFun Electronics | Allied Electronics | DigiKey Electronics | Arrow Electronics |
| Mouser Electronics | Adafruit | Newark | Chip One Stop |
Featured Datasheets
| Part Number | Description | MFRS |
| TDA9880 | The function is Alignment-free multistandard vision and FM sound IF-PLL demodulator. NXP Semiconductors |  |
| TDA9881 | The function is Alignment-free vision and FM sound IF PLL demodulator. NXP Semiconductors | |
| TDA9882 | The function is Alignment-free multistandard vision and QSS FM sound IF PLL demodulator. NXP Semiconductors | |
Semiconductors commonly used in industry:
1N4148 |
BAW56 |
1N5400 |
NE555 | | ||
Quick jump to:
TDA9
1N4
2N2
2SA
2SC
74H
BC
HCF
IRF
KA | ||