|
|
PDF HGM410 Data sheet ( Hoja de datos )
| Número de pieza | HGM410 | |
| Descripción | Genset Controller USER MANUAL | |
| Fabricantes | SMARTGEN | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de HGM410 (archivo pdf) en la parte inferior de esta página. Total 30 Páginas | ||
|
No Preview Available !
HGM400 Series Genset Controller
(HGM410/HGM420)
USER MANUAL
ZHENGZHOU SMARTGEN TECHNOLOGY CO.,LTD
1 page  
1 OVERVIEW
HGM400 Series Genset Controller User Manual
HGM400 series genset controllers integrate digitization, intelligentization and network
technology which are used for genset automation and monitor control system of single
unit to achieve automatic start/stop, data measurement, alarm protection and “three
remote” (remote control, remote measuring and remote communication; SG485
module must be fitted). It fit with LCD display, optional languages interface (Chinese,
English, Spanish, Turkish and Russian), and it is reliable and easy to use.
HGM400 series genset controllers adopt micro-processor technology with precision
parameters measuring, fixed value adjustment, time setting and set value adjusting
and etc. All parameters can be configured from front panel or through programmable
interface (USB to LINK, SG72 adaptor produced by Smartgen is recommended) via
PC. It can be widely used in all types of automatic genset control system with compact
structure, advanced circuits, simple connections and high reliability.
HGM400 Series Genset Controller ISSUE 2015-05-27 Version 1.6 Page 5 of 44
5 Page 
HGM400 Series Genset Controller User Manual
4.3 AUTOMATIC START/STOP OPERATION
Auto mode is selected by pressing the button; a LED besides the button will
illuminate to confirm the operation.
Auto Start Sequence,
1) HGM420: when mains is abnormal (over/under voltage, loss of phase), enter into
“Mains Abnormal Delay” and LCD displays count down time. “Start Delay” timer is
initiated after the delay has expired.
2) HGM410: When “Remote Start” is active, “Start Delay” timer is initiated;
3) “Start Delay” countdown will be displayed on LCD;
4) When start delay is over, preheat relay energizes (if configured), “preheat delay XXs”
information will be displayed on LCD;
5) After the above delay, the Fuel Relay is energized, and then one second later, the
Start Relay is engaged. The engine is cranked for a pre-set time. If the engine fails to
fire during this cranking attempt then the fuel relay and start relay are disengaged for
the pre-set rest period; “crank rest time” begins and wait for the next crank attempt.
6) Should this start sequence continue beyond the set number of attempts, the start
sequence will be terminated, the fourth line of LCD display will be highlighted with
HGM400 Series Genset Controller ISSUE 2015-05-27 Version 1.6 Page 11 of 44
11 Page | ||
| Páginas | Total 30 Páginas | |
| PDF Descargar | [ Datasheet HGM410.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| HGM410 | Genset Controller USER MANUAL | SMARTGEN |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |