|
|
Número de pieza | MBI5907 | |
Descripción | Power switch for scan type LED display | |
Fabricantes | Macroblock | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de MBI5907 (archivo pdf) en la parte inferior de esta página. Total 10 Páginas | ||
No Preview Available ! Macroblock
Preliminary Datasheet
MBI5907
Power switch for scan type LED display
Features
Power switch for scan type LED display
Eliminate upper-ghosting
Eliminate high contrast interference without additional circuit
No color stripe when shorted LED
Operating voltage from 5V to 3.3V
2 output channels, 2A output current per channel
SOP-8 package available
Package MSL level:3
GDT:SOP8-150-1.27
Product Description
MBI5907 is a specific power switch for scan type LED display. It has two output channels, operate from 5V to 3.3V,
supports 2A maximum output current per channel.
Moreover, there are internal circuits to eliminate common problems happened in scan type LED display. Such as
upper ghosting 、high contrast interference* and color stripe which is caused by shorted LED.
*Function of eliminating high contrast interference requires MBI constant current drivers equipped with grayscale
data compensation technology.
Application
LED display
Macroblock, Inc. 2015
6F-4, No.18, Pu-Ting Rd., Hsinchu, Taiwan 30072, R.O.C.
TEL: +886-3-579-0068, FAX: +886-3-579-7534, E-mail: [email protected]
- 1 - May 2015, V1.00
1 page MBI5907
Power switch for scan type LED display
Electrical Characteristics (Vin1 = Vin2=5.0V, Ta=25°C)
Characteristics
Supply Current
Switch On Resistance
EN
Threshold
“H” level
“L” level
Turn-On Time
Turn-Off Time
Pull-up Resistor
Symbol
IDD
Condition
-
RDS(ON)x IOUT = 2A
VIH
VIL
tONx
tOFFx
RIN(up)
EN1 / EN2
EN1 / EN2
Enable ON
Enable OFF
EN1 / EN2
Min.
0.8
-
0.8*VDD
GND
-
-
-
Typ.
1.1
100
-
-
-
-
80
Max.
1.5
Unit
mA
- mΩ
VDD
0.2*VDD
200
300
-
V
V
ns
ns
KΩ
Test Circuit for Electrical Characteristics
VDC
EN1/EN2
Vin Vout1
MBI5907
Vout2
EN1
EN2
GND
Operation Principles
MBI5907 is a dual channel power switch specified for scan type LED display. It integrates two P-MOSFET、gate
driver and discharge control circuit. Each P-MOSFET provides 2A maximum current with 100m ohm ON resistance
(RDS(ON)).
When EN is” LOW”, P-MOS will turn on. While EN is “HIGH”, P-MOS will turn off. Then discharge control circuit will
activate. Discharge circuit will eliminate upper ghosting 、high contrast interference and color stripe of scan type
LED display.
- 5 - May 2015, V1.00
5 Page |
Páginas | Total 10 Páginas | |
PDF Descargar | [ Datasheet MBI5907.PDF ] |
Número de pieza | Descripción | Fabricantes |
MBI5907 | Power switch for scan type LED display | Macroblock |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |